How can i enable my wifi adapter on my probook 4530s?
push button is continusly amber , even when i push the button it doesn't go white what to do?????????? plz help me out??
Hi
You have a couple of options as I see it please try these steps might help you to fix your issue.
1) Disconnect the Battery & Adapter then press & hold the power button on Notebook for 30 seconds then turn on the unit and check if the Wireless light turns on.
2) Go to Device manager then uninstall the wireless drivers from Network Adapter and restart the unit and check if the light turns on.
3) Try doing a system restore to the date where unit was working fine.
4) Please update the Bios & Wireless driver from HP website.
5) Click start in search type Recovery Manager then click on it select Yes on User access control then select I need immediate help then select Driver & application recovery select the wireless driver and install it then restart the unit.
6) If you are comfortable reseating the wireless card which will be on the back panel off your unit you could try this steps as well.
If still you have the same issue then you need to call HP Technical support and get the part replaced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Similar Messages
-
How can i adjust my screen brightness​? HP ProBook 4530s
I cant adjust my screen brightness. Fn+f2, f3 show the brightness bar at the dimmest point and doesnt make any change. The manual way of going through Control Panel then display, personaisation also doesnt work. I am running Win 7 Pro registered version. This si really annoying and strains my eyes to the point that i just cant work. Please give me a fix. Thanks for reading.
Hi:
Did you install the Intel chipset driver and the applicable graphics driver for your model?
Normally the reason you can't adjust the brightness is due to one or both of those drivers not being installed. -
How can I enable embedded pl/sql gateway to run on port 80
I have a new 11G install on OEL 4.0, database created. I would like to be
able to access the instance using the pl/sql gateway. Works fine with
port 8080, the default. How to I enable it to run on port 80?
I found this statement in the following docuementation:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb22pro.htm#ADXDB2500
Using HTTP(S) on Nonstandard Ports
By default, HTTP listens on a nonstandard, unprotected port: 8080. To use HTTP(S) on
the standard port, such as 80, your DBA must chown the TNS listener to setuid ROOT
rather than setuid ORACLE, and configure the port number in the Oracle XML DB
configuration file /xdbconfig.xml.I have root priviledges on the box.
I've tried setting the listener file permissions:
chown root:dba /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
chmod 6775 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
Also put root in the dba group.
The permissions turn out like this:
-rwsr-sr-x 1 root dba 830854 Jun 17 21:04 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
I stopped the listener, bounced the database, and started the listener again.
But it still shows the process being owned by oracle:
oracle 29682 1 0 21:08 ? 00:00:00 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr LISTENER -inherit
Changing the port is easy:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
8080 2100
At this point, I can access the apex home page with the following url:
http://hostname:8080/apex/f?p=4550:10:1454849288245548
I can than change it to port 80:
SYS>begin
dbms_xdb.sethttpport('80');
dbms_xdb.setftpport('2100');
end;
2 3 4 5
PL/SQL procedure successfully completed.
SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
80 2100
When I try to access apex with the following url:
http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
I get the following:
Failed to Connect
Firefox can't establish a connection to the server at hostname.com.
Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings
* can interfere with Web browsing.I can set the port. Just can't talk to it.
This is the entry from the listener log:
<msg time='2008-07-03T15:40:09.741-06:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='hostname'
host_addr='xxx.xxx.xxx.xxx'>
<txt>TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
Linux Error: 13: Permission denied
</txt>
</msg>
So this looks like an permissions problem. But where? I posted
this on the apex forum here:
Re: How can I enable embedded pl/sql gateway to run on port 80
They suggested asking here.No, that thread did not provide the information that I need. Some more data:
I have the port set to 8080:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
8080 2100
At this point, I can access the apex home page with the following url:
http://hostname:8080/apex/f?p=4550:10:1454849288245548
I can than change it to port 80:
SYS>begin
dbms_xdb.sethttpport('80');
dbms_xdb.setftpport('2100');
end;
2 3 4 5
PL/SQL procedure successfully completed.
SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
HTTP-Port FTP-Port
80 2100
When I try to access apex with the following url:
http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
I get the following:
Failed to Connect
Firefox can't establish a connection to the server at hostname.com.
Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
I can set the port. Just can't talk to it. -
How can I enable synch without losing my apps?
Hello,
I read the forums and I cannot find a solution to my unique situation.
I have a 2nd gen iPod Touch and synced apps and music with iTunes and everything was mostly great. The only problem was the slowness of iTunes so I started using MediaMonkey instead to transfer music. I also downloaded apps exclusively through wifi, so I never bothered to sync my iPod with iTunes for months. Then I upgraded the harddrive, did a clean install of Windows, and sold my old harddrive. It was not possible to sync my iPod anymore and I didn't care because MediaMonkey/Wifi worked perfectly for my needs ...
