How can I enable auto-sizing for forms? Only 1 line shows at a time.

The form I use to enter calendar information (in Microsoft SharePoint) used to show the whole form. Now when I try to create a new calendar entry I get one line visible. There is a vertical scroll bar to the right which allows me to see the whole form - one line at a time. This was not the case last May (which may have been the last time I was making new calendar entries). I've tried disabling all plug-ins, but that doesn't affect anything with the calendar entry.

There are a few issues here, ie
"uid=jwalker, ou=People, ou=test1,o=test.com.cn" has no parent.
Did you create ou=People, ou=test1,o=test.com.cn before you tried to create above dn?
Also, your suffix naming is very poor and will result in more problems later on especially since you want to create sub suffices.
you should use the DC notation, ie dc=test,dc=com,dc=cn that way you can easily attach o=test1,dc=test,dc=com,dc=cn
This way you would be able to keep your separate suffices inside separate database files and you will have less headaches when you try to replicate and do bulk re-initialisations.

Similar Messages

  • How can i enable my cookies for only one website?

    how can i enable my cookies for only one website?

    CShaya wrote:
    how can i enable my cookies for only one website?
    Safari
    There is no preference setting available for that.
    Best.

  • How can I enable spell checking for a text box that is just one line, e.g. subject in e-mail?

    In a prior version of Firefox I found a website somewhere that told me what to do to enable spell checking for text boxes that are just one line. I got used to being able to send an e-mail with a Subject Line that didn't have a misspelling. Now it doesn't work. Please tell me how I can enable that again. I am on a Mac using Firefox 6.0.2. Thanks!

    See:
    *http://kb.mozillazine.org/Spell_checking
    *http://kb.mozillazine.org/layout.spellcheckDefault
    You can set the pref <b>layout.spellcheckDefault</b> to <i>2</i> on the <b>about:config</b> page.
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold (user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

  • How do I enable auto completion for Java?

    I'm used to using Eclipse with its most excellent auto completion (ctrl-space). I also like the macro capability (type "main" then ctlr-space to insert a main block of code). Is there a way to do this in XCode? How do I enable it?
    Thanks,
    Alfredo

    Hi Alfredo
    This feature is available in the version 2.2 of Xcode for Tiger. You just turn it on in the Preferences setting.... however, I found it so annoying that I turned it off after a week or so! Perhaps you'll have better luck.
    Bob

  • How can I enable closed caption for iTunes U 1.3.1 app?

    There's no option to enable closed caption for iTunes U 1.3.1 app (iPhone 4 and iPad 3) with iOS 6.1.3.
    How can I turn closed caption on?

    Hi ericcmachado,
    Welcome to the Support Communities!
    The article below may be able to help you with this:
    Click on the link to see more details and screenshots. 
    iTunes Store: Closed captioning
    http://support.apple.com/kb/ht4613
    Cheers,
    - Judy

  • How can i enable the trace for OpenDocument URL

    When i trying to view the document through OpenDocument URL getting an error message "An error occured. Error occured while trying to view the document". But when i verified throguh infoview/cmc able to view the report with out any error for the same user.
    I verified access level and the user have required access rights "view access, View Objects" etc..
    I enabled the trace for the servers "Crystal Processing Server, Crystal Cache Server, CMS server, Report Application Server", but i didn't see any useful information.
    I'm facing the issue with Crystal Reports and didn't try with WEBI reports.
    Is there any way to debug the issue and any path to enable the trace

    Hi RVS,
    I integrated BO to my application. When i tried to open the instance through my app using OpenDocument URL, it asking the login credentials (generally it should not). Once if i provide the credentials navigating to the error page.
    I'm using the BOXI 3.1 with SP6.
    Below are the url's captured when i tried to see the instance
    http://myserver.com:8080//PlatformServices/service/app/logon.do?appKind=InfoView&service=%2FOpenDocument%2FappService.do&backContext=%2FOpenDocument&backUrl=%2Fopendoc%2FopenDocument.jsp%3FbackContext%3D%252FCrystalReports%26SERVICE%3D%252FOpenDocument%252FappService.do%26backUrl%3D%252Fview.do%26service%3Dtimeout&backUrlParents=1&appName=Open+Document&prodName=Business+Objects+Enterprise&cmsVisible=false&cms=myserver%3A6400&authenticationVisible=false&authType=secEnterprise&sso=false&sm=true&smAuth=secLDAP&sapSSOPrimary=false&persistCookies=true&sessionCookie=true&useLogonToken=true
    http://myserver.com:8080//OpenDocument/appService.do?service=skinning&resource=stylesheet
    Thanks,
    Pradeep.

