How can I eliminate "sending text" sound?

I really don't need or want a notification that a text has been sent.  Texts should be a "fire and forget" kind if thing.

have you tried to go into settings->notifications->Messages->Text Tone
scroll up and choose none ?

Similar Messages

  • How can I eliminate the annoying sound effect at startup on my iMac?

    How can I eliminate that annoying sound effect during the startup on my iMac?

    Sorry about high-jacking your thread! Just occasionally some of us lapse into humour to keep sane.
    Please post back if you don't feel you have had a proper reply to your question.

  • Im using Duet2 Interface with Garageband 09 when I connect my acoustic guitar to the combi jack I get a buzzing/humming sound how can I eliminate this?

    I'm using Duet 2 Audio Interface with Garageband 09, when I connect my acoustic guitar to the combi jack I get a buzzing/humming sound.  How can I eliminate this?

    do you have any thing plugged into wall power? Audio interface, computer, speakers, amp for the guitar? if so are they all plugged into the same power strip? if so, have you tried another outlet?
    Altertively have you tried a diffrent port on the combo jack? Have you tried a diffrent guitar cable? Have you tried a diffrent guitar or audio input device like a mic? Is the device directly plugged into the combo jack, or is it being routed throughs some thing?

  • How can you turn off the sounds for receiving a text or e-mail while on a phone call???

    How can you turn off the sounds for receiving a text or e-mail while on a phone call???

    That's the most stupid thing. It may work but the phone shouldn't be going off in your ear while in use from the start.
    Message was edited by: Ford Truck

  • How can i set predictive text to a foreign language

    I'm new to apple and iPhones. I've got everything setup in English but I frequently want to send text and/or email messages in French. When I do this predictive text jumps in and changes things to what it thinks I want in English. e.g. if I type tous it predicts I want toys and inserts it accordingly. How can I set predictive text to a foreign language.
    (p.s. my wife's iPad works fine as it has a button to press for alternative language but I don't see anything similar for iPhone)

    Add the French keyboard.
    Settings > General > Keyboard > Keyboards > Add > French

  • How can I eliminate automatic "quotation marks" that are appearing at the end of each line?

    I keep getting "quotation marks" at the end of every line when I type. How can I eliminate these marks as they are even showing up when I print and I will not have on my wedding programs! Please help (from a desperate bride-to-be)!

    It sounds like you are using an East Asian font and unless you are issuing invitations in Chinese, Japanese, or Korean that doesn't sound like a good idea.
    Peter

  • How can I modify the text of the automatically created emails of WAS 6.40.

    Hi community,
    I have a question. How can I change the text of then email which ist automatically send by the EP6/WAS6.40 when I create a new user. The email displays the message "Dear Sir or Madam, your user xzy was created with the following password xxx."
    How can I modify this text. Where is it located in the Enterprise Portal / WEBAS 6.40 .
    Thank you.
    Best Regards,
    Olaf Reiss

    Not easily or readily available as of now. It WILL be part of the new features in the NetWeaver 04 release. (*This same question was asked in my EP6 certification class one week ago and this is the answer I got.)
    Found this guide in another post...it should help doing what you need manually...
    http://help.sap.com/saphelp_nw04/helpdata/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm
    Hope this helps!
    CS

  • How can I eliminate stairsteps between samples in a graph?

    How can I eliminate stairsteps between samples in a graph? I am graphing the input from a fieldpoint AI-100 and I get stairsteps between samples. I'm using Labview 4.1

    Paul,
    It sounds like you are running into the situation where the resolution of the ADC converter is the source of the behavior you see. Your configuration may be set so that a voltage change is not seen between samples, generating multiple points with the same value. If this is the case, the graph you see is correct. It is displaying the points it receives from the FP-AI-100. You can verify this by displaying the graph data in an array, and seeing if some of the adjacent samples show the same value.
    If this is the case, see if you can match the signal range to that of the ADC to take advantage of the resolution available. For example, if you set the range to be 0 to 30 volts, the smallest detectable voltage change would be 7.3 mV (range/gain*2^resolution) bec
    ause the FP-AI-100 has a resolution of 12-bit. You can read up on issues with range and resolution by doing a search on http://www.ni.com using the keywords "range" and "resolution".
    Otherwise you may be able to compensate for this behavior in software, such as running an averaging routine or applying a mathematical formula to the data points.
    Hope this helps!
    Wilbur Shen
    Applications Engineer, Web Support
    National Instruments

  • How can i recover deleted text messages?

    How can I recover deleted text messagres?

    Generally, you can't but... try sending a text to the person and see if some of their conversation(s) returns.  I've seen this happen a few times.

  • How can I eliminate the time zone in the printed version of ical.

    How can I eliminate the time zone in the printed version of ical.

    http://www.apple.com/feedback/macosx.html
    Send feedback to apple about changing this back.
    There is no native way to do this.

  • How can I change the text in F1 Help?

