How can I eliminate email on multiple devices?

I have four different email accounts. I have three devices, a Macbook Pro, an iPhone and an iPad. How can I coordinate the devices so that all email goes to my computer, but only messages that have not downloaded to the computer go to the other devices? I end up deleting the same emails from multiple locations, which just takes too much time.
Thanks

My mail account on my iPhone is configured as a POP account. Messages are set to never remove from server.
This same mail account is configured as POP account on my iPad. Messages are set to never remove from server.
This account on my MBP is set as POP, and again, remove from server is disabled.
Every email appears in every location. As an example, I had not turned on my iPad for two days, until I checked the settings of the email account. It immediately downloaded 99 messages. I have seen these messages on both my computer and iPhone already, and have deleted them from iPhone. I would have preferred that they never appeared on the iPad.
Is this possible?

Similar Messages

For an iCloud and/or Windstream email account, how can I delete emails across multiple devices, without having to go to each device?

I have a friend with an iCloud email account and Windstream account on both her iPad and iPhone... She's saying that when she deletes an email from one device, it doesn't delete it from the other automatically... She's using both emails through the "Mail, Contacts and Calendars" settings under the "Settings" menu; not through apps... I've had her check both of her email account settings to make sure that the settings were consistent... I've never had this issue with Exchange or Gmail, and I don't use the iCloud email account, so I'm a little unfamiliar with what else to look at... Can someone offer some advice, please?
Thank you for your help!

IMAP is the mail protocol that allows you to delete a message one place and have it delete everywhere else. iCloud uses IMAP, so it should be working. If the messages never delete, then something may be incorrect in the settings. The easiest thing to do with iCloud is to logout of the account on every device, and then login again. (Another common problem with iCloud email is people often have two Apple IDs, and thus may have two iCloud email accounts. If you get confused about which one you're using, you may think you've deleted email when you actually haven't.)
If the iCloud messages do ultimately delete across all devices, then it could be that some devices aren't set to "Push" but are instead set to "Fetch" the newest info from the server. Fetch can be set to as long as an hour between check-ins.
The same holds true for Windstream if she's using an IMAP account there, too. If it's a POP account, then deleting a message one place will never delete it anywhere else—that's the way POP works.

HT1495 how can i sync aps on multiple devices on one computer

Trying to use multiple devices on same computer but don't want the devices to have all the same aps. how can i seperate that without having to check the aps i want each time a sync?

Assuming the photos are in an iPhoto Library on the Air and you want to import them into your iPhoto Library on your Powermac there is an application that can copy all photos in the Air library that are not in your Powermac library into your Powermac library. However, no keywords or other metadeata willl be brought over with them and they will come over in a new event each time you run it. Take a look at: Sync iPhoto libraries | SyncPhotos (formerly iPhotoSync) | Haystack Software.
There's another application, iPhoto Library Manager, that will let you copy events or albums from the Air library to the Powermac library. However, you will have to select the events/albums you want to copy. It's not automatic. This method will copy keywords and other metadata along with the photos.
OT

How to set up email for multiple devices

What is the best way to synch e-mail on my wife's iPad with her Mac Book? I thought iCloud allowed her comcast inbox to update on all devices. Thank you.

As I understand from a quick search, the ComCast email is POP3, that is not multidevice email. And just because your wife also has an iCloud account does not mean that the email from ComCast on an iOS device is going to jump over to the iCloud account in the same iOS Mail app.
You should go to the ComCast email website and configure your wife's CC email account to forward her email to her iCloud account. Then configure her Macs and iOS devices with just the iCloud account. She will then have iCloud email synced across all of her devices.
I know this works, I forward two IMAP Gmail and one POP3 Hotmail accounts to my iCloud email account. It works perfectly with email forwarded from any of these accounts, across both of my Macs and both of my iOS devices.
Hopefully her Mac has Mac OS X Lion or she cannot have iCloud. But she can still get the iCloud email in another Mac OS X version and I can help you set that up if necessary.

How do I sync emails on multiple devices so that they show as read when opened on different devices?

I can't get my mail on my phone to show as having been replied on after I've checked and replied on a different device like my laptop. Can anyone help?

What type of email account do you have? What you describe is the normal operating mode for an IMAP email account. If you have a POP email account, that is very difficult to achieve. (I don't know of any way.)

TS1702 How can I eliminate duplicates in my devices when I sync?

I do not know if it is related to icloud but when I sync now I get duplicates in the calendar on my different devices. Ipod, IPAd1 and IPad 2.
I also would like my dedvice to sync my contacts and calendar from Outlook on my PC as prime feeder, it does not work too well...
Thanks for your help!
Sue

If you are trying to sync from the Outlook calendar on the PC and you are syncing with iCloud - that is probably why you are getting duplicate entries.
So therefore, if you are getting duplicate entries - it must be syncing the Outlook calendar on the PC.

How can i copy email from a folder within mail to an external device?

How can i copy email from a folder within mail to an external device?

In snow lepard you:
1) Click the folder you want to export (e.g. Work mail)
2) Go to "Mailbox" then click "Archive Mailbox"
3) Then choose the pace you want to Archive it to
Then it will create a file that looks like this:
Then that is that mailbox.
I belive its the same with lion

How I can test an application on multiple devices?

How I can test an application on multiple devices?
Any information about it?
Once I have created the .ipa file that I have to do?

