How can I edit out a part of my song in itunes?

I need to edit out a part of my song but keep the rest. And the part I need to edit out is in the middle.

Bakergirl,
You can use iTunes to remove the beginning or end of a song (or both) by setting the Start and Stop times.
But to remove a section from the middle and keep the rest, you will need an audio editor such as Audacity.

Similar Messages

How can I edit and save parts of songs (like a chorus).

How can I edit and save parts of songs (like a chorus).

The iTunes-only way is: figure out where you want your excerpt to begin and end. Right-click the track, Get Info, Options tab, set the Start/Stop times accordingly, and OK out. Right-click again, and choose Create XXX version (where XXX is the format indicated in your Import settings). Right-click one more time, and unset the Start/Stop times.
This procedure will leave the full track in place, and will create a new file and library entry with just your excerpt.

How can I find out what I spent my on in iTunes?

On my bank account it says that I spent $42 on iTunes. However I haven't spent this much money on music or apps. I have checked my purchase history and all the music is from the app 12 days of gifts which is free music and an apple app. How can I find out how this money was spent? Which phone number to I call or what am I meant to do to find out? Any help with this situation is appreciated.

I receive an receipt via email to my Apple ID email address after every purchase - usually within a few days after the purchase.
http://support.apple.com/kb/ht2727

HT3702 HOW CAN I FIND OUT WHO CHARGED MY CREDIT CARD FOR ITUNES

How can I find out who used my credit card for itunes

Call your bank or credit card company.

How do you use only a part of a song from itunes and add it to a movie project?

After I've added video clips and photoes to a movie project, I can't figure out how to use only clips from itunes songs to play in specific parts of movie project...any ideas?

The settings you use to play in iTunes do not get retained in other apps. What you can do is open Garage Band, drag the song from iTunes into a GB track, then edit the song as you like. You can even adjust the fade in/out exactly to the length and duration you want. When the song is trimmed, Share to iTunes, where it will become a separate song. Select that for your slideshow, or place it in an iTunes playlist and use the playlist for your slideshow.
Regards.

How can one find out who made the Garageband song 'For the Mind'

I ask because I have believed for 5 years that I did, it is in my projects folder from 2004. On Saturday I was playing with a new Apple laptop at JB Hi-Fi, I opened the Garageband folder and saw 'For the Mind'. I got a shock, then when I played it I went cold as it was as exactly my version! Either (and this is always a possibility) I am delusional, or I remember uploading a few things in my early use of Garageband, and somehow Apple has paid me a huge compliment and used my project as an example. I would love to know about this, it is driving me crazy now that I don't know. Can anyone shed any light on this please?

Please don't rant at people who are trying to help you. I can tell my own compositions from others', and I'm not paranoid enough to suspect Apple to secretly search my hard drive for songs they can steal and publish as their own.
(And you still haven't answered my question as to how you think they got your song ...)

How can I find out what bugs have been fixed in iTunes v11.3?

Is this info available somewhere?

Hello Vince,
Thanks for posting in the Discussion Forums. With regards to LabVIEW and
multithreading, there are several things to consider. This link:
http://zone.ni.com/devzone/conceptd.nsf/webmain/d2e196c7416f373a862568690074c759
will provide you with a good background into multithreading and LabVIEW.
LabVIEW uses a user-level thread package, which means that LabVIEW is
controlling the multithreading so the Operating System does not. You can
configure/manipulate some of the threading issue in LabVIEW through this VI: [LabVIEW]\vi.lib\Utility\sysinfo.llb\threadconfig.vi.
You can also gain a litle of information about your VI priority and execution
system of your VI by using a VI property node. You can also see
significant performance gains by using the LabVIEW execution profiler
(Tools->Advanced->Profile VI) to learn about where your program is
spending time/memory.
Another couple links of interest:
Programmatically changing process priority:
http://digital.ni.com/public.nsf/websearch/154489314A440D6486256BDD00607A2A?OpenDocument
LabVIEW Real-time execution trace toolkit:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/13746
Hope this has been of some help today. Please let us know if we can help
out any further!
Regards,
Travis M
Applications Engineer
National Instruments
Travis M
LabVIEW R&D
National Instruments

HT202213 how can i remove multiple copies of the same songs in Itunes? When transferring from a drive to an other I got my library copied 3 times creating more than 12 000 songs!!!

