How can I edit several lines to cut or replace one word

I am trying to import a CD of an opera. When I put my CD in the reader, I get this (screen copy):
I wish to erase all the ocurrences of "Wagner: Parsifal - Act 1:" and keep the rest of the line (the part written in German). How can I do this in one procedure, without having to erase these words line by line.
If I want or replace them by other indexes (i.e. numbers) like in iWork's Numbers, how do I do in one procedure ?
Thanks for ytour help
Gérard

Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx ‏65 KB

Similar Messages

Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.

Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx ‏65 KB

How can I import several small audio files to create one BIG file in iTunes

I have ONE cd with THREE audio stories contained in EIGHTEEN audio files (6 files make each story). I also have an iMac. Not sure if they're mp3 or not, but they play on computers and car radios.
How can I take this CD, whisper abracadabra and end up with three files (each with one story)? Don't need to re-burn a CD, but just need to get them on to an iPod.
I've tried inserting the CD and using the right mouse click/info/options to select 6 files and identify them as a 'gapless album' - but this did not link the files together.
Any help you can offer would be appreciated. I have read pages & pages of topics, but could not find this particular issue.

Insert the CD.
Don't Import it yet.
Select the CD in iTunes.
Select the consecutive tracks uyou want joined as one file.
Go to menu Advanced > Join CD tracks.
Do this for each set of tracks you want as one file.
Then Import the CD.
If the tracks are already in iTunes, no need to import them again.
Use this -> Join Together
"Join Together automates the process of joining the files of selected iTunes tracks together with QuickTime and exporting them as a single AAC Music or Audiobook file/track. Optionally, you can then create a "chapterized" audio file of the exported AAC file with pointers to the individually joined tracks."

How can I edit a line of code that is found in this file "boot-11.1.1.6.0-1318.js"

From what I can understand, the file "boot-11.1.1.6.0-1318.js" is automatically generated for me in the ADF partitions. The file is located here "http://ctd/portal/afr/partition/ie/n/default/opt/boot-11.1.1.6.0-1318.js" on our portal. We found an error in one of the functions which renders our page incorrectly in IE9. We know what line of code we need to change, just not where to find where the function resides. I have an open ticket w/ Oracle support on this issue but to date, no help - the ticket is 5 months old & this issue is stopping our organization from upgrading to IE9.
Here's the function we need to change:
AdfIEAgent.prototype.getWindowClientHeight = function (a)
a = a.document;
//return (a.compatMode === "BackCompat" ? a.body : a.documentElement).clientHeight;
return a.documentElement.clientHeight;
*** Commenting out the "BAD" line & adding the line below it fixes the problem.
Any help is greatly appreciated.
Thanks,
Joe'l

You should escalate the SR if it's a showstopper for upgrading.
You can also not change the core JS from the ADF framework.
For you the solution works by doing this but that does not mean it should be a general fix.

How can I incorporate several video and audio clips into one iMovie project?

Hello all. Basically, I'm trying to solve a problem before it becomes one. I'm going to put together a short iMovie project for a thank-you dinner. Several people from out-of-town will not be able to make the dinner. I want to give them the opportunity to "speak" by having them put together a short video or audio clip. I then need to gather up all the clips and put them together in one iMovie project. I guess I'm looking for some assistance in terms of format, what types of files/formats to use, etc. I've done a few movies (mainly from still pictures -- glorified slideshows with music). But, I'm still a relative neophyte when it comes to the computer world. Any assistance would be greatly appreciated. (feel free to point to a "How to " tutorial if there's a good one out there).
Thanks.

your problem will not be the process of 'glueing stuff together'
follow advice given here
http://www.apple.com/support/imovie/
under 'Getting started' or follow the 'Video' tutorials ...
the real task is, to make all clips readable for usage in iM ...
before making you a technician on video-codecs:
download and install the free tools Mpeg Streamclip and Perian.org
you have to relaunch your Mac after doing so...-
BEFORE adding any of your external sources into an Event, use Streamclip to manually convert to DV, or if source is HDef, to Quicktime/Appleintermediate.
the resulting files should import flawless into iM, proceed as usual.
iM 'swallows' a lot of formats, so it could be this manual conversion isn't needed ...
don't hesitate to come back here, if probs occur ...

How can I make the line segment tool repeat several times?

How can I make the line segment tool repeat several times?

If this is what you want, hold the ~ key on your keyboard while dragging with the tool.
If you want spaced copies of the completed line, use the Transform Effects from the Effects menu.

