How can I enable my I pad? I already conected to itunes still not able to use it.

My ipad is disabled and cannot fix it with the restore with itunes. I tryed it twice took 9 hours to retore it both times still not working.

Did you try recovery mode? If you try this, temporarily disable your firewall and antivirus software as well when you do go through the process.
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Similar Messages

How can I hide or delete updates from the App Store I am not interested in using?

How can I hide or delete updates from the App Store I am not interested in using?

This works for apps you've acquired, but does not work for built-in features. I am regularly nagged to update Digital Camera RAW Compatibility (currently I'm being nagged about Update 6.03). I've tried the method described above - the steps are available, but they appear to have no effect. I think this is perhaps because RAW compatibility is an element of OSX rather than a separate app. I don't use RAW format with cameras, and have no need for this feature. Even if I did, I have none of the 13 camera models listed in this update.
It is just a nuisance, but if anyone knows how to suppress this I would appreciate instructions.
I would also be curious if anyone can explain why on earth Apple would incorporate RAW camera format compatibility into the core of its operating system. It shakes my confidence in their operating system design.

Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

Hi Tech5Apple,
Thanks for visiting Apple Support Communities.
If you continue to see unexpected behavior when accessing the iTunes Store, the troubleshooting steps in this article can help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
All the best,
Jeremy

How can i enabled hyper-v ?(i'm tried BİOS its not here)

Hi i installed windows embedded industry pro x64 from dreamSpark Before my computer is using windows 8.1 SL and now im trying build a application to windows phone but hyper v is not enabled i tried BİOS but i can found any "virtualizition= disabled"
options.
my device properties;
4GB RAM
WİNDOWS EMBEDDED İNDUSRTRY PRO 8.1
AMD A4 QUAD-CORE
and if i install virtualbox can i use with visual studio and it can runnnig windowsphone emulator ??
yok

Hyper-V is an installable option, check the control panel Program and Features to see if it is available for install.
If you use VirtualBox, you will have to install an operating system in a VM.
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

How can I copy mp3 files which are already located by itunes to the actual itunes folder?

Dear all,
I would like to transfer my whole itunes library to a new computer. I know that this can be done by copying the whole itunes folder on the old computer (if you want to keep all the data of the itunes files). However, I have a little problem. Since I had a long period in which I did not download music from itunes or I got music from others, most files are not in the itunes library folder. I kept them in many different folders all over my hard disk, because it is a quite big collection from the past decade orso. In that time, I just dragged the files to itunes, so itunes can now locate them. They are not in the actual itunes library folder though. Is there a possible way to let itunes locate the files (it already has the locations) and put/copy them in the itunes library folder?
Thanks in advance!!

With these options selected in Edit > Preferences > Advanced:
select File > Library > Organize Library... When you get this prompt:
check the Consolidate files box and - if not greyed out - the Reorganize files ... box, and click OK. iTunes will then copy any media files that are not stored in the iTunes Media folder structure into it, so that you can then copy the complete iTunes folder to your new computer.

How can I get my iphone to synch with Outlook? I do not want to use Icloud.

I am a realtor and have used Outlook for years, but am unable to get my iphone to synch with Outlook. Does anyone have a solution? I have been to the Apple store and have had more than one person working on it, to no avail.

Not sure what you've already tried, but sometimes you have to uninstall iTunes and all it's components as described here: http://support.apple.com/kb/HT1925, then reinstall iTunes. (This would be necessary if the Outlook plugin is missing or corrupt.) You won't loose your iTunes library or media by doing this.

HT1222 When i try to record a video with my camer or want to facetime with someone, the sound is very low, my normal sound like sounds of games do work. How can i fix this.? I already have the latest ios and i am using the ipad mini.

Help me please!

Hi,
If you have not already I would change the Slide size to something that has a 4:3 Ratio.
The Buddy maybe trying to scroll left and right to see the whole slide although this shoud be controlled at you end.
I would open the Connection Doctor during a Chat (iChat's Video menu).
Check that both Bit Rates are relatively stable (there is always some variance.)
Anything over 5% particularly if over 500kbps is likely to be causing problems.
You could try limiting the Bandwidth (iChat Menu > Preferences > Video section) to 500kbps at both ends
It may pay to drop to 200kbps as a test. (you may lose the Side by Side presentation at this speed).
10:12 PM Tuesday; June 21, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How do i contact someone about my satisfaction with my iphone? im not able to use my phone during the day because im at work

I bought an iphone 4 in august of this year, i had to have another one sent to me because it was freezing up on me. The new phone i recieved is doing the same thing and I have a hard time getting the phone to charge. I didn't pay all that money for a phone to not work like it is suppose to. I am not trying to be difficult and complain however I just feel that I payed too much money to be having all of these problems with this phone.