Until I installed firmware 3.1! Now MediaMonkey crashes and I can't add/remove songs from my iPod. So I was going to wipe my iPod and give the new version of iTunes another try, but now I am worried about losing all the apps I've downloaded over wifi. I've logged into iTunes and I cannot find a record of apps that I have downloaded/purchased. *Which brings me to my question: How can I enable synch without losing my apps?* I'm particularly worried about the apps that were free when I got them but they now cost money.
Thank you for your time,
bougatsaThe "File -> Transfer Purchases" option didnt work at first, but then I clicked around and managed to get this new computer image added to the new Home Sharing feature. Now all my iPod apps have been transferred to my local iTunes apps folder, thank you Julian!
And Anna, thank you (tack?), I believe you that it works but now that I have my apps locally I won't try I'm sure you'll understand.
I had bad thoughts of ditching my iPod for something else but I won't now! This forum rocks! Thank you all again
Bougatsa -
TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?
How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com -
I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?
iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications
-
How can I enable SuperFetch?
Hi,
I downloaded Java from Java.com (free download) to be able to open a file I received as email attachment. After the download something happened to my laptop pc (Windows 7). I received pop up messages that said something like "Your computer got infected
you need to install Windows Defender 2015. And they started to pop up almost every second and also the screen view changed. It got upside down or windows messages moved and seemed to be multiplied, very unusual things kept going...
I stopped it and went online on my tablet pc and looked for what to do if my computer got infected with virus (because that's what I thought happened). From what I read online I made sure that all Microsoft windows experts were all recommending to start
my pc in safe mode and I found some instructions such as going to Task Manager and ending processes and also to clear some files and folders in Registry Editor. I wasn't able to clear files and folder in Registry Editor. To make short, I came to the conclusion
that I needed live help from a Microsoft expert. I chatted online with some MS Support Desk techs and followed their instructions but it didn't help at all. When I click on the little flag icon with a red cross sign on it(the one that says Open Action Center)
it says 1 important message-Turn on Windows Security Center service(Important) I tried to turn it on (I don't know how many times!) but I get the message "The Windows Security Center can't be started"
I went to Troubleshooting and clicked on Check of Performance issues (under System and Security) it did checking and I got the message "Problems Found- SuperFetch is not running. Not Fixed.
My question is: HOW CAN I GET SuperFetch running? or How can I enable SuperFetch?
Thank you.
Elif YILDIRIMHi Temur, ok. I do the above procedure and it worked fine
Now, I have other question?
How can I reproduce any file (for example: a video, an url page, an image), that is in the flash of DMP?
Índice de ftp://172.17.15.22/tmp/ftproot/tmp/ftproot/tmp/ftproot/usb_1/
Subir al directorio superior.
Nombre Tamaño Última modificación
Sample Videos.lnk
1 KB
17/06/2011
06:25:00 a.m.
deployment
29/06/2010
04:14:00 a.m.
lost+found
25/02/2010
12:00:00 a.m.
video futbol en la playa.mp4
1390 KB
29/06/2010
01:08:00 a.m.
videofutbol.mp4
1390 KB
29/06/2010
01:38:00 a.m.
I like, that el DMP when loss conectivity with DMM, It display at the LCD screen, the video named videofutbol.mp4, this video As I show in the picture above, already in the flash of DMP.
I appreciate your early response.
Thanks -
How can I find my wife's iPhone? She has a different iCloud account from me.
How can I find my wife's iPhone? She has a different iCloud account from me. I can find all of my devices on my iCloud account. But since the last software update we needed to set up separate iCloud accounts in order to be able to use iMessage independently.
Interesting. This never occurred to be a problem to me but I think I can see your point. Leave feedback for Apple on this here:
http://www.apple.com/feedback/icloud.html -
How can you enable back the Android native Menu button in AIR 2.7?
I've noticed in AIR 2.7 for Android, that now the bottom icons in Android 3.0 Honeycomb are hidden (replaced by small dots) in AIR 2.7, whereas in AIR 2.6 they were always visible. That's cool. Since the bottom bar can never be hidden in Android 3, at least now those icons are less visible (unless you intentionally touch the bottom bar, then the icons show up for a few seconds).
BUT I also noticed in AIR 2.7 compiled apps, the native "Menu" icon is not visible anymore, even after touching the bottom bar. In AIR 2.6 you could see and press that button (which can be captured from AIR so you can show a custom settings menu or whatever).
