How can I enter "Flate rates for travel costs" with more than 2 decimals?

Hi expert,
I want to enter flat rates for travel costs in table T706F.
I have a figure with more than 2 decimals (0,066), but I cannot save it, because only 2 decimals are allowed for EUR.
I don't want to change the decimals for this currency.
I found OSS note 446116 which is release independent. It is a note of 30.10.2001.
It suggests to create a new currency e.g. EUR3 and enter translation ratio's and exchange rates.
This seems pretty drastic.
Do you know if there is another way to handle this issue?
Thank you.
Kind regards,
Linda Verding

Hello Christian,
I have checked it with consultants from SAP Brussels.
They confirm that OSS note 446116 can be used to create flat rates for travel costs with more than 2 decimals.
I will create a new currency (EUR3) with the description "for travel expenses only".
Kind regards,
Linda Verding

Similar Messages

Define Flat Rate for Travel Cost based on location (Maximum points awarded)

Hello,
SPRO>Financial Accounting>Travel Management>Travel Expenses>Trip Reimbursement Amount>Reimbursement Amount Travel Costs>Define Flat rates for Travel Costs, in this path we can enter the reimbursement amount for trip country/ trip region. I created different reimbursement amounts for different locations(additional locations/regions can be created in table T702o for country US) for USA but in expense report its taking only default amount (0.36) that is already there for Country:US not the amount i gave (0.27) for different location even when I gave the location name in the expense report. Could anyone tell me what i am missing. Do i have create corresponding WT for these expense types based on location.
Thanks,
Latha

got solved

Is an update of "Flat rate for travel costs " possible by company code?

Hi,
I want to update the reimbursement amount in SPRO in "Flat rate for travel costs "
I need to select a "Trip provision variant: e.g. Belgian accounting".
Can it be selected by Company Code as well?
Thank you for providing your feedback.
Kind regards,
Linda

I close this call.

How can I use bridge to create web galleries with more than 10 images?

I am new to building web galleris for my website. When i try to load more than 10 images in a gallery , Bridge cuts off all images beyond 10. I am confident that I can do this if i can find the right settings

I am not at my PS computer right now, but I think the Preview only shows 10 images (for speed) but they will all be there in the final output.

How can I purchase FormsCentral premium for my organzation with a purchase order?

How can I purchase FormsCentral premium for my organzation with a purchase order?

Hi;
A FormsCentral subscription purchase requires a credit card in one of the supported countries for purchase. It cannot be purchased using a purchase order, only a credit card.
Thanks,
Josh

How can I get a E3000 or E4200 to manage more than 5 devices

How can I get a E3000 or E4200 to manage more than 5 devices? Come on Cisco, lets get real. EVERYONE has more than 5 devices to manage. The average family of 4 has 3 or 4 computers, 4 smart phones and at least a couple of tablets and maybe some TV or game consoles. Setting access control policies is a must for anyone who is a parent.
Does anyone know of a good router that has a reasonable set of access control features? I've always loved Cisco up to this point, but I'm frustrated by this significant limitation.

Fuggedaboutit. Cisco apparently has retreated from the more advanced Internet Access Policy (IAP) to leave users with their paltry Parental Controls (PC) instead. For example the E4200v1 had IAP+PC, and the E4200v2 has only PC.
And good luck trying to find a E4200v1. I spent the last week, ordered 3 of them from different sources, and every one of them was a V2 inside of a V1 box, even the last one I ordered directly from Linksys!
That's a very bizarre marketing scam they're pulling there. The sad thing is that I actually want to keep using their product line, but they are doing their best to push me away.
I too am now regrouping and looking for a competitor who does 2 things well:
(A) High performing dual-band wireless access point, w/ pswd-protected guest-mode
(B) Reliable & fairly full-featured Internet access control (parental control)
My basic requirements for "B" are:
(1) Allow restrictions by IP or better yet MAC address (Cisco PC's hostname list didn't work for me)
(2) Device list of at least 12 devices (obviously family size varies but Cisco's 5 is a joke)
(3) Restricty by days of week and time of day (hourly or half-hourly would be nice)
(4) Restrict by URL's and keywords, at least 12 per device or policy/rule
I wonder if there's a home router whose stock OS, meets these requirements. Otherwise I may have to look into using DD-WRT or similar.

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

I would like to know how can I delete emails from my email block have more than 8000? Thank you.

I would like to know how can I delete emails from my email block have more than 8000? Thank you.

I want to say, delete the 8000 not one by one, or 50 in 50... Minimum of 200 by
200

How can I set up my mail page to show more than ten emails at a time?

How can I set up my mail page to show more than ten emails a time?
== This happened ==
Every time Firefox opened
== I first started using firefox

There doesn't seem to be a setting in preferences to how many emails I can view at one time.

Can you sync an ipod nano 5th gen with more than one computer

Can you sync an Ipod nano 5th generations with more than one computer. One is a Dell with xp operating system and the other is an Mac laptop.

It is possible to sync your iPod with multiple computers, but syncing with different platforms is not supported by Apple. See this article for more details on how to get this set up.
http://support.apple.com/kb/HT1202
B-rock

How can you create an activity as subsequent act. of more than one activity

Hi.
I want to create an activity as subsequent activity of more than one activity.
I am using FM CRMXIF_ORDER_SAVE, but if I write data structure CRMXIF_DOC_FLOW with more than one item the system shows the error CRM_COPY 010 More than one predecessor was entered for data transfer.
However I have customized multiple relationship allowed, and if I do multiples links in transaction crmd_order it works all right.
Only it doesn't work with FM CRMXIF_ORDER_SAVE. I need create activities with FM because they are interface R/3. What FM can I use to create multiple subsequent activities?
Thanks and best Regards
Sorry for my english.