In creating the IPA you would have used a provisioning profile. If that is a development one, or a distribution ad hoc one, you will have chosen what devices the IPA is allowed to work on.
So, make a distribution ad hoc profile that includes all of the devices on your iPhone developer account, and make the IPA using that profile. Now when you have made the IPA you can give it to the people who own those devices.
If they are all your own devices (or people who you see each day) you could connect each one to your Mac, and use Xcode's Organizer or Devices window (depending on which version of Xcode you use) and drag the IPA into the Applications list for the device.
If the devices are owned by other people you don't get to see, you can either send the IPA to them and they would use iTunes to get it onto their device, or if you can post the IPA online you can send a link to them, and they can install the IPA directly from the web page.
The web server will have to be HTTPS, you can't use HTTP services since iOS 7.1 came out. To post the IPA online you can use this utility:
Mac App Store - BetaBuilder for iOS Apps

How can I eliminate delays in one NIC when there is traffic on second NIC

Using LabVIEW TCP/IP VIs, my LV application is accessing a database though a LAN, and through a second NIC, it is controlling an instrument. The instrument is connected directly to the computer NIC with a cross-over cable. I have made a permanent route for the IP address of the instrument in the IP route table. The LAN and the instrument have different subnet numbers. Using a packet sniffer, I don't see any traffic meant for the LAN going to the NIC connected to the instrument. The OS of the computer is Windows XP and the NICs are PCI cards.
The message traffic to the instrument suffers from intermittent delays when there is traffic going to the LAN.
How can I eliminate the delays? What could be the cause of the delays? Thanks in advance for your recommendations and suggestions.

Hi LabBard,
Could you tell us a little more about the device that you are connected to? What you could try is to have a VI accessing the LAN, and a separate VI communicating with the instrument, and see how things play out.
Let us know how it goes!
Rasheel

How can i cfp and nuke the device ??

how can i cfp and nuke the device ??
my Z10 stl100-1 have a bb10-0015 error and i can't use link to reload it And more than one way can't fix this error
autoloader can't connect to the device just ask me for my password
some one tell my the way to fix it  cfp and nuke the device
whats that mean
plzz help me

You already have multiple threads running on this issue, and duplicating with a new thread doesn't help, please refer to your previous threads.
http://supportforums.blackberry.com/t5/BlackBerry-Z10/can-t-reload-aftar-i-have-BB10-0015-error/m-p/...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

How can I eliminate my count

I had an iPhone5S and an iPod5, someone stoled them so I wanna know how can I eliminate mi count, and if I could lock this gadgets

Change your password at http://iforgot.apple.com. You can remote lock your devices if you enabled Find my iPhone on those devices. If so, go to http://icloud.com/find to take action.

How can I eliminate SPAM !!

I am getting inundated with SPAM/advertising messages. How can I eliminate this!

Is this spam email? If it is, Firefox has no email options. If you are accessing email through Firefox it will be a webmail service. If that is the case you can check with the support for the webmail service to see if they offer a spam filter.
If it is pop-ups, see http://kb.mozillazine.org/Popups_not_blocked

How can I eliminate stairsteps between samples in a graph?

How can I eliminate stairsteps between samples in a graph? I am graphing the input from a fieldpoint AI-100 and I get stairsteps between samples. I'm using Labview 4.1

Paul,
It sounds like you are running into the situation where the resolution of the ADC converter is the source of the behavior you see. Your configuration may be set so that a voltage change is not seen between samples, generating multiple points with the same value. If this is the case, the graph you see is correct. It is displaying the points it receives from the FP-AI-100. You can verify this by displaying the graph data in an array, and seeing if some of the adjacent samples show the same value.
If this is the case, see if you can match the signal range to that of the ADC to take advantage of the resolution available. For example, if you set the range to be 0 to 30 volts, the smallest detectable voltage change would be 7.3 mV (range/gain*2^resolution) bec
ause the FP-AI-100 has a resolution of 12-bit. You can read up on issues with range and resolution by doing a search on http://www.ni.com using the keywords "range" and "resolution".
Otherwise you may be able to compensate for this behavior in software, such as running an averaging routine or applying a mathematical formula to the data points.
Hope this helps!
Wilbur Shen
Applications Engineer, Web Support
National Instruments

How can I download eBooks to multiple iPads using same apple ID?

How can I download eBooks to multiple iPads using the same apple ID?

Those are called iBooks. On the devices go to iTunes app and then to the Purchased section in bottom row and find the media and tap install

How can i send email to team when opportunity is assigned

Hi,
I need to send email to opporunity team when team is assigned.
Here is what I did.
created new workflow on oporuntity team record type. when new record saved.
problem is in Action send email option
'TO' field have only 2 options
specific user
specific email
I cannot user specific user as I have to select the specific user from the list.
I think I have to user specific email, but when I see the columns avaiable I have first name, last name and team role.
How can I get email address when I choose lastname.
Whcih function to user and how.
I saw Joinfieldvalue fuinciton , anyone has dea how can I add this.
THanks
Pallavi

You must still be on R15. Once you get upgraded to R16 you will have additional options in the automated email task. The drop down list will include 'Relative User on Record'. Once you choose it you will be given the option to send the email to the various opty team members. You'll have to create multiple tasks as each will send only one email.
Best of luck.
Edited by: Colin Frissell on Jun 8, 2009 2:02 PM

How can I eliminate email on multiple devices?

Similar Messages

Maybe you are looking for