How can I establish bluetooth connection with my iPhone so I can share and modify my iPhone's contact list on my macbook?

How can I establish bluetooth connection with my iPhone so I can share and modify my iPhone's contact list on my macbook?

The Mac and iPhone sync with iTunes though the charge cable that is included with the iPhone. Through this, you can sync your calendars and contacts.
Bluetooth is an impractical sync scheme as the time it would take to say transfer your song catalog could be longer than your phone contract. I suppose it is entirely possible to implement with hacks and jailbreaking, but I am fairly sure it is beyond the rules here to discuss such activities.
You may wan tto ask this same question in the iPhone section of the comminitie here. There may be some workarounds for just contacts.

Similar Messages

  • Firefox says it can't establish a connection with any website I try I uninstalled and reinstalled it and get the same message

    firefox says it can't establish a connection with any website I try. I uninstalled and reinstalled it and get the same message .tryed running it with the addons diabled that didn't work. so I uninstalled it again this time uninstalling all the settings and addons too. reinstalled it and got the same message.

    See:
    * http://kb.mozillazine.org/Error_loading_websites

  • I cannot open my Yahoo Mail but everything else is OK.  When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page.  Safari can not establish secure connection with Yahoo Mail.

    I cannot open my Yahoo Mail but everything else is OK.  When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page.  Safari can not establish secure connection with Yahoo Mail.

    It sounds as though a script on the site, or an advertisement, is not working quite right...
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove the site's cookies using either of these. Save any pending work first.
    While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?

  • Can not establish a connection with SQL

    hey all,
    i was trying to start with JDBC ,but i spent two days trying to establish a connection with SQL.
    can anybody help me please, the problem is about the url string and driver name.
    am completely lost with these stuff :(
    thnx in advance,

    stillAbeginner wrote:
    am using Microsoft SQL server 2005, but i don`t know how to get or setup driver correctly.
    please explain how.
    Are you specifically using "localhost" as the server name and thus the database is on your client box? If not then SQL Server must be configured to accept such traffic before it will work.
    Other than that the most common problems are
    1. The port is wrong. It is either 1433 or 1434.
    2. The server name(or IP) is not visible from client computer. Nothing you do in java nor MS SQL Server will fix this.
    Printing the stack trace and posting it here provides more information for us to help.

  • Treo Pro: After establishing Bluetooth connection with laptop, can't connect to P.A.N. Windows XP Pro

    I am able to setup a Bluetooth partner ship between my Treo Pro and my laptop without much difficulty.  However when I try to establish a PAN connection via My Network Connections, I receive the following Windows error message:
    The connection with the Bluetooth network device failed.  The device may already be connected to another computer, or it may need to be configured to accept connections from this computer.  Consult your device documentation for further information.
    Any assistance with this matter would be much appreciated.
    Post relates to: Treo 750 (AT&T)

    No, that is not what I am referring too.  I am way ahead of you there.  I can pair my phone to my computer without any difficulties.  My computer sees my phone and my phone sees my computer.  Here is the route I am referring too; control panel, bluetooth devices, single click on paired Treo Pro, properties button, new window second tab (services), blank screen and no ability to add services.  Very similar on the phone itself.  For instance, when paired with my Plantronics headset, which by the way is not on the list, but works perfectly, the services box lists "hands free".  When connected to the the computer, one of the services should be PAN connection.
    Post relates to: Treo Pro T850 (Sprint)

  • Can't establish internet connection with NAT network in Oracle virtualbox

    Hi all,
    I am new to Oracle virtualbox. I have created a new virtual machine with Oracle linux 5.5 (64bit). I have enabled the NAT networking adaptor so as to access internet connection from the VM. But I am not able to do so.
    Here are the network settings in the VM
    1. Automatically obtain IP address settings with DHCP
    2. Firewalls are disabled.
    The 'eth0' device shows active status. The #ifconfig command lists "inet address" as 10.0.2.15.
    Please let me know if any additional configuration is required for establishing the internet connection in the VM.

    The NAT engine of Virtualbox automatically provides a router between the network interface of your host system and the virtual network interface of your guest OS and offers the same DNS servers to the guest that are configured on the host.
    For more information how it works, see http://www.virtualbox.org/manual/ch06.html#network_nat.
    The problem you are experiencing is most likely with the network configuration of your host system.

  • Can't establish internet connection with Ethernet/Thunderbolt adapter.

