How can i enable my iphone4 to request my PassCode before it will Power OFF, in case it's stolen, so that "Find my Iphone" will still be of Use?

can anyone tell me how i can set my iphone4 so that i can't turn it off without first entering my PassCode? at the moment i need to enter it after it has been asleep for a while, but NOT if i turn it OFF. that's ok for everyday use but not so good for when it gets stolen, as my sister recently discovered because the 'Find my Iphone' facility doesn't work when the iphone is switched off. the thief may just turn off the phone and dump it in the next ditch, but there is no chance of recovering it if the phone can be turned off without having to enter the passcode first. (ever other phone i ever owned before needed to have the passcode entered, if it was enabled, before it could be switched off).
so, if anyone knows, could you please give me instructions on how to enable my iphone 4 so that it will ask for my passcode before switching off and if it isn't entered it will not turn off?
i would really appreciate your h

Not all thieves are really intelligent, but still ...
Why would a thief steal your iPhone if the intent is simply to turn it off and toss it in a ditch?

Similar Messages

  • I recently changed my Apple ID to a new email address. My old one still is in my phone, and cannot be permanently deleted as it says that Find my iPhone is still on. I can't turn it off because I do not have the password to my old "deleted" Apple ID.

    I recently changed my Apple ID to a new email address. My old one still is in my phone, and cannot be permanently deleted as it says that Find my iPhone is still on. I can't turn it off because I do not have the password to my old "deleted" Apple ID. If you can help, please do! Thank you very much!

    I have the EXACT SAME PROBLEM and have been researching the past 2 hours!!!! Aaargh!

  • How can I set the phone to request the passcode after being turned off

    My old phone had this feature..I wonder if it exists for the iPhone 4 S
    Thanks

    To take advantage of All the Features in iOS 5 See Here...
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • How can I return my iPhone4 to OS6 from OS7?

    How can I return my iPhone4 to OS6 from OS7?

    Several people on this discussion board have bought old phones that had not yet been updated and sold their updated phones.

  • TS3367 How can I enable FaceTime on iPhone4? (purchased from Kuwait)

    How can I enable FaceTime on my iPhone4 which was purchased in Kuwait?
    Any help or tips greatly appreciated!

    Several Middle Eastern Countries' governments have prevented FaceTime from operating in their countries.  Kuwait is one of them, so iPhones purchased in Kuwait have the feature permanently disabled. Sorry.
    Hope this helps

  • How can i create a new transport request?

    Dear Experts,
    Some colleagues have to modify a master record, but save time, failing to produce a request no., then, how can i create a new transport request?
    Wilson

    Hi,
    Please let us know about the issue when you create the new Transport request .
    In which system you are creating the request . Hope its in Development  .
    If so , check the entries are enabled in SCC4 > Changes without automatic recording
    Changes to repository objects and cross client customizing allowed .
    Protection level 0
    If these entries are enabled, you must be able to create Transport requests.
    Please check and update .
    Regards,
    Nibu

  • How can we see status of all Requests at a time using any tables?

    How can we see status of all Requests at a time in the Info cube or ODS using any tables? what I am facing was while I run a Process Chain in some data targets red requests remains and due to this all other requests doesnot available for reporting.
    Now is there any T-Code or Table to view all requests in a single shot.
    Thanks in advance,
    Raj

    Hi Go for RSMONICDP give timestamp and u'll have it.
    Please assign points if useful
    Edited by: Aadil on Jan 21, 2008 7:43 AM

