How can I enter a reminder at the top of the list?

I want to enter reminders at the top not the bottom. I waste a lot of time scrolling down to the bottom everytime to enter a new one.
I also want to view my most recent reminders at the top not the bottom. I couldn't find anything in preferences or elsewhere. Any ideas?

I found that view options allows me to view from the most recent at the top.
But I still can't enter at the top.

Similar Messages

  • HT1212 I just updated my Ipad 2 to IOS7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. I tried using the OIS7 passcode I use on my Iphone  and it did not work and now my Ipad is disabled

    I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I  tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode

    I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
    I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring.

  • How can I put a vertical menu ON TOP OF the background image?

    I've taken a screenshot to describe my problem.
    http://i48.tinypic.com/10ndeg4.jpg
    I want to put the menu on top of the background image. Compare it to placing another image on top of the background image. HOW on earth can I do this?

    Did you try putting the image in a <div> and setting the background image for the <div> with CSS.  Then within the <div> place your menu.
    Just a thought.
    LJD

  • How can I see my email attachments on top of the mail rather than bottom of the email

    Hi,
    I always see the attachments in the bottom of my email where it becomes difficult to scroll down to look to the attachment. Sometimes it gets wired if the mail is long.
    I am also using Android where the attachment is viewed at top and same was the case of Blackberry. How could Apple miss it?

    In the iPhone mail app attachments are listed at the bottom and that cannot be changed

  • How can i remove iTunes 10.1.0.54 saying the feature you are trying to use is on a network resource...enter an alternate path to a folder contaning the installation package 'iTunes.msi'?

    How can i remove iTunes 10.1.0.54 saying the feature you are trying to use is on a network resource...enter an alternate path to a folder contaning the installation package 'iTunes.msi'?
    < Edited by Host >

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

  • How can I enter data in an input schedule on a member in the EPM Add-On that is not a base member?

    Hello, all,
    how can I enter data in an input schedule on a member in the EPM Add-On that is not a base member?
    E.g. I want to implement a top-down-planning scenario and I have the following hierarchy:
    Europe
         Germany
         France
         UK
         Spain
         Italy
    How can I enter a value on Europe in an input schedule in order to allocate this value afterwards?
    Thanks in advance and best regards
    Gerd

    Gerd,
    It should be something like below -
    EuropeInput
    Europe
         Germany
         France
         UK
         Spain
         Italy
    EuropeInput shall be kept out of hierarchy and should be a base level member. Users will enter the numbers in this member. In your script logic, you will make use of this member to allocate the data in Bas(Europe) i.e. Germany, France, etc.
    Effectively, after allocation the same data will be rolled up to Europe.
    Many top-down planning would use such work-around as BPC doesn't allow writing to parent node.
    Regards,
    Ashish

  • My ipad has gone in lost mode by mistake and now i have it and i enter the password and i cant enter my ipad how can i enter or restart the ipad and start back over new

    my ipad has gone in lost mode by mistake and now i have it and i enter the password and i cant enter my ipad how can i enter or restart the ipad and start back over new

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Hi I lost the ICloud password and the mail address for it is freezing by the hostage ( hotmail ) so how can I enter my ICloud Account

    Hi
    I lost the ICloud password and the mail address for it is freezing by the hostage ( hotmail ) so how can I enter my ICloud Account

    Hello Cheif Auditor,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Apple ID: If you forget your password
    http://support.apple.com/kb/ht5787
    Best of luck,
    Mario

  • My display says iPod is disabled connect to iTunes. When I connect to iTunes, a prompt displays stating that the iPod is protected by a passcode. How can I enter the passcode if the iPod is disavled?

    My display says iPod is disabled connect to iTunes. When I connect to iTunes, a prompt displays stating that the iPod is protected by a passcode. How can I enter the passcode if the iPod is disabled?

    THis page directly addressed the problem of the persistent "connect to iTunes" screen and passcode issue:
    http://support.apple.com/kb/HT1808

  • HT1212 It says could not connect to the ipod because it is locked with a passcode. You must enter our passcode on the ipod before it can be used with Itunes. I forgot the passcode so how can I enter/ restore/reset it?

    It says could not connect to the ipod because it is locked with a passcode. You must enter our passcode on the ipod before it can be used with Itunes. I forgot the passcode so how can I enter/ restore/reset it?

    As the linked articl says, place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up      
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

  • Hi I am bharath I am using Httpfox..How can I enter the URL manually insedi of Httpfox window?

    I want to enter one server URL and want to see the headers and all what are requirments for that serevr. How can I enter that server URL inside of the Httpfox? Thanks in advance

    hello, i think that extension is just recording/logging the headers as you are browsing along in the browser - so i think you just have to open httpfox and enter the address you want to inspect in the firefox address bar.
    if you have more detailed questions about extensions, please contact the developers of the extension themselves or use the support channels they provide, since they can give you far more detailed guidance.
    eidt: i think firefox also offers the same functionality inbuilt in the net section of the webconsole in tools > web-developer, [https://developer.mozilla.org/en/Using_the_Web_Console]

  • My ipod is rejecting the correct screen lock to unlock the ipod.  I have restored it but it is still asking for a passcode. How can I enter my ipod?

    My ipod is rejecting the correct screen lock to unlock the ipod.  I have restored it but it is still asking for a passcode. How can I enter my ipod? Is there a way to restore it so i can start over?

    Place your device into recovery mode and then restore.
    See here:
    http://support.apple.com/kb/HT1808
    Also set your iPod up as a new device, rather that restoring from a previous backup.
    Note: All user content on the device will be erased.

  • I changed the id and password for iTunes and app store. login fine for tunes. app store downloads id is incorrect and grayed out. how can i enter correct id?

    i changed the id and password for iTunes and app store. login fine for tunes. app store downloads id is incorrect and grayed out. how can i enter correct id?

    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with another Apple ID with a new Apple ID.

  • Ichanged the id and password for iTunes and app store. login fine for tubes. app store downloads id is incorrect and grayed out. how can i enter correct id?

    i changed the id and password for iTunes and app store. login fine for tubes. app store downloads id is incorrect and grayed out. how can i enter correct id?

    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with another Apple ID with a new Apple ID.

  • How can I pass multiple condition in where clause with the join table?

    Hi:
    I need to collect several inputs at run time, and query the record according to the input.
    How can I pass multiple conditions in where clause with the join table?
    Thanks in advance for any help.
    Regards,
    TD

    If you are using SQL-Plus or Reports you can use lexical parameters like:
    SELECT * FROM emp &condition;
    When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
    SELECT &columns FROM &tables &condition;
    But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
    Best of luck!

Maybe you are looking for