    I made a General Text  in T-code SE61, the name is 'ZTEST'.
    And at the SE80, in the local program,
    I used functions like these:
    HELP_OBJECT_SHOW
    HELP_OBJECT_SHOW_FOR_FIELD
    DSYS_SHOW_FOR_F1HELP
    These functions can display F1 HELP.
    But I want to send a text using functions,
    and display F1 HELP.
    Example)
    'Hello! This is your program.'
    Sending this to F1 HELP by functions, and display.
    If you know, please help me.
    Thank you.
    Edited by: Jaime White 999 on Apr 19, 2011 9:20 AM

    My source is like this:
    REPORT  z_test008.
    DATA: lt_links TYPE TABLE OF tline.
    SELECTION-SCREEN: PUSHBUTTON 2(6) s_button USER-COMMAND click.
    INITIALIZATION.
      s_button = 'uB3C4uC6C0uB9D0'.
    AT SELECTION-SCREEN.
      CASE sy-ucomm.
        WHEN 'CLICK'.
          CALL FUNCTION 'HELP_OBJECT_SHOW'
            EXPORTING
              dokclass                            = 'TX'
              doklangu                            = sy-langu
              dokname                             = 'Z_TEST'
              doktitle                            = 'Description'
    *          CALLED_BY_PROGRAM                   = ' '
    *          CALLED_BY_DYNP                      = ' '
    *          CALLED_FOR_TAB                      = ' '
    *          CALLED_FOR_FIELD                    = ' '
    *          CALLED_FOR_TAB_FLD_BTCH_INPUT       = ' '
    *          msg_var_1                           = ' '
    *          MSG_VAR_2                           = ' '
    *          MSG_VAR_3                           = ' '
    *          MSG_VAR_4                           = ' '
    *          CALLED_BY_CUAPROG                   = ' '
    *          CALLED_BY_CUASTAT                   =
    *          SHORT_TEXT                          = 'X'
    *          CLASSIC_SAPSCRIPT                   = ' '
            TABLES
              links                               = lt_links
           EXCEPTIONS
             object_not_found                    = 1
             sapscript_error                     = 2
             OTHERS                              = 3.
          IF sy-subrc NE 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
      ENDCASE.
    I just want to know that how can I change the text in F1 HELP, do not use SE61.
    In the source, I want to send the text by functions, and display that.
    Thank you.

  • ICal was linked to a Google account I canceled.  When I open iCal, a message says iCal can't connect to the account server.  Clicking OK repeats the message.  Clicking OK, iCal quits. How can I eliminate the problem server?

    iCal was linked to a gmail account I canceled.  When I open iCal, a message says iCal can't connect to the gmail account server.  Clicking OK repeats the message.  Clicking OK again causes iCal to quit. There is no opportunity to delete the link.  How can I eliminate the problem server or otherwise get iCal working again?  (OS 10.6.8)

    The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
    If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
    sudo sed -i~ '10,$d' /etc/hosts
    You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

  • How can I eliminate delays in one NIC when there is traffic on second NIC

    Using LabVIEW TCP/IP VIs, my LV application is  accessing a database though a LAN, and  through a second NIC, it is controlling an instrument.  The instrument is connected directly to the computer NIC with a cross-over cable.  I have made a permanent route for the IP address of the instrument in the IP route table.  The LAN and the instrument have different subnet numbers.  Using a packet sniffer, I don't see any traffic meant for the LAN going to the NIC connected to the instrument.  The OS of the computer is Windows XP and the NICs are PCI cards.
    The message traffic to the instrument suffers from intermittent delays when there is traffic going to the LAN. 
    How can I eliminate the delays?  What could be the cause of the delays?  Thanks in advance for your recommendations and suggestions.

    Hi LabBard,
    Could you tell us a little more about the device that you are connected to? What you could try is to have a VI accessing the LAN, and a separate VI communicating with the instrument, and see how things play out.
    Let us know how it goes!
    Rasheel

  • How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word.

    How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear.  You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location.  THANK YOU!!!!!!

    Have you tried Word for Mac?
    You will need to test if links survive export or printing to .pdf
    Peter

  • HT1848 when i purchase ringtones and they download directly to the music app on iphone, how can I move them to SOUNDS in SETTINGS so I can assign to various functions please?

    when i purchase ringtones and they download directly to the music app on iphone, how can I move them to SOUNDS in SETTINGS so I can assign to various functions please?

    You would have to create the ringtones.
    Google will find several way to do this.
    You cannot buy ready made ringtones from your computer.

Maybe you are looking for

  • Remote access VPN with Cisco Router - Can not get the Internal Lan .

    Dear Sir , I am doing Remote Access VPN through Cisco Router. Before the real deployment, I want to simulate it with GNS3.Need you help to complete the job .Please see the attachment for Scenario, Configuration and Ping status. I am getting IP addres

  • Blank page seen in the print preview ?

    Hi all I have deveoped a smartform and created a second page with main window......but the problem is , iam getting a blank page output when i see it in the print preview . suppose if data is only in two pages iam , i can see the third page with no d

  • EXIT for transaction CJ20N

    Hello everyone, I'm having trouble adding code to the transaction CJ20N by user-exit or badi. What i want do is, when editing and trying to add a new material, i want to check first if field RESBD-LGORT is filled. If not, send error message that fiel

  • Audit in SharePoint Record Center

    Hi All, As per the process Audit Guys have to perform audit every 3 month in order to make sure that all the records are safe. I am wondering how Audit Guys can make sure that all the records are there in record center and all are safe. Record Center

  • Encoder Frequency to RPM

    Hey people, Im working on a project that involves testing a dc motor. One of the functions in this program is to calculate the speed at which the motor is rotating. I know how to convert from counter frequency to rpm, but my issue lies with the frequ