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How can I edit a mp3 file and drop it in an iMovie project?

I wish to edit an mp3 music file so that I can drop a piece of it into an iMovie project. iMovie's audio tools are very rudimentary---one can reposition a music file, shorten it, etc but cannot pick a piece of it to complement a movie segment.
So I dropped the mp3 file into GarageBand. I deleted the first section of the song, then selected the 16 second piece I wanted to include in my iMovie, using the copy command. Then I pasted the piece into a new GarageBand project screen. The piece wouldn't play, and when I selected "export" the piece neatly went to where I wanted it, but again with no sound.
So simply: how do I edit an mp3 file (cutting a piece of it) and then save it so I can apply it to an iMovie? Help!
John

john Nall wrote:
The piece wouldn't play, and when I selected "export" the piece neatly went to where I wanted it, but again with no sound.
it should have played, but you can do it easier by exporting just the section you want:
http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)

In Address Book, how can i modify several contacts (several cards) at the s

Hello,
In Address Book, how can i modify several contacts (several cards) at the same time ?
for exemple : I have 100 contact which live in Paris, I select all of them together, but when I put "Paris" in the field "city", it puts "Paris" only in the fisrt contact !
how to edit several contact at a time ?
And I would like to put some kind of "tags", or words, in "remark", also by selecting several contact and edit them together...
Thanks by advance !
Alexandre.

Welcome to the discussions, Alexandre1975 et bonjour.
Just using Address Book this can't be done, but if you are prepared to try a little Applescript it is easy. This script will set the city for example - but only if there is already an address.
AK
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "Address Book"
set ContactList to the selection
repeat with ThisOne in ContactList
set city of first address of ThisOne to "Paris"
end repeat
end tell</pre>
(The recent upgrade to the discussions has disabled the link that allows direct opening of a script, so run Script Editor and copy in the script.)
Message was edited by: Austin Kinsella1

How can I select several emails from 3900 on my 5c and delete the rest easily

How can I select several emails from 3900 on my 5c and delete the rest easily

We'll I don't think there's a easy way to delete a lot of emails besides deleting all of them. To delete all of them click on inbox them edit then "mark all" then trash/delete. Other than that you will have to specifically deleted the ones you want to delete.

How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?

After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?
How exactly are you doing this?
When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file. Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
You should see this prompt, when you are joining the regions:

Geotagging - how can I edit new places that I have previously created but with typos, errors etc? How do I delete a place I have set up?

Geotagging - how can I edit new places that I have previously created but with typos, errors etc? How do I delete a place I have set up? Then I could create a new, correct entry. I'm using iPhoto '09.

Is it OK to reply to my own question?? Thanks to the related posts that appeared AFTER I'd made the post above, I learnt about the 'Manage my places' item under the Windows menu. I felt a bit dumb not knowing this.
BUT it doesn't completely resolve the issue. The info shown in the EXIF (using opt-cmd-I) under Places has the place name I choose, but it is followed by a few other lines that are incorrect and do not seem to be anything to do with any data I can see under 'Manage my places'.
Can anyone explain where these other entries might come from, and how to edit them?

How can i edit a picture like these?

How can i edit a picture like these? (i mean the text) Please write me a program or a tutorial. Thanks! http://wallpiph.com/wallpaper/2013-pain-gain-hd-wallpaper.html

Image like that can be achieved many different ways there is no right or wrong no one way to do things in Photoshop. There are also many third Add-Ons developed for Photoshop. Prices range from free to very expensive. Several third party add on have been developed to process images and help produce image like your example.

How can i move several emails into folders in ipad?

How can i move several emails into folders in ipad?

You can sort by using the search feature. When you are in your mail account you use the search bar at the top to find emails from a particular sender (there are Other options as well in search). Type in that sender's address. When the emails show up in the window on the left side, select all of the emails that you want to move. Tap Edit at the bottom and the Move Folder icon will appear. Tap that icon and select the folder that you want to move the emails into.
To move multiple emails without using the search to sort, go to your inbox and tap Edit. Then select all of the emails that you want to move. After you are done selecting them, tap the Move icon at the bottom on the left side of the account window. When you tap move, you get a choice of folder into which you can place the selected emails.

How can I email several pdf files in one email?

HOw can I email several pdf files in one email?

You have to use 3rd party apps like GoodReader.

How can I edit several lines to cut or replace one word

Similar Messages

Maybe you are looking for