    Hello,
    Ever since I update to OS X Mavericks, I can not connect to the internet on my iMac Pro Retina 15-inch.  I had to purchase the Ethernet to Thunderbolt adapter because the iMac pro Retina does not come with an Ethernet connection port.  When I first purchased the Laptop, I connected to the internet automatically.  However, now I keeps getting a message that the cable is not plugged in.  I did hook the Ethernet cable to a Windows laptop and it connected right a way.  So I'm positive it's the cable from router to computer is working.  Also, the Thunderbolt port is active because I plugged a external HD into it and it mounted.  The ability not to hook up to the internet is baffling.  I have a Motorola cable modem, connected to Linksys router.  I have two computers and one printer plugged into the router.  That leaves me one Ethernet Port.  When I hook up my iMac Pro Laptop using the Ethernet to Thunderbolt adapter, nothing happens.  I'm not connecting to internet.
    Any ideas, will be greatly appreciated.
    Dennis

    Thanks everyone for your help and comments!
    However, I still had to call tech support to solve the issue so I wanted to get back to everyone with the solution.
    First, it had nothing to do with Mavericks!  Basically, it was a case of IP addresses being assigned by my modem and router.  We first re-booted the modem and router and got the macbook pro to finally recognized an etherport connection.  However, it wouldn't assign the IP address to the etherport, that's because I didn't click the apply button.  Once I did that, the macbook pro was working on ethernet, but I lost WI-FI on the macbook.  Ugh!  Also, my iMac desktop lost ethernet port and stop working.  So, I used the network assist me on the desktop and got to the point where it wanted me to reset everything again.  So, I unplugged the modem and router, waited 45 secs, then powered up the modem and then powered up the router.  Everything is work Great.  The desktop, macbook pro (both ethernet and wi-fi), my wife's PC Laptop and our network printer!  Therefore, the solution in my case was to restart modem and router twice to get all the computers assigned the correct IP address.  I hope this helps someone out there!
    Thanks again everyone for your comments ... very much appreciated!
    Dennis

  • Can I establish WLAN connection with Satellite A20?

    Just bought a new desktop pc and philips ADSL wireless base station. Software running OK on both desktop and laptop but can not logon from laptop without cable being attached. Does anyone know if the A20 should do and if so how to fix / setup?
    And if it doesn't, what do I need to make it so it does? I can not see the WLAN in network or device manager. Got Wireless hotkey in add / remove programs though. (What's this?) Can'e see it in programs list though??
    Help me! Please!!
    Ta. Andy.

    It is not easy to give any precise answer because you have not written which notebook model you have exactly. Anyway I have found follow information:
    Satellite A20-S103 is WLAN ready
    Satellite A20-S103D is also WLAN ready
    To be sure about WLAN card please check at first bottom side. Every notebook with WLAN card on board (factory configured) has small WLAN sticker. Please check also entries in device manager under Networks adapters. If the WLAN card is not listed there you must buy one.
    You can use one compatible card and put it on the right place or use some external solution like USB or PCMCIA WLAN card.

  • Can not make Bluetooth connection with HP Probook 4530s.

    My HP 4540s does not have a builtin Bluetooth card. I have used an ASUS USB-BT400 Bluetooth 4.0 USB dongle to make the laptop BT capable. My phone (AT&T Z222) can see my laptop and my laptop can see my phone. When I attempt to pair the two, I get a list of options. The first is to let the computer generate a passkey/passcode. The generated number is on the screen for such a short time I can not even readit much less type it in to my phone. The second option is??? The third option is to pair with out a passcode/key (I think they are the same !). When I select this option I was able to send several pictures to my computer. When I tried again to send pictures, the phone asked me for my passkey. I thought that I didn't have one so I selected "pair". The phone asked me to put in a valid passCODE?. I tried 0000 which could not be verified.
    I have been to the AT&T store three times for 2 hours each. I have been on the phone with AT&T for over an hour, I have been on the phone with ZTE (phone manufacturer) for almost 2 hours, and microsoft for 30 minutes.
    Does anyone know what to do? None of these people did. 

    HI,
    My bluetooth on the HP Pros4530s notebook does not turn on. What should I do?

  • Can't establish internet connection with Time Capsule

    I currently have a wireless Linksys router and have switch over to TC.  I've connected my cable modem internet connection to the internet connection of the Time Capsule, however, with the Airport Utility it states that I do not have a valid IP Address.  I've check under the Manual setting for Internet and ensured that the connection says "share a public IP address", but that does not work.  Any ideas?

    Did you remember to completely reset your cable modem and power cycle the network?
    Push the reset button on the modem (if present)
    Power the modem down
    Pull the batttery (if easily accessible)
    Power down every device on the network....order is not important
    Wait at least 15-20 minutes
    Make sure that you have the Ethernet cable from the modem connected to the WAN port (world icon) on the Time Capsule, and re-install the battery if it was pulled in the steps above
    Power up the modem and let it run for 4-5 minutes by itself
    Power up the Time Capsule the same way
    Continue powering up devices one at a time about a minute apart until the network is powered back up
    Check network operation

  • Can't establish infrared connection with 6101 and ...