  • How can I enable embedded pl/sql gateway to run on port 80

    I have a new 11G install on OEL 4.0, database created. I would like to be
    able to access the instance using the pl/sql gateway. Works fine with
    port 8080, the default. How to I enable it to run on port 80?
    I found this statement in the following docuementation:
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb22pro.htm#ADXDB2500
    Using HTTP(S) on Nonstandard Ports
    By default, HTTP listens on a nonstandard, unprotected port: 8080. To use HTTP(S) on
    the standard port, such as 80, your DBA must chown the TNS listener to setuid ROOT
    rather than setuid ORACLE, and configure the port number in the Oracle XML DB
    configuration file /xdbconfig.xml.I have root priviledges on the box.
    I've tried setting the listener file permissions:
    chown root:dba /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
    chmod 6775 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
    Also put root in the dba group.
    The permissions turn out like this:
    -rwsr-sr-x 1 root dba 830854 Jun 17 21:04 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
    I stopped the listener, bounced the database, and started the listener again.
    But it still shows the process being owned by oracle:
    oracle 29682 1 0 21:08 ? 00:00:00 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr LISTENER -inherit
    Changing the port is easy:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port FTP-Port
    8080 2100
    At this point, I can access the apex home page with the following url:
    http://hostname:8080/apex/f?p=4550:10:1454849288245548
    I can than change it to port 80:
    SYS>begin
    dbms_xdb.sethttpport('80');
    dbms_xdb.setftpport('2100');
    end;
    2 3 4 5
    PL/SQL procedure successfully completed.
    SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port FTP-Port
    80 2100
    When I try to access apex with the following url:
    http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
    I get the following:
    Failed to Connect
    Firefox can't establish a connection to the server at hostname.com.
    Though the site seems valid, the browser was unable to establish a connection.
    * Could the site be temporarily unavailable? Try again later.
    * Are you unable to browse other sites? Check the computer's network connection.
    * Is your computer or network protected by a firewall or proxy? Incorrect settings
    * can interfere with Web browsing.I can set the port. Just can't talk to it.
    This is the entry from the listener log:
    <msg time='2008-07-03T15:40:09.741-06:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='hostname'
    host_addr='xxx.xxx.xxx.xxx'>
    <txt>TNS-12546: TNS:permission denied
    TNS-12560: TNS:protocol adapter error
    TNS-00516: Permission denied
    Linux Error: 13: Permission denied
    </txt>
    </msg>
    So this looks like an permissions problem. But where? I posted
    this on the apex forum here:
    Re: How can I enable embedded pl/sql gateway to run on port 80
    They suggested asking here.

    No, that thread did not provide the information that I need. Some more data:
    I have the port set to 8080:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port FTP-Port
    8080 2100
    At this point, I can access the apex home page with the following url:
    http://hostname:8080/apex/f?p=4550:10:1454849288245548
    I can than change it to port 80:
    SYS>begin
    dbms_xdb.sethttpport('80');
    dbms_xdb.setftpport('2100');
    end;
    2 3 4 5
    PL/SQL procedure successfully completed.
    SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port FTP-Port
    80 2100
    When I try to access apex with the following url:
    http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
    I get the following:
    Failed to Connect
    Firefox can't establish a connection to the server at hostname.com.
    Though the site seems valid, the browser was unable to establish a connection.
    * Could the site be temporarily unavailable? Try again later.
    * Are you unable to browse other sites? Check the computer's network connection.
    * Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
    I can set the port. Just can't talk to it.

  • TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

    How can i enable both paired bluetooth and ios keyboard input at the same time?
    This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

    You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
    I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
    https://developer.apple.com

  • How can i transfer my iphone4 content to my itune Library

    How can i transfer my iphone4 content to my itune Library

    Just google it, there are lots of third party softwares that allows you to transfer data between your iPhone and your computer like iFunbox (which is free). You can transfer photos, app data, videos and other stuff. If you wan't to transfer photos though, you can use iCloud Photo Stream and download iCloud Control Panel for Windows and Mac. With it you can also view notes that you made from iPhone and transferred wirelessly through iCloud servers.

  • I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

  • How can I enable SuperFetch?

    Hi,
    I downloaded Java from Java.com (free download) to be able to open a file I received as email attachment. After the download something happened to my laptop pc (Windows 7). I received pop up messages that said something like "Your computer got infected
    you need to install Windows Defender 2015. And they started to pop up almost every second and also the screen view changed. It got upside down or windows messages moved and seemed to be multiplied, very unusual things kept going...
    I stopped it and went online on my tablet pc and looked for what to do if my computer got infected with virus (because that's what I thought happened). From what I read online I made sure that all Microsoft windows experts were all recommending to start
    my pc in safe mode and I found some instructions such as going to Task Manager and ending processes and also to clear some files and folders in Registry Editor. I wasn't able to clear files and folder in Registry Editor. To make short, I came to the conclusion
    that I needed live help from a Microsoft expert. I chatted online with some MS Support Desk techs and followed their instructions but it didn't help at all. When I click on the little flag icon with a red cross sign on it(the one that says Open Action Center)
    it says 1 important message-Turn on Windows Security Center service(Important) I tried to turn it on (I don't know how many times!) but I get the message "The Windows Security Center can't be started"
    I went to Troubleshooting and clicked on Check of Performance issues (under System and Security) it did checking and I got the message "Problems Found- SuperFetch is not running. Not Fixed. 
    My question is: HOW CAN I GET SuperFetch running? or How can I enable SuperFetch?
    Thank you.
    Elif YILDIRIM