There is a Contact Us link at the bottom right of every forum page.
Best of luck.

How can we enable the trace at schema / user level

Hi ,
I knew how to enable the trace at session level and system level.
How can we enable trace at schema / user level.
Thanks
Naveen

I still don't understand.
As far as I know, 'trace' means 'to emit information about a subset of the steps being taken through code, generally to profile timing or identify code paths'.
As far as I know, a user and a schema are passive. There is absolutely no code 'running' against a user or a schema. I have no idea what could be 'traced' for a user or schema that is not already available in the data dictionary.
Further, a schema is nothing other than a named set of database objects. The name happens to be tied to a specific userid. So a schema could be considered a special kind of userid - although that is technically incorrect.
A session, on the other hand, is active. There is code running, there is memory assigned. It happens to link to the connection established by a user, using a specific userid.
I think you have told us you know how to turn on tracing for a session.
Why can you not turn on the traciong for all the sessions for a userid?

How can I enable embedded pl/sql gateway to run on port 80

I have a new 11G install on OEL 4.0, database created. I would like to be
able to access the instance using the pl/sql gateway. Works fine with
port 8080, the default. How to I enable it to run on port 80?
I found this statement in the following docuementation:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb22pro.htm#ADXDB2500
Using HTTP(S) on Nonstandard Ports
By default, HTTP listens on a nonstandard, unprotected port: 8080. To use HTTP(S) on
the standard port, such as 80, your DBA must chown the TNS listener to setuid ROOT
rather than setuid ORACLE, and configure the port number in the Oracle XML DB
configuration file /xdbconfig.xml.I have root priviledges on the box.
I've tried setting the listener file permissions:
chown root:dba /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
chmod 6775 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
Also put root in the dba group.
The permissions turn out like this:
-rwsr-sr-x 1 root dba 830854 Jun 17 21:04 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
I stopped the listener, bounced the database, and started the listener again.
But it still shows the process being owned by oracle:
oracle 29682 1 0 21:08 ? 00:00:00 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr LISTENER -inherit
Changing the port is easy:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
8080 2100
At this point, I can access the apex home page with the following url:
http://hostname:8080/apex/f?p=4550:10:1454849288245548
I can than change it to port 80:
SYS>begin
dbms_xdb.sethttpport('80');
dbms_xdb.setftpport('2100');
end;
2 3 4 5
PL/SQL procedure successfully completed.
SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
80 2100
When I try to access apex with the following url:
http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
I get the following:
Failed to Connect
Firefox can't establish a connection to the server at hostname.com.
Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings
* can interfere with Web browsing.I can set the port. Just can't talk to it.
This is the entry from the listener log:
<msg time='2008-07-03T15:40:09.741-06:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='hostname'
host_addr='xxx.xxx.xxx.xxx'>
<txt>TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
Linux Error: 13: Permission denied
</txt>
</msg>
So this looks like an permissions problem. But where? I posted
this on the apex forum here:
Re: How can I enable embedded pl/sql gateway to run on port 80
They suggested asking here.

No, that thread did not provide the information that I need. Some more data:
I have the port set to 8080:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
8080 2100
At this point, I can access the apex home page with the following url:
http://hostname:8080/apex/f?p=4550:10:1454849288245548
I can than change it to port 80:
SYS>begin
dbms_xdb.sethttpport('80');
dbms_xdb.setftpport('2100');
end;
2 3 4 5
PL/SQL procedure successfully completed.
SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
80 2100
When I try to access apex with the following url:
http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
I get the following:
Failed to Connect
Firefox can't establish a connection to the server at hostname.com.
Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
I can set the port. Just can't talk to it.

TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

How can I enable SuperFetch?