  • How can I disable auto-saving for Adobe CC?

    Adobe CC is creating file versions automatically. How can I disable this option?

    1. New file versions saved automatically by the software — i.e. Photoshop
    My file
    cover_classic_v1_2
    Software generated versions
    cover_classic_v1_2-2015-01-30_19-40-52-866
    cover_classic_v1_2-2015-01-30_17-15-42-667
    2. Illustrator, Photoshop and Indesign (so far)
    3. MAC OSX

  • How can I run the report for different input values at the same time?

    Reports version: Report Builder 6.0.8.13.1
    Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
    I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
    I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
    In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like “o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
    How can I run the report at the same time for all the input values and save the time?
    Thanks in advance.
    Kishore.

    Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
    and then atleast 4 or 6 reports will run simultaneously.
    For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
    Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
    http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
    Thanks
    Subodh

  • How can i use different suffix for read-only and read-write?

    I have a directory server with 11.1.1.5,I have created the root dn:o=test.com.cn. This dn is replication enabled and it is the consumer.
    I want to create another suffix:ou=test1,o=test.com.cn and I wish to write some data from own.
    However,when I use dscc to create the suffix,I can not find any entry under the suffix.
    When I use the command:
    ldapsearch -b "ou=test1,o=test.com.cn" -s sub "objectclass=*"
    I get this:ldap_search:no such object
    I can not import any ldif to this suffix.
    I get the error:
    import test1: WARNING: Skipping entry "uid=jwalker, ou=People, ou=test1,o=test.com.cn" which has no parent, ending at line 280 of file "/opt/dsinst/test1.ldif"
    When I use dscc to change the suffix to rootdn,I get the same error too.
    How can i do now?
    Thank u very much.

    There are a few issues here, ie
    "uid=jwalker, ou=People, ou=test1,o=test.com.cn" has no parent.
    Did you create ou=People, ou=test1,o=test.com.cn before you tried to create above dn?
    Also, your suffix naming is very poor and will result in more problems later on especially since you want to create sub suffices.
    you should use the DC notation, ie dc=test,dc=com,dc=cn that way you can easily attach o=test1,dc=test,dc=com,dc=cn
    This way you would be able to keep your separate suffices inside separate database files and you will have less headaches when you try to replicate and do bulk re-initialisations.

  • How can I disable "Fingerprint Software" for programs only?

    Hi,
    somehow, the "Fingerprint Software" require from user to swipe a finger anytime he open programs that require from user to insert "user and password."
    How can I disable it permanently just for program and not for log-on?
    Thanks.

    I would have thought (hoped) this would do the job. In my case with the Truesuite Access manager software General Settings configured with the Replace Windows password logon with fingerprint logon checkbox unticked the fingerprint access logon appears whenever I go to a browser login that requires a user name and password to be specified. I have made the change to the General Settings and rebooted the computer and logged on by typing in my logon credentials. I have wiped out all the internet settings in the browser. Yet every time I visit this browser page to login the fingerprint access dialog pops up to infuriate me.
    Some postings on the internet suggest this fingerprint access is too much hassle to bother with and I am starting to believe it.
    David

  • How can i clear the vendor and customer open line items at a time same vendor as a customer of the company (same vendor same customer and equal invoices )

    my vendor and customer are same . purchase invoice due100000 and sales invoice amount is also 100000 at a time with any manual action , have any setting for cleared both vendor and customer line items at a time ...........

    X Ltd. will be Vendor & Customer.
    Purchase Invoice is booked under Vendor SAP number & Sales Invoice is booked under Customer SAP number. Then you can transfer amount from Vendor to Customer or vice versa with T-code F-04.
    Then if you have transferred amount from customer to Vendor (F-04), Vendor account will have two entries Debit & Credit. Then go for clearance with T-code F-44 clear Vendor.

  • How can I turn off the pop up message that shows up 3 times everytime I print

    Every time I print whether a new cartridge has been installed or not, I get three pop up windows telling me the black, then the tri-color and the black again have been installed successfully. i have to click thru each one to be able to print.  How can I turn this off.

    What printer are you using?
    What OS do you have?
    Does it give a program name when it pops up, or does it just give you that message and a couple of options to choose from?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How do I enable auto-complete for gmail password? I have five accounts and it works for 3 of them but not the other 2.

    I have five gmail accounts. Three of them have the auto-complete feature enabled for the password. The two most recent accounts do not auto-fill so I must type in my password every time. The auto-fill works fine on my laptop but not on my desk-top. My operating system is Windows XP.