See below

Generally setting a common Album title and Album Artist will fix things.
For compilations that aren't, select all tracks, Get Info, and on the option tab set Part of a Compilation to No. If it already says No tick the box alongside, then click OK.
For deeper problems see Grouping tracks into albums.
tt2

How can you edit a song in iTunes so that you can separate the part I want?

Some songs have LONG intros I'd like to edit out. For example, Elton John's Funeral for a friend/Love Lies Bleeding is only available as one track.
How can I edit out the FFAF part? (at least for the version I sync to my ipod.

Hey there,
One option is to change the songs starting time in iTunes. To change when a song starts and ends locate and highlight the song in iTunes. From there, right->click the song and choose "Get Info" from the Menu. When the window pops up, head over to the Options tab and in the middle of the window there are options to adjust the starting and ending times for that song or songs. When you are satisfied, go ahead and hit OK to apply the changes.
From there, sync the updates to your iPod.
Hope this helped.
B-rock

My Library has ten more songs than my iPod. How can I find out which songs are not syncing?

My Library has ten more songs than my iPod. How can I find out which songs are not syncing?
I recently had to purchase a new hard drive. Because the size of my music collection exceeds 140 GB, I stored all of my music on a separate external hard drive. When I exported everything back into my new iTunes library, I found that I had about 200 more songs than I had in the previous library. After deleting most of those extraneous songs, I was able to get my library close to where it was before. However, after syncing to my iPod Classic, I noticed that only 34,853 of the 34,863 loaded. How can I figure out which of those ten songs in my library did not sync to my iPod?
Yellow12

It may be that the 10 songs are unchecked. To find them select songs view.
If there is a column Heading marked with a tick then click on it to sort by this column.
If the Column is not there then View > View Options and select the Checked column which will then display
Check the songs by putting ticks in the empty boxes and resynch. Now those tracks should go over as well

How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?

After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?
How exactly are you doing this?
When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file. Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
You should see this prompt, when you are joining the regions:

How can we find out data in an editable ALV grid has been changed or not?

Hi Experts,
How can we find out whether a data in an editable ALV grid has been changed or not.
I am using the
FM -> REUSE_ALV_GRID_DISPLAY_LVC
for ALV display.
I have to chekc whther data has been changed or not befor saving. if changed then only i want to
SAVE
. I cannot use the internal table comparison method for this purpose also i am not using OOP ALV.
So kindly sugest me an alternative.
Thanks and Regards,
Shahana

Hi,
Thanks for your answer. I already saw this post.
See this method.
CALL METHOD reuse_alv_grid->check_changed_data
IMPORTING
e_valid = lv_check.
This will update the internal table with the edited values. Then we can go for internal table comparison.
But my scenario will not allow me for itab comparisons.I just want to know the ALV data has been changed or not.
Regards,
Shahana

How can I edit part of a clip

How can I edit part of a clip in iMovie.

First, select the portion of the clip that you would like to edit. Do this by dragging your mouse. A yellow border should be around this portion of the clip.
Next, right-click inside the yellow border and select SPLIT CLIP. Now you have a separate clip that you can apply your edit to.

My father-in-law passed recently, leaving behind an unopened copy of CS 5.5 Master Collection Student and Teacher Edition for Macs. How can I find out if he registered this software without opening it?

Hello forum,
Hopefully a simple question. My father-in-law passed recently, leaving behind an unopened copy of CS 5.5 Master Collection Student and Teacher Edition for Macs. How can I find out if he registered this software without opening it? After finding out how much this software runs, I'd like to sell or return it if possible to give the money to my mother-in-law for funeral costs.
Thank you,
Bichonfreeze

Mylenium,
Thanks for the quick response!
Thats a shame that it can't be used. Are you sure I couldn't donate the software to a university or school? It just seems like a big waste for something so expensive.
Bichonfreeze

How can i print out the waveform chart?

hello everybody,
how can i print out the "waveform chart". can i do it just push the button. ( example; stop button is stop the program etc..)
i checked the NI examples but i can't understand. i'm new to the Labview.
pls help me.
i added the my program
look forward your reply
regards from turkey...
Message Edited by hknmkt on 05-29-2008 04:15 AM
Attachments:
29.05.2008_11.vi ‏37 KB

hi jim,
i tried the program but it's not running. When i run the program, it's print out without run the program
i added the printed file.
look forward your reply
hakan
Attachments:
error8.JPG ‏8 KB

How can I edit out a part of my song in itunes?

Similar Messages

Maybe you are looking for