How can I eliminate a green rectangle showing up after exporting?

After exporting in FCP and viewing in Quicktime, a green rectangle on the right side of the Quicktime window is showing up for about 1 second at a point where there is black between two clips with fade in/out transitions. There is a slug there which I thought might have something to do with it. I tried deleting the slug but the green rectangle persists. Can anybody help me eliminate this green monster?

Nick-- Thanks so much for your reply.
CODEC is H.264.
In Sequence Settings I have the Quicktime Video Settings Compressor set to HDV 1080i60.
After rendering and saving the sequence, I click
File >
Export >
Using Quicktime Conversion. After window opens to save the file
Format: Quicktime Movie
Use: Most Recent Settings
I click "Options" >
Settings, I choose H.264, then click OK (the green rectangle appears regardless of quality setting (I tried 2 kinds: Best and Hight), (also, encoding doesn't matter, either. I tried Multi-pass and Single-Pass)
Click Size, choose NTSC 720 x 480 16:9 (using this just for a smaller file to FTP to show progress)
I then uncheck Sound and Prepare for Internet Streaming (no soundtrack on this yet), then click OK
I then click Save.
As I mentioned I tried it several different ways and each time the green rectangle shows up. I am nearing the end of this project and this is really becoming a problem. I hope you can help eliminate it. If you would like to see it I can email a small few second clip that will show it.
Thank you again--

Similar Messages

How can I eliminate automatic "quotation marks" that are appearing at the end of each line?

I keep getting "quotation marks" at the end of every line when I type. How can I eliminate these marks as they are even showing up when I print and I will not have on my wedding programs! Please help (from a desperate bride-to-be)!

It sounds like you are using an East Asian font and unless you are issuing invitations in Chinese, Japanese, or Korean that doesn't sound like a good idea.
Peter

How can I eliminate stairsteps between samples in a graph?

How can I eliminate stairsteps between samples in a graph? I am graphing the input from a fieldpoint AI-100 and I get stairsteps between samples. I'm using Labview 4.1

Paul,
It sounds like you are running into the situation where the resolution of the ADC converter is the source of the behavior you see. Your configuration may be set so that a voltage change is not seen between samples, generating multiple points with the same value. If this is the case, the graph you see is correct. It is displaying the points it receives from the FP-AI-100. You can verify this by displaying the graph data in an array, and seeing if some of the adjacent samples show the same value.
If this is the case, see if you can match the signal range to that of the ADC to take advantage of the resolution available. For example, if you set the range to be 0 to 30 volts, the smallest detectable voltage change would be 7.3 mV (range/gain*2^resolution) bec
ause the FP-AI-100 has a resolution of 12-bit. You can read up on issues with range and resolution by doing a search on http://www.ni.com using the keywords "range" and "resolution".
Otherwise you may be able to compensate for this behavior in software, such as running an averaging routine or applying a mathematical formula to the data points.
Hope this helps!
Wilbur Shen
Applications Engineer, Web Support
National Instruments

How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?

How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?

It depends, but it could either be the Grid or Pixel Grid under View>Show.

How can i hide incoming calls from showing on my screen

How can I stop incoming calls from showing on my home screen?

If you just don't want to see the call notification on your home screen go to Settings, Notification, Phone and turn Notification Center to Off. Or you can simply select None and calls will be listed in the Notification center but you won't see a banner / alert on the home screen.
This also eliminates the Caller ID from being displayed before you answer the call.

How can I eliminate grid lines of selected cells when printing, in iOS numbers

How can I eliminate grid lines of selected cells when printing, using iOS numbers

Hi Cmlgfx,
Thanks for visiting Apple Support Communities.
You can style a table to remove grid lines and only show an "outline" around the table itself.
See this article for help with table styles:
Numbers for iOS (iPad): Place and style tables
http://support.apple.com/kb/PH3365
To show or hide the table name, table border, and grid lines, alternate row colors, or adjust fonts, tap Table Options at the bottom of the Table window (you may need to scroll up in the window to see it), and then set your preferences using the options in the Table Options window. (When you’re done, tap at the top of the window to see other options.)
All the best,
Jeremy

