How can i eliminate window minimize to dock animation

How can I:
1. eliminate all animations when window minimizes or maximizes from the dock (create blink in, blink out)
2. speed up animation of window to/from dock to instantaneous

open System Preferences -> Dock. Change 'Minimize windows using' from Genie effect to Scale effect,
That doesn't eliminate the animation. It only changes the type or effect.
untick 'Animate opening applications'.
That just stops the icon bouncing in the Dock when an application is launching. Again, it has no effect on the window animation.
Regards.

Similar Messages

  • How can I eliminate delays in one NIC when there is traffic on second NIC

    Using LabVIEW TCP/IP VIs, my LV application is  accessing a database though a LAN, and  through a second NIC, it is controlling an instrument.  The instrument is connected directly to the computer NIC with a cross-over cable.  I have made a permanent route for the IP address of the instrument in the IP route table.  The LAN and the instrument have different subnet numbers.  Using a packet sniffer, I don't see any traffic meant for the LAN going to the NIC connected to the instrument.  The OS of the computer is Windows XP and the NICs are PCI cards.
    The message traffic to the instrument suffers from intermittent delays when there is traffic going to the LAN. 
    How can I eliminate the delays?  What could be the cause of the delays?  Thanks in advance for your recommendations and suggestions.

    Hi LabBard,
    Could you tell us a little more about the device that you are connected to? What you could try is to have a VI accessing the LAN, and a separate VI communicating with the instrument, and see how things play out.
    Let us know how it goes!
    Rasheel

  • How can I eliminate the bottom strip of icons from my ios7 4s iphone?

    How can I eliminate the bottom strip of icons from my ios7 4s iphone so I can the whole picture I've used as a wallpaper?

    You cannot remove the Dock. You can move the app icons off the dock, move others onto the dock and keep the dock empty but you cannot remove the dock.

  • Hi Foks: How can I eliminate in Safari the short cut control 1...4 ? so that I can write these candidates in the NY Times Sudoku ? Thanks, Federico Penzo

    Hi Foks: How can I eliminate in Safari the short cut control 1...4 ? so that I can write these candidates in the NY Times Sudoku ? Thanks, Federico Penzo

    Do a custom install and install each version in its own program folder to use multiple Firefox versions.
    * https://support.mozilla.com/kb/Custom+installation+of+Firefox+on+Windows
    * https://support.mozilla.com/kb/Installing+a+previous+version+of+Firefox
    Create a new profile exclusively for each Firefox version.<br />
    Create a desktop shortcut with -P "profile" appended to the target to launch each Firefox version with its own profile.
    See these mozillaZine KB articles for information:
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    * http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
    * http://kb.mozillazine.org/Testing_pre-release_versions
    <br />
    ''(in reply of a PM)''

  • ICal was linked to a Google account I canceled.  When I open iCal, a message says iCal can't connect to the account server.  Clicking OK repeats the message.  Clicking OK, iCal quits. How can I eliminate the problem server?

    iCal was linked to a gmail account I canceled.  When I open iCal, a message says iCal can't connect to the gmail account server.  Clicking OK repeats the message.  Clicking OK again causes iCal to quit. There is no opportunity to delete the link.  How can I eliminate the problem server or otherwise get iCal working again?  (OS 10.6.8)

    The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
    If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
    sudo sed -i~ '10,$d' /etc/hosts
    You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

  • How can I eliminate grid lines of selected cells when printing, in iOS numbers

    How can I eliminate grid lines of selected cells when printing, using iOS numbers

    Hi Cmlgfx,
    Thanks for visiting Apple Support Communities.
    You can style a table to remove grid lines and only show an "outline" around the table itself.
    See this article for help with table styles:
    Numbers for iOS (iPad): Place and style tables
    http://support.apple.com/kb/PH3365
    To show or hide the table name, table border, and grid lines, alternate row colors, or adjust fonts, tap Table Options at the bottom of the Table window (you may need to scroll up in the window to see it), and then set your preferences using the options in the Table Options window. (When you’re done, tap at the top of the window to see other options.)
    All the best,
    Jeremy

  • How can I install Windows 8.1 Enterprise on my Macbook Pro  With BootCamp?

    How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

    Hi Armin.S,
    I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
    Boot Camp: System requirements for Microsoft Windows operating systems
    http://support.apple.com/kb/HT5634
    Mac Basics: Using Windows on your Mac with Boot Camp
    http://support.apple.com/kb/HT1461
    Apple - Boot Camp Support
    https://www.apple.com/support/bootcamp/
    Regards,
    - Brenden

  • How can i install windows games in my macbook pro

    I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

    As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
    As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

  • How can I use windows software on the IMac

    How can I use windows software on my iMac? I know I can partition the hard drive but do I need to buy Windows OS?

    You can use Boot Camp, which comes with your Mac and install a copy of Windows on a new partition, or you can use a virtual application like Parallels. 

