How can I enable the Special Stock Indicator in the source list?

Hello Gurus,
How can I enable the Special Stock Indicator in the source list? This can be found in the Maintain source list detail screen, source group and beside the order unit. Even I am in the create or in change mode, still the indicator can't change
Thanks!

OSS note 668764 explains that the special stock indicator field is a display only field and cannot be changed in the source list. it is only taken over from a scheduling agreement.

Similar Messages

  • Special stock indicator in the OD (goods movement  data tab)

    Hello SAP Experts,
    I would like to ask on how the special stock type indicator field (LIPS-SOBKZ) in the outbound deliveries, under the goods movement data tab, can be populated? For example, with stock type indicator E.
    Are there any configs or master data settings that allow the population of the stock type in the ODs? I'm just wondering why we have some ODs (replenishment deliveries) that are having the special stock indicator E, but sometimes, this field is empty. I would like to know what are the factors that allow the special stock type indicator field to be populated.
    Thanks in advance!

    On the SD side, the special stock indicator on a delivery line item is copied from the sales order line item.
    And the special stock indicator on the sales order line item is determined from the item category.
    If you are referring to the MM side of things, (and based on your description of the use of the 'replenishment deliveries you might be), then there probably are corresponding configuration on the MM side of things.
    Matthew
    +1 (707) 276-6473

  • Special stock indicator for the sales order (VBAP-SOBKZ=)

    Dear All,
    I am getting a warning message while making an initial entry of stock with Mov.Typ : 561 and Special Stock Indicator (E), i.e., "The special stock indicator for the sales order (VBAP-SOBKZ=)is different from the special stock indicator in the goods movement.
    The system is allowing to post the initial entry of goods but when I am trying to do a PGI, it is throwing an error saying that, deficit of stock in the specific storage location.
    Can anybody help me out with this problem ?
    Reward points shall be awarded.
    Rgds,
    Indrajit Dey

    Hi Indrajit,
    Please post the stock with Special Stock Indicator (E), and againest sales order and item.
    Go to MB1C transaction enter Movement type,Plant and special stock indicator E.
    After that you enter Sales order Number and Item then save the document.
    Noe you try to do PGI,
    I hope it will help you,
    Regards,
    Murali.

  • HT1212 how can I enable my old iPhone 3 without the passcode

    how can I enable my old iphone 3 without the passcode

    Follow the directions here to force the phone into recovery mode & restore it:
    http://support.apple.com/kb/HT1808

  • Add New value to the special reference indicator on the TO field

    Can you please tell me how to add a new value to the special reference indicator dropdown which is on the transfer order. 
    LTAK->SPEZI  ?  Currently it is displaying values  A & B in the drop down and want to add a new value to the indicator.
    Thanks
    John

    Hi,
    I dont think you will be able to add more values to this field from configuration.
    If you check the data element and domain associated with this field (LTAK_SPEZI) in SE11. You can see that the value range for the domain has been defined there as  A and B only.
    So if you want to add a new value you can ask and ABAP/technical consulatnt to add new values to this Domain.
    However i am not sure it will be useful (unless you have a specific requirement and want to modify the standard programs) as the field is checked in different program (eg in inculde  LL03AF4V , LL03AF7F ) against these fixed values A and B.

  • How can we enable multiple people to work on the same Xcelsius file

    I want to enable multiple people work on the same file as I am working on. How Can I achieve this task?

    Hi Jain,
    I dont think there is a logic behind your requirement.  If multiple persons are allowed to work on one file, then whose modification has to get saved as a final copy.  Even in MS office documents also, you will be notified/prompted if you are opening at the same time some one else is already working on the same.  Please clarify your requirement more.
    If i presume that if you are talking about the Xcelsius output file such as word, pdf, etc.,. then it is clear that all can open the same file in read only mode except the one who is opening the same First.  Anyhow they cannot modify the SWF contents.  Only header or footer can be inserted.
    Hope this is clear.  Please revert on your exact requirement.
    With best wishes
    BaaRaa.

  • How can I enable my copy of Aperture on the App Store?