How can I eliminate delays in one NIC when there is traffic on second NIC

Using LabVIEW TCP/IP VIs, my LV application is accessing a database though a LAN, and through a second NIC, it is controlling an instrument. The instrument is connected directly to the computer NIC with a cross-over cable. I have made a permanent route for the IP address of the instrument in the IP route table. The LAN and the instrument have different subnet numbers. Using a packet sniffer, I don't see any traffic meant for the LAN going to the NIC connected to the instrument. The OS of the computer is Windows XP and the NICs are PCI cards.
The message traffic to the instrument suffers from intermittent delays when there is traffic going to the LAN.
How can I eliminate the delays? What could be the cause of the delays? Thanks in advance for your recommendations and suggestions.

Hi LabBard,
Could you tell us a little more about the device that you are connected to? What you could try is to have a VI accessing the LAN, and a separate VI communicating with the instrument, and see how things play out.
Let us know how it goes!
Rasheel

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try syncing the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it.

How can i get music to not show up on my phone that i dont want there

how can i get music to not show up on my phone that i dont want there

If the app is G-Toolkit and you have a Gmail app on your iPhone, delete the Gmail app. Apparently the G-Tool kit is tied to a Gmail app. From searching the web my impression is that G-Toolkit is not spyware and is from a legitimate company that produces app for several platforms.

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well?

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well? I have also tried may suggestions on the apple support site and none have worked. Any suggestions are welcome.

You need iTunes version 11+.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

How can I make my BCC recipients show up in MY sent emails?

When I send an email to BCC recipients, how can I make those BCC recipients show up in MY sent emails...so I'll remember who I sent the email to?

Welcome to the discussions, MacPat292.
View/Message/Long Headers or if you are going to do it regularly View/Customize Toolbar and add the button for it to your toolbar.
AK

In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

Hello, all.
In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

Click the search magnifying glass and uncheck "Search entire library".
Type in the name of the track.
Click the album of interest to show tracks.
Select the track.
Press the X in the search box to clear the search.
Double click the track you want to start playing first.
tt2

How can I use more lines to show a field of a row in a report?

How can I use more lines to show a field of a row in a report? Table A have two columns: (c1 number(5),c2 varchar2(1000)).When I show the table on a report,the column c2 show itself in one row.So the width of html page is very wide.How can I split the field c2 to many lines?
Thanks for any help.

I was wondering if an answer was found for this one.
I have the same problem using the default "Look 4" template for the region. I have found in the CSS file where it is defined and it specifies "nowrap" in the style, which is why the long value is not being split over multiple lines.
So, my question is, without modifying or creating templates, is there a way to override the "nowrap" attribute from within the item definition? e.g. in the Column Attributes.Column Formatting.CSS Style field. I had some success changing the display properties, such as background colour and font size but I can't seen to override the nowrap attribute!

How can I get my POP account showing in the inbox it's supposed to show in?

Hi-Until a couple of weeks ago all mail received from my IMAP and POP accounts would show up in the correct mailboxes in my Mail inbox list. (Only problem then was that sent mail would never show up in the sent mail folder--always stayed in the inbox.)
Now a new problem has happened----unless I go directly to my charter cable account (P0P account) to retrieve any mail sent to that particular address, the mail goes unnoticed by Mail on my MAC and nothing shows up in the inbox. But--- If I do a test to myself , sending an email to the POP address from my IMAP account from my MAcMAil, my IMAP account will show the email in the inbox of the IMAP account I sent it from as if I'd mailed it to that account. How can I get my POP account showing in the Inbox? And, any suggestions for a fix to getting the "sent" mail to show in the "sent" folder would also be appreciated.
Thanks!

Control click in the tool bar area and customize.

HT3529 How can you get your picture to show up in iMessage?

How can you get your picture to show up in iMessage?

What do you mean by picture?
Picture in a message or like a contact picture?

How can I eliminate a green rectangle showing up after exporting?

Similar Messages

Maybe you are looking for