Hi,
I have got some activities creates in the system. (e.g. Act. 1, Act. 2, Act. 3 and Act. 4). With the FM CRMXIF_ORDER_SAVE filled the structure CRMXIF_DOC_FLOW you can create subsequence activity of one of them (e.g. Act. X.1). I need create the same activity (Act X.1) from another activity, (e.g. Act. 2). I know to do this in transaction CRMD_ORDER by link tab. But I don't know how to do this using FM or BADI or another thing.
Act. 1 Act. 2 Act. 3 Act. 4
.....Act. X.1
Thanks in advance.
Edited by: Ana Isabel París on Jul 7, 2008 2:42 PM

How to create a workbook in BI 7.0 with more than 15 Sheets?

Hi Experts,
i would like to know how to create a workbook with more than 15 Sheets.
One Workbook should be based on one query and the other on differents queries.
How should be the authorization? If you have any documents please just send it to me.
Cheers
G

HI
Execute one report save it in the workbook, then you can goto the tools and click insert query, like that you can add how many queries you want. then right click on the reports goto properties there in the interface tab click the check button for refrsh all the queries. finally save it with the option save existing wrokbook(beacause you already save the first query in the workbook)
Regards,
chandra.

How do you get the integer of a number with more than 10 digits

I can't seem to be able to get the integer of a number with more than 10 digits.
ex:
integer(12345678901.3) returns -539222987 when it should really return 12345678901
Thanks for the help
(I'm on director 11 at the moment)

You can write a Parent script to represent Big Integers. I wrote some code to get you started. It consist of two classes - "BigInt" and "Digit". At this point you can only add two "BigInts" and print out the value with a toString() function. Note that you pass a String to the "BigInt" constructor.
In the message window you could enter something like:
x = script("BigInt").new("999999999999")
y = script("BigInt").new("100000000000000000004")
z = x.add(y)
put z.toString()
And the output window will show:
-- "100000001000000000003"
Here are the two Parent scripts / Classes
-- Digit
property val
property next
on new me, anInt
val = anInt
next = 0
return me
end new
-- BigInt
property Num
property StringRep
on new me, aString
Num = script("Digit").new(Integer(aString.char[aString.length]))
curNum = Num
repeat with pos = aString.length - 1 down to 1
    curNum.next = script("Digit").new(Integer(aString.char[pos]))
    curNum = curNum.next
end repeat
return me
end new
on add me , Num2
curNum = Num
curNum2 = Num2.Num
result = curNum.val + curNum2.val
if result > 9 then
    carry = 1
else
    carry = 0
end if
result = result mod 10
sum = script("Digit").new(result)
curSum = sum
curNum = curNum.next
curNum2 = curNum2.next
repeat while curNum.ObjectP AND curNum2.ObjectP
    result = curNum.val + curNum2.val + carry
    if result > 9 then
      carry = 1
    else
      carry = 0
    end if
    result = result mod 10
    curSum.next = script("Digit").new(result)
    curSum = curSum.next
    curNum = curNum.next
    curNum2 = curNum2.next
end repeat
repeat while curNum.ObjectP
    result = curNum.val + carry
    if result > 9 then
      carry = 1
    else
      carry = 0
    end if
    result = result mod 10
    curSum.next = script("Digit").new(result)
    curSum = curSum.next
    curNum = curNum.next
end repeat
repeat while curNum2.ObjectP
    result = curNum2.val + carry
    if result > 9 then
      carry = 1
    else
      carry = 0
    end if
    result = result mod 10
    curSum.next = script("Digit").new(result)
    curSum = curSum.next
    curNum2 = curNum2.next
end repeat
StringRep = ""
me.makeString(sum)
return me.script.new(StringRep)
end add
on toString me
StringRep = ""
me.makeString(Num)
return StringRep
end toString
on makeString me, digit
if not digit then
    return
end if
me.makeString(digit.next)
put String(digit.val) after StringRep
end makeString

Support for file extensions with more than three characters when saving - I want my FLAC!

Why does the Wave Editor still drop characters from filenames with more than three character extensions when you save a file? But since -opening- a FLAC file with an extension of ".flac" doesn't get chopped to ".fla", why does Audition still chop off the extra character when -saving-?
It gets old quickly when you have to save, close and reopen files in order to get Audition's Multitrack editor to play nice and be able to find files when you reopen the Session.
Given that the FLAC filter is open source, I may just have to modify the code and recompile it to force a save to ".fla"... But of course, ".fla" is a Flash file extension, which I also use, so that is a crude hack for me.

Hi bro...
use in BYTE mode in place of in TEXT mode. and at the end of each line give some special charactor so as to distinguish between lines.This is effected by unicode check too
regards
Edited by: Mohit Kumar on Feb 9, 2009 9:44 AM

How can I add a date picker in Word for Mac 2008 with more than 25 items? I need to select calendar days so I need 31 items.

I am building a form for customers to complete. I want them to be able to click on a pull down menu and select the day of the month 1-31. The drop down form field only allows 25 entries. How can I get 31 entries? I'm on a Macbook Pro running Mountain Lion.

Hello,
This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

How can I enter "Flate rates for travel costs" with more than 2 decimals?

Similar Messages

Maybe you are looking for