    Here is my issue:
    I purchased Aperture 2 for $299, later I paid $99 for the upgrade (DMG download) to Aperture 3. I just got a Macbook Air and I would love to be able to just use the App to install all my apps. Right now I would have to use my Aperture two disk (which I don't have a DVD drive anymore) then find the Aperture 3, download and upgrade.
    Can Apple please give me a redeem code to get the App Store version of Aperture for free? It seems pretty fair, right?
    Thank you!

    Download the Aperture Trial version - you can unlock it with your Aperture 3 + Aperture 2 serial number:
    Hopefully this mirror download link still works:
    http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
    Regards
    Léonie

  • How can I "enable" RealPlayer to record videos from the internet?

    as above can't really add any more info.

    Real Player support is here. <br />
    https://realnetworks.zendesk.com/home

  • Work Order  - Update special stock indicator in components tab

    Hi ,
    The requirement is to update the special stock indicator in the components tab of work order based on material number. I tried using the BADI Workorder_update but there was no changing parameter in it and hence it did not work, I also tried using the field symbol option to explicitly change the value but that too failed since it went to short dump prompting that a protected field is being changed.
    I am thinking of calling a custom function module at last and updating the value, but for the orders which are being created newly the BADI / user exits contains the temporary number . How could I get the Order number and update the indicator for those orders.
    Regards,
    Prabaharan.G

    I used the EXIT_SAPLCOMK_014 to accomplish this.
    Regards,
    Prabaharan.G

  • CO07 and special stock indicator for components

    Hello,
    My final purpose is to be able to call components from project stock in production orders without header material, created in CO07.
    I notice a strange behavior and would be glad to recieve some explanations.
    Production orders are assigned to a WBS. If I indicate the WBS in the CO07 selection screen, the special stock indicator for the components is determined as expected:
    If view MRP 4 for the component says "Individual requirements" then special stock indicator is set to "Project stock"
    If view MRP 4 for the component says "Collective requirements" then special stock indicator is set to "Common stock"
    Second scenario is that I don't provide the WBS in the CO07 selection screen, but provide it in the assignment tab later. In this case, the special stock indicator for components will always be empty (common stock) by default, without any possibility to modify this manually.
    Is anybody able to explain me why?
    Merry Christmas to all.

    Hi!
    Actually it is not related to SAP Manufacuting Execution solution - so you'd rather re-post the question to ERP-related forum. This can help you find a proper one.
    Regards,
    Sergiy

  • Special stock indicator Q in delivery

    Hello friends,
    Could any one explain me what is the relation ship between the special stock indicator in the outbound delivery and individual/col requirement in the Materila Master MRP-4 view.
    Recently when i created the returned PO with account assignment catagory Q, delivery and GR in the supplying plant , but when i try to do the PGR in the receiving plant its throwing the error message Special stock indicator Q is not supported.
    we noticed that in the material master MRP-4 view the individual /col requirement is blank at the time of PO, because of this special stock indicator is fetching in the outbound delivery . when we changed the individual/ col req to 2 and created the same scenario it allowing to do the PGR in the receving oplant and the special stock indicator is not fetching in the out bound delivery .

    Hello
    Refer following links for reference:
    - Posting not allowed for mvt type 643 Q ??
    - Error: M7 146 Special stock E not supported"
    Thanks & Regards
    JP

  • Change component level special stock indicator for Purchase Ord-through CIF

    Hai,
    my requirement is to change the the spoecial stock indicator at the component level for the PO .
    The purchase reqqusition is available in APO system.At the time converiosn to PO, the PO will get created in R/3 through CIF.
    When the Purchase Order is getting saved in R/3 then I need to check the component level Special stock indicator(SOBKZ) & I need change its value.
    I am currently using the user exit 'EXIT_SAPLCPUR_001' to change the same.in this user exit, I am changing the component level SOBKZ in the table IT_INPUT & I am also setting X in IT_INPUTX table.
    But the changes are not reflecting in the newly created PO.It always shows the value 'E' for SOBKZ.
    can any one tell me is this the right user exit to change the above value? if yes please expalin me in rdetail on how to change this.
    Thanks,
    Bhaskar.