    Hi Temur, ok. I do the above procedure and it worked fine
    Now, I have other question?
    How can I reproduce any file (for example: a video, an url page, an image), that is in the flash of DMP?
    Índice de ftp://172.17.15.22/tmp/ftproot/tmp/ftproot/tmp/ftproot/usb_1/
    Subir al directorio superior.
    Nombre Tamaño Última modificación
    Sample Videos.lnk
    1 KB
    17/06/2011
    06:25:00 a.m.
    deployment
    29/06/2010
    04:14:00 a.m.
    lost+found
    25/02/2010
    12:00:00 a.m.
    video futbol en la playa.mp4
    1390 KB
    29/06/2010
    01:08:00 a.m.
    videofutbol.mp4
    1390 KB
    29/06/2010
    01:38:00 a.m.
    I like, that el DMP when loss conectivity with DMM, It display at the LCD screen, the video named videofutbol.mp4, this video As I show in the picture above, already in the flash of DMP.
    I appreciate your early response.
    Thanks

  • How can you unlock a iphone4s sprint for a family member in russia?

    How can you unlock a iphone4s sprint for a family member in russia? i sold it to them but when they took it back to russia is locked them out as if someone has stolen the phone.

    Contact Sprint to see if they offer unlocking and if you qualify.
    Only the wireless carrier to which the iPhone is locked can unlock it.

  • How can you enable back the Android native Menu button in AIR 2.7?

    I've noticed in AIR 2.7 for Android, that now the bottom icons in Android 3.0 Honeycomb are hidden (replaced by small dots) in AIR 2.7, whereas in AIR 2.6 they were always visible. That's cool. Since the bottom bar can never be hidden in Android 3, at least now those icons are less visible (unless you intentionally touch the bottom bar, then the icons show up for a few seconds).
    BUT I also noticed in AIR 2.7 compiled apps, the native "Menu" icon is not visible anymore, even after touching the bottom bar. In AIR 2.6 you could see and press that button (which can be captured from AIR so you can show a custom settings menu or whatever).
    So, quoting the subject --> How can you enable back the Android native Menu button in AIR 2.7?

    There is a work around and a reason for the menu issue.  Honeycomb doesn't natively support a menu softkey, it is only to support old apps comiled in phone API levels.  If you compile a Honeycomb app in 2.7 or 3.0, it is expected you manage the settings within the larger tablet UI framework.  See below link for more info and work around. 
    http://forums.adobe.com/message/3964792#3964792

  • How Can I Enable "Creative S/W Synth" in Windows

    I have a "Sound Balster Li've! 5." sound card and I'm using Windows XP. When I was using Windows ME before, the MIDI output devices that were available in WinME were:- A: SB Li've! MIDI Synth2- B: SB Li've! MIDI Synth3- Creative S/W Synth4- MIDI Mapper
    BUT, when I'm using Windows XP, the third and the fourth outputs disappeared and they were replaced with:- SB Li've! MIDI UART- Microsoft GS Wavetable SW Synth
    How can I enable "Creative S/W Synth" in Windows XP? Can't it be available in WinXP, or is there a way to enable it's Even if that MIDI device output is of low quality.

    I want to know how to enable that MIDI output device. I don't know if it's related to soundfonts or not. I tried uninstalling and reinstalling the sound card drivers many times, but I couldn't enable that MIDI device. Do you think it is related to the drivers of the sound card. I really like that MIDI device and want it to be my default MIDI device. The system that I'm using is:
    Pentium 4 - .7 GHz
    256 MB RAM
    Windows XP Service Pack 2
    The sound card is:
    Sound Blaster Li've! 5.
    Thank you.

Maybe you are looking for