So, quoting the subject --> How can you enable back the Android native Menu button in AIR 2.7?There is a work around and a reason for the menu issue. Honeycomb doesn't natively support a menu softkey, it is only to support old apps comiled in phone API levels. If you compile a Honeycomb app in 2.7 or 3.0, it is expected you manage the settings within the larger tablet UI framework. See below link for more info and work around.
http://forums.adobe.com/message/3964792#3964792 -
How Can I Enable "Creative S/W Synth" in Windows
I have a "Sound Balster Li've! 5." sound card and I'm using Windows XP. When I was using Windows ME before, the MIDI output devices that were available in WinME were:- A: SB Li've! MIDI Synth2- B: SB Li've! MIDI Synth3- Creative S/W Synth4- MIDI Mapper
BUT, when I'm using Windows XP, the third and the fourth outputs disappeared and they were replaced with:- SB Li've! MIDI UART- Microsoft GS Wavetable SW Synth
How can I enable "Creative S/W Synth" in Windows XP? Can't it be available in WinXP, or is there a way to enable it's Even if that MIDI device output is of low quality.I want to know how to enable that MIDI output device. I don't know if it's related to soundfonts or not. I tried uninstalling and reinstalling the sound card drivers many times, but I couldn't enable that MIDI device. Do you think it is related to the drivers of the sound card. I really like that MIDI device and want it to be my default MIDI device. The system that I'm using is:
Pentium 4 - .7 GHz
256 MB RAM
Windows XP Service Pack 2
The sound card is:
Sound Blaster Li've! 5.
Thank you. -
My phone has been disabled, how can I enable it back?
my phone has been disabled, how can I enable it back?
Yes it does. Also, if you were using iOS 7+ and had Find my iPhone activated, you will need your apple id and password to be able to use the phone again.
-
I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?
How do you disabled it if running the same?
-
Scroll bar does not appear in some PDF files. How can I enable it?
Scroll bar does not appear in some PDF files. How can I enable it?
Scroll bars are supposed to appear when needed.
For example, scroll bars will appear when you zoom in on a page.
FAQ: How to zoom in/out on a page
Windows 8 automatically hides scroll bars after a few seconds of inactivity. Scroll bars will reappear when you touch the screen and move your finger (on a Touch-enabled device) or move your mouse.
Additionally, page navigation depends on the view mode (Single Page vs. Continuous Page).
In the Single Page mode, you can swipe left/right (horizontally) or click the left/right arrow button with your mouse to go to the previous/next page.
In the Continuous Page mode, you can swipe or scroll up/down (vertically) to go to the previous/next page. -
How can I enable Texture filters on a 16 bit file in Photoshop CC?
I am trying to use the texture filters in Photoshop CC and when I try to open them on a 16 bit file the texture category is grayed out. I have a method from a Peachpit article by Helen Bradley that uses texture filters to apply a border around an image. How can I enable texture filters?
If you are talking about the Filter Gallery, you can't use that on 16 bit files. What you can do is duplicate the current 16 bit file and convert to 8 bit, run the various filters to get the border around you image than take the border from the 8 bit file and copy/paste it back into the 16 bit file...
-
HT4623 how can i connect my wifi to my iphone?
i have my wifi plugged into my computer, as well as my iphone. why wont my iphone recognize the wifi? how can i get the wifi to work on my iphone?
- go to settings>wifi
- turn wifi on
- underneath "choose a network" select your wifi
- enter password
- tap join
Maybe you are looking for
-
Exchange iphone 4 for iphone 4S
can I return or exchange iphone 4 16 gb bought at at&t store online for iphone 4s 16 gb at the apple store. But i m still in the contract. I still have a year left of my contract.
-
Upload data from excel to forms 9.0.4 using webutil 1.0.5
Hi, can anybody provide me the code how to upload the data from excel to forms 9.0.4 using ole2 fuction. From forms to excel it is working fine. Regards
-
Backing up using an external hard drive.
So I have this really old and ancient computer that only has a hard drive with less than 20GB. I bought a 500GB external hard drive and plan to put all of my file (pics, music, etc.) type stuff on it and just leave the internal hard drive to house th
-
iphone is disable contact itunes. I downloaded blacklist app. my phone locked and when I would slide to unlock it asked for a password. I never created one. I tried several passwords and they were incorrect. so it disable my phone and gave the messag
-
How to save toolbar state in browser plugin?
How do I get the Reader browser plugin to save the toolbar state? I'm using Adobe Reader XI as a browser plugin in Firefox. I've set it to disable Read mode by default. I like to have several tools at my disposal, so I right click the toolbar and sho