  • How can i install windows game on my mac actually i download a cricket game 2009 how i can inastall in mac

    how can i install windows game on my mac. actually i download a cricket game 2009 how i can inastal in mac

    It will never run in OS X. You need to install Windows on your machine.

  • My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port.  How can I get windows to detect this device?

    My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port.  How can I get windows to detect this device?  A message from windows says: the device has malfunctioned.

    Try TS1363: iPod: Appears in Windows but not in iTunes.
    See also Corrupt iPod classic.
    tt2

  • How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

    How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
    I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
    I can't install using DVD R/W because it's not working.
    Please help me.
    Thank you.

    unlocked by myself
    thanks

  • On the mac mini 2011 how can I run windows 7 without the optical drive, On the mac mini 2011 how can I run windows 7 without the optical drive

    On the mac mini 2011 how can I run windows 7pm bootcamp without an optical drive.  I watch lots of football on sop cast and other such windows based programmes but can't work out how to do it.

    Actually Windows can be installed and booted from an external drive if the drive is connected eSATA (external SATA), since the drive is treated as if it's an internal HDD. I used the same method previously to dual-boot from 2 different HDD instead of partitioning.
    Most PC motherboards come with them as standard so it's pretty much plug and play but I don't recall seeing a recent Mac with eSATA connectivity though, so that might not be an option for you.

  • How can I get Windows (v7 x64) to open in Dreamweaver (CS5) if I right click it?

    Hi
    How can I get Windows (v7 x64) to open in Dreamweaver (CS5) if I right click it?
    None of the normal mechanisms of setting an application to be the DEFAULT application for the .HTML file type seem to work...
    Extremely irritating.
    J

    Jon Fritz II wrote:
    So when you right-click an .html file and choose Open With, what are you seeing?
    Is the check box for "Always use the selected program to open this kind of file" checked?
    A list of various "recommended applications" but not including Dreamweaver. It's not in the list of Other Applications either. And if I browse for it, my selection of dreamweaver.exe is flatly ignored without message.
    >Is the check box for "Always use the selected program to open this kind of file" checked?
    Jon Fritz II wrote:
    So when you right-click an .html file and choose Open With, what are you seeing?
    Is the check box for "Always use the selected program to open this kind of file" checked?
    A list of various "recommended applications" but not including Dreamweaver. It's not in the list of Other Applications either. And if I browse for it, my selection of dreamweaver.exe is flatly ignored without message.
    > Is the check box for "Always use the selected program to open this kind of file" checked?
    Yes.
    J

  • How Can I install Windows on my iMac??

    Hi There! I wanted to ask that how can i install windows 7 64-bit on my imac as i wanted to use some softwares and also, play some games that are not there on osx. Please tell my how to do this. I have a 2007 24-inch iMac with the following specs-
    Intel Core2 Duo CPU@ 2.40GHz
    4GB RAM (That i Upgraded Myself)
    Radeon HD2600 Pro Graphics, 256MB
    320GB HDD
    OSX 10.8 Mountain Lion

    Your Mid 2007 iMac has got a 64-bit processor that allows you to install a 64-bit Windows 7 version, but Apple doesn't give you support for it in your iMac. Only Late 2009 and newer iMacs are supported by Apple to install a 64-bit version. See > http://support.apple.com/kb/HT5634?viewlocale=en_US&locale=en_US
    My advice is to install a 32-bit Windows 7 version, although you will probably not be able to use all the RAM. Follow Apple's steps to install Windows > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
    If you still want to install a 64-bit Windows 7 version, do it, but note that it won't work properly as there are no Apple drivers for it

Maybe you are looking for

  • Fast Inverse Square Root

    I expect no replies to this thread - because there are no answers, but I want to raise awareness of a faculty of other languages that is missing in Flash that would really help 3D and games to be built in Flash. Below is an optimisation of the Quake

  • Not Able to deploy DC

    Hi All, I have created an application and tested it in the sandbox, it is working fine in this system, now I attached it to a DC, for transporting it in the Dev system, I checked in the DC and activated the activity I have created for this DC, now wh

  • Wrvs4400n firmware 1.0.12 issue

    I upgraded the firmware to 1.0.12 and immediately the wireless pc's loose their connection every so many minutes. It's like a cycle periodically dropping every 5 minutes or so. I don't know exactly how many minutes yet. The previous firmware version

  • Can't open X5 projects in RoboHelp 7 for Word

    After upgrading from X5 to 7, I tried to work on some RoboHelp for Word projects sent by a colleague who created them in X5. He and I are both working with Word 2003. The Explorer stops responding when I try to open one of these projects or one of th

  • An exception that could not be caught occurred -- SYSFAIL in QUEUE

    hi. my server shutdown for electricity problems. when i was traying to reactive queues one of then was SYSFAIL. the details of SYSFAIL was:  An exception that could not be caught occurred. i cant reactive this queue?? any suggestion?? thanks ans rega