    As I've recently upgraded my phone I want to store my pictures from the 6101 I am replacing. Eventually, PCSuite will complete the connection setup, but when I go to Store Images and click Select Phone it either doens't list the phone or, if it does, I select it but the ok is not activated so can't proceed - evenutally the phone disappears from the list and I start over... I've also tried copying files and backing up, but the connection always goes. Please help! I've been trying to do this for days! Really don't want to lose my images (pic's of kids, you know).
    Thanks.
    Berta

    Have you tried the file manager in PC Suite ?
    Connect the phone and see it the phone is visible in File Manager ? When you can browse to the right folder (Gallery - Images or memory card depending where you have the images and manuallly move them to PC folder ?

  • Whenever I go to webpages there are a few that come up with: "Unable to connect Firefox can't establish a connection to the server.."? What do I do?

    Whenever I go to some websites there are a few that come up with: "Unable to connect Firefox can't establish a connection to the server.." and the problem occurs with the same websites on other browsers. What might be the problem?

    If you get the same problems with two browsers, the problem is
    outside of them. Check you computer for blocking programs.
    Separate Issue;
    Your System Details shows;
    Installed Plug-ins
    Shockwave Flash 15.0 r0
    Shockwave Flash 16.0 r0
    Having more than one version of a program may cause issues.
    Grab the uninstaller from here:
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
    Then reinstall the latest version.
    Flash Player '''v16.0.0.257 https://www.adobe.com/products/flashplayer/distribution3.html'''
    http://www.ehow.com/how_11385212_troubleshoot-reset-connection-firefox.html
    https://support.mozilla.org/en-US/kb/server-not-found-connection-problem

  • I can not establish a connection to Oracle with an application in win 7

    I have an application in VB6 that connects to an Oracle Database 10g with Oracle native ole db but win7 can not make the connection with a standard user, only makes the connection to a user with administrator permissions. The error that shows the application's rubbish eg @, H, etc.. only rare characters.
    Edited by: gualja on 11/01/2013 04:13 PM

    Did you try adding the user in administrator group and running your programm, even doing so is giving you same error?
    Can you connect to sqlplus as non admin user and fire sql commands
    start>run>sqlplus (if you have more than one installation, run from your oracle_home/bin)
    connect as the non admin user and run sql
    if the "User Account Control is enabled", try disabling

  • Our power suddenly went out and now Firefox can't establish a connection. How do I fix it?

    Our power suddenly went out and when I turned the computer back on and opened Firefox, this is the message I get while trying any web page:
    Unable to connect.
    Firefox can't establish a connection to the server at www.etsy.com.
    * The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    * If you are unable to load any pages, check your computer's network
    connection.
    * If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.

    Maybe the Firefox rules in the firewall got damaged.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.<br />
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
    If that doesn't help then do a clean reinstall.<br />
    Download a fresh copy of Firefox ( http://www.mozilla.com/firefox/all.html ) and do a reinstall of Firefox on top of the current version.<br />
    If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Unable to connect Firefox can't establish a connection to the server at 'URL of the site' why does this appear in all browser??

    I have used these sites
    -www.facebook.com
    -www.dubbedonline.tv/ and some others for a long time but few weeks ago i couldn't access them anymore and this appeared :
    Unable to connect
    Firefox can't establish a connection to the server at www.facebook.com.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    i have also tried many ways to access them but none of the solution worked, one of them was checking troubleshooting problems and it detected that the remote device won't accept the connection, so, how can i fix this?

    You can check the connection settings.
    *Tools > Options > Advanced > Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
    Do a malware check with several malware scanning programs on the Windows computer.
    Please scan with all programs because each program detects different malware.
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Maybe you are looking for

  • Mac pro turns on but screen goes black after a while what could be wrong please help!!!

    Hello mac community, I am new, I updated a program today everything was working fine yesterday and now today I was updating PLAY a music engine program it seems to have caused the mac to go crazy. I also updated VE PRO 5 another music program. Everyt

  • Problem in uploading inforecords through "RM06IBI0"

    Hi experts, I am facing the problem when i amuploading the purchase info record data through the program RM06IBI0 for some records only(randomly). This program is unable to upload the condition records data in the screen SAPMV13A-0201.It is giving th

  • Ipod capacity question???

    I have a 2GB nano but when I go to settings, then about, my capacity is only 1.8GB. Is this how all the ipods are? Dell   Windows XP  

  • Error message: RFC system error for destination GTADIR_SERVER (SGSUB104)

    Hello people, I'm using Sneak Preview SP12 and getting frequently this error, for example when loading some Web Dynpros already in the system, or creating Z tables. If anyone knows how to solve or the cause please help. Procedure for solution in mess

  • Nested table in a subtype

    Hi, A question: Is it possible to have a nested table on a subtype? If yes : How to declare the storage table for the nested table. I will be really grateful for any help here. Nina