    You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
    You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

  • How can I enable firmware password for normal boot?

    I've enabled firmware password protection, but it won't work unless you try to boot in other mode ( like holding c, d or option to boot from other drives ). However, what I want is a complete lock from opening my computer. Is there a way to enforce this?
    Best Regards

    Even if with the firmware password, you're not safe. There are ways to bypass both the firmware password and the login password. To be as safe as possible:
    1) Turn on the firmware password, as you have done
    2) Turn off auto-login, so that users have to log in to use the machine
    3) Set the login window to ask for name and password instead of displaying a list of users
    4) Use good encryption with a good password to protect any sensitive data
    or,
    4b) Don't ever let the machine out of your sight!
    Disk Utility can help with #4 through use of encrypted sparse disk images on which you store sensitive data. File Vault can also help by encrypting your entire user folder, but IMHO this is a bad idea unless absolutely necessary, as it complicates backups and means that any little disk corruption could trash your entire user directory (since it'll be stored in one big, encrypted file).

  • How can I enable Touch ID for Apple Pay without turning Passcode on?

    I have an iPhone 6 w/ iOS 8.1.
    I strongly dislike having to unlock my phone when I want to use it. Until I purchased the iPhone 6, I have never enabled a passcode. My phone is never out of my immediate control and when I want to access my phone, I want to access it immediately, not put in a passcode or wait for it to recognize my finger print.
    There are separate settings for "Turn Passcode On/OFF" and for enabling the use of Touch ID for Unlock/Apple Pay/iTunes. However, if you turn off passcode, All three of the Touch ID Options are immediately disabled. Unlock makes sense, as your phone would no longer be "locked". However disabling Apple Pay and especially iTunes/App Store (since those purchases require you enter your Apple ID Password, NOT the passcode!) does not make sense.
    The inconvenience of the extra unlock step every time I want to use my phone to do anything almost certainly will negate any convenience of using my phone to make purchases.
    Am I missing a configuration? If not there should be a way to use Touch ID without having an unlock passcode!

    fsbtb1 wrote:
    I have an iPhone 6 w/ iOS 8.1.
    I strongly dislike having to unlock my phone when I want to use it. Until I purchased the iPhone 6, I have never enabled a passcode. My phone is never out of my immediate control and when I want to access my phone, I want to access it immediately, not put in a passcode or wait for it to recognize my finger print.
    There are separate settings for "Turn Passcode On/OFF" and for enabling the use of Touch ID for Unlock/Apple Pay/iTunes. However, if you turn off passcode, All three of the Touch ID Options are immediately disabled. Unlock makes sense, as your phone would no longer be "locked". However disabling Apple Pay and especially iTunes/App Store (since those purchases require you enter your Apple ID Password, NOT the passcode!) does not make sense.
    The inconvenience of the extra unlock step every time I want to use my phone to do anything almost certainly will negate any convenience of using my phone to make purchases.
    Am I missing a configuration? If not there should be a way to use Touch ID without having an unlock passcode!
    NO in order to use the touch id, you need to enable a 4 digit passcode.
    No way around that.
    Imagine when you lose your phone and the person who has it can access anything on your phone because it's an extra step to have to use the touch id or enter the 4 digit passcode to lock/unlock your phone.

Maybe you are looking for

  • All Photos view in full screen can't happen?

    Just want to be sure I'm not missing something.  When I'm using iPhoto in full screen mode, I only have Events, Faces, Places, Albums, Projects and NO PHOTOS view.  Right?

  • Can we run a query with variable screen at start up in Bex Analyzer

    Hello all, I have a query which asks for fiscal year and posting period at the start of query run. But when I run the query in analyzer, it gives me this error all the time. "Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION System error in

  • Hyperlink to highlighted text in PDF

    I'm trying to add a hyperlink to a FM file that will open a PDF to a specified phrase. I've successfully added #page=x (x=desired page number) to open a PDF to a sepcific page number, but I'm unable to open a PDF to a desired word or phrase via an ex

  • Screen not responding correctly.

    Has anyone else had issues with their screen not responding correctly.Mine is typing wrong charaters or none at all. I've updated to the latest ios. restored, reset and everything else I can think of. The phone is less than 6 months old.

  • Xml response in browser .. how to deal with

    OK .. I have a basic question here but I'm long winded so bear with me. Background: I am submitting an HTML form to a secure website, with a username/password, and that web site in turn returns me a webpage with XML in it that looks something like th