    Hai Saurabh,
    I have tried changing the CP_POSITION-SOBKZ field in the user exit EXIT_SAPLMEPI_006.This one changes the SOBKZ of the item of PO i.e, the change reflects in EKPO table.
    What I am looking for is to change the Component level SOBKZ of the ITEM of the PO.The change reflects in RESB-sobkz table.
    I think,  In the User exit EXIT_SAPLCPUR_001, the field IT_INPUT-SP_STK_IND is meant for this.But this is not working.
    Please inform me how the RESB-SOBKZ can be changed?
    Thanks,
    Bhaskar

  • Special Stock Indicator (SOBZK) and Inventory Extractors

    I have activated business Business Content for the Inventory Management (0IC_C03) cube with Grouping as In DataFlow Before and Afterwards.  However, the special stock indicator field which is part of the extractor and not hidden does not come across into the Transfer Structure, is there a reason and how can I resolve? Thanks
    I have gone to the DataSource/Trans Struc tab, have seen in the Data Source and am able to transfer across
    Message was edited by: Niten Shah

    Hi
    In the Standard Sytem these are the special Stock Indicators
    E     Orders on hand
    K     Consignment (vendor)
    M     Ret.trans.pkg vendor
    O     Parts prov. vendor
    P     Pipeline material
    Q     Project stock
    V     Ret. pkg w. customer
    W     Consignment (cust.)
    Y     Shipping unit (whse)
    I have not found B - Special Stock indicator.
    You can use Accotunt assignment Category D  - with Special Stock Indicator E to get the Material into Stock Under Sales Order Stock..
    Item Category S - Third Party is used only in case of Third Party Process & athe Account assignment Category Picked is X - All aux.acct.assgts.
    Thanks & Regards
    Kishore
    Thanks & Regards
    Kishore

  • Special Stock indicator Setting in SD

    Hi all,
    I had created the normal delivery Sales Order. But when i'm trying to make delivery against the Sales Order. It gaves me error, Coz some how the Delivery item have Special Stock indicator set to 'E'.
    from where i can remove this setting.
    Pls note I had Checked the SO Item Category, Schedule line, Account assignment cateogry and the Delivery item Category, but couldnt trace out this Setting.
    If any one knew about it, then let me know.
    Regards,
    S Anand.

    Dear Sheo singh
    Special stock indicator is set only in Item category with regard to SD that is in VOV7
    You can also check in the requirement class details in OVZG
    For this you need to find out what is requirement type maintained in your sales order in VA02 procuremet tab
    In OVZH you need to see what is the requirement class assigned to your  requirement type
    In OVZG for your requirement class details you can see whether any special stock indicator is maintained
    But here also the value flows from what is maintained in VOV7
    Hope this information helps you
    Regards
    Raja

  • Special stock indicator in production order

    Hi,
    We have a new business scenario from sales department.
    For example, A is a MTO item, it has component B & C. Now there is a sales order for A come in, and system create a production order, but there is no enough stock for B. They want to:
    1, Allocate C to the production order and other production order or sales order can not take it away via V_V2 or MRP run.
    2. Create another seperate purchase order for B and want this purchase order also allocate to this production order.
    3. They do not want to use WIP stock because it is difficult to display WIP stock in SAP you know.
    I trying to use the special stock indicator "E" for components in production order, and I move C to custom stock via 412 E with no issue.
    But when I create a purchase order for B with account assignment "F",  it goes to normal stock in MD04. After I post GR for the purchase order, the quantity goes to production order directly, does not show in MD04 and did not reduce the requirement quantity.
    If I create a purchase order for B with account assignment "E", it gives an error message "Sales document item is not defined for the transaction. I tried to change the requirement type from "KMFA" to "KE" in the sales order for A, and the production order disappeared, it is not accepted.
    How should I define and configure the process?
    Thank you so much.
    Albert

    Hi Albert
    I suggest you to take a look on the setting "individuall/collective" on the tab MRP4 of the material master.
    For both components, you should set the value 1 and system will always plan the components under the sales order special stock.
    BR
    Caetano

Maybe you are looking for