Hi,
I downloaded Java from Java.com (free download) to be able to open a file I received as email attachment. After the download something happened to my laptop pc (Windows 7). I received pop up messages that said something like "Your computer got infected
you need to install Windows Defender 2015. And they started to pop up almost every second and also the screen view changed. It got upside down or windows messages moved and seemed to be multiplied, very unusual things kept going...
I stopped it and went online on my tablet pc and looked for what to do if my computer got infected with virus (because that's what I thought happened). From what I read online I made sure that all Microsoft windows experts were all recommending to start
my pc in safe mode and I found some instructions such as going to Task Manager and ending processes and also to clear some files and folders in Registry Editor. I wasn't able to clear files and folder in Registry Editor. To make short, I came to the conclusion
that I needed live help from a Microsoft expert. I chatted online with some MS Support Desk techs and followed their instructions but it didn't help at all. When I click on the little flag icon with a red cross sign on it(the one that says Open Action Center)
it says 1 important message-Turn on Windows Security Center service(Important) I tried to turn it on (I don't know how many times!) but I get the message "The Windows Security Center can't be started"
I went to Troubleshooting and clicked on Check of Performance issues (under System and Security) it did checking and I got the message "Problems Found- SuperFetch is not running. Not Fixed.
My question is: HOW CAN I GET SuperFetch running? or How can I enable SuperFetch?
Thank you.
Elif YILDIRIM

Hi Temur, ok. I do the above procedure and it worked fine
Now, I have other question?
How can I reproduce any file (for example: a video, an url page, an image), that is in the flash of DMP?
Índice de ftp://172.17.15.22/tmp/ftproot/tmp/ftproot/tmp/ftproot/usb_1/
Subir al directorio superior.
Nombre Tamaño Última modificación
Sample Videos.lnk
1 KB
17/06/2011
06:25:00 a.m.
deployment
29/06/2010
04:14:00 a.m.
lost+found
25/02/2010
12:00:00 a.m.
video futbol en la playa.mp4
1390 KB
29/06/2010
01:08:00 a.m.
videofutbol.mp4
1390 KB
29/06/2010
01:38:00 a.m.
I like, that el DMP when loss conectivity with DMM, It display at the LCD screen, the video named videofutbol.mp4, this video As I show in the picture above, already in the flash of DMP.
I appreciate your early response.
Thanks

How can you enable back the Android native Menu button in AIR 2.7?

I've noticed in AIR 2.7 for Android, that now the bottom icons in Android 3.0 Honeycomb are hidden (replaced by small dots) in AIR 2.7, whereas in AIR 2.6 they were always visible. That's cool. Since the bottom bar can never be hidden in Android 3, at least now those icons are less visible (unless you intentionally touch the bottom bar, then the icons show up for a few seconds).
BUT I also noticed in AIR 2.7 compiled apps, the native "Menu" icon is not visible anymore, even after touching the bottom bar. In AIR 2.6 you could see and press that button (which can be captured from AIR so you can show a custom settings menu or whatever).
So, quoting the subject --> How can you enable back the Android native Menu button in AIR 2.7?

There is a work around and a reason for the menu issue. Honeycomb doesn't natively support a menu softkey, it is only to support old apps comiled in phone API levels. If you compile a Honeycomb app in 2.7 or 3.0, it is expected you manage the settings within the larger tablet UI framework. See below link for more info and work around.
http://forums.adobe.com/message/3964792#3964792

How Can I Enable "Creative S/W Synth" in Windows

I have a "Sound Balster Li've! 5." sound card and I'm using Windows XP. When I was using Windows ME before, the MIDI output devices that were available in WinME were:- A: SB Li've! MIDI Synth2- B: SB Li've! MIDI Synth3- Creative S/W Synth4- MIDI Mapper
BUT, when I'm using Windows XP, the third and the fourth outputs disappeared and they were replaced with:- SB Li've! MIDI UART- Microsoft GS Wavetable SW Synth
How can I enable "Creative S/W Synth" in Windows XP? Can't it be available in WinXP, or is there a way to enable it's Even if that MIDI device output is of low quality.

I want to know how to enable that MIDI output device. I don't know if it's related to soundfonts or not. I tried uninstalling and reinstalling the sound card drivers many times, but I couldn't enable that MIDI device. Do you think it is related to the drivers of the sound card. I really like that MIDI device and want it to be my default MIDI device. The system that I'm using is:
Pentium 4 - .7 GHz
256 MB RAM
Windows XP Service Pack 2
The sound card is:
Sound Blaster Li've! 5.
Thank you.

How can I enable my I pad? I already conected to itunes still not able to use it.

Similar Messages

Maybe you are looking for