How can I estimate the table size?

Hi guys,
how can I estimate tabel size? I have a table, which contains char, numc, string, dec and so on.
And the table will contain about 1 millon data. How much size does this table has?
How can I calculate it? Is there any ABAP command to get it?
Any hint is appreciated!
Regards,
Youyou

Hi
Perhaps this part of statament DESCRIBE TABLE from SAP help can be usefull for you:
DESCRIBE TABLE
Syntax
DESCRIBE TABLE itab [KIND knd] [LINES lin] [OCCURS n].
Extras:
1. ... KIND knd
2. ... LINES lin
3. ... OCCURS n
Effect
This statement determines some properties of the internal table itab and assigns them to the specified variables. The various additions enable you to determine the table type, the number of currently filled rows and the initial memory requirement.
In addition, the system fields sy-tfill and sy-tleng are filled with the current number of table rows and the length of a table row in bytes.
So the system field sy-tleng has the size of a single line in bytes, it should mean the total table size can be calculated multiplying that field for the total of the record of the table:
parameters: p_rec type i.
DATA: T_BSEG TYPE TABLE OF BSEG.
data: size type sy-tleng.
SELECT * UP TO p_rec rows into table t_bseg
FROM bseg where bukrs = 'MAAB'.
describe table t_bseg LINES sy-tabix.
sy-tleng = sy-tleng * sy-tabix.
write: 'Nr. records:', sy-tfill, sy-tabix,
/ 'Nr. bytes:', sy-tleng.
Max

Similar Messages

How can I estimate the final size of my .ipa?

Hello there,
As far as I know there is no "scietific method" to find out how many megabytes will be added to an application after it was uploaded to the Apple Store.
For example, my app in origin was 14.680.351 bytes and just when I've finished to upload it I got this email from the Apple Store:
"Dear developer,
The app binary listed below was 14 MB when you submitted it, but will be 21 MB once processed for the App Store. This exceeds the cellular network download size limit and would require your app to be downloaded over Wi-Fi".
bla bla bla
Obviously seen that the limit is 20 MB I worked a bit on my app and I managed to lower his size to 11.236.336 bytes.
Then I uploaded it again and this time I got no warning.
So in details my app, the firt time was 14.680.351 byes and has a lot of assets (external images, about 700 for 9.1MB in size).
The main swf was about 900K in size.
I have also a database of 1MB in size.
The air runtime I think is about 4MB
The second time the app was 11.236.336 bytes and I resampled the 700 images for a final size of 5.3MB.
The main swf was again about 900K in size.
The database still 1MB in size.
Plus the 4MB of the air runtime.
However, it is obvious that it would be better to know the final size before putting it on the Apple Store, or at least it would be good to estimate it.
So please reply to this thread by posting your experience.
Thanks a lot
P.S. I forgot to mention that I've done all in Flash CS5.5

Hi therabbitwindfall,
I know that apps over 20MB are allowed to be downloaded over wi-fi, however, if I can, i prefeer to make the app available also to 3g.
So, in a nutshell, your equation is:
finalSize = application.ipa size - 4,5MB Compressed Air Runtime + 10MB Uncompressed Air Runtime
I apply it now to my first upload:
finalSize = 14.680.351 bytes - 4.608.000 bytes + 10.240.000 byes = 20312351 byes that is not 21 MB however I do not know exactly the size of the compressed air runtime and the uncompressed one.
mmmh, you can be right, thank you.
Anyone from Adobe can confirm this?

How Can I obtain the tables of one schema and the record size???

How Can I obtain the tables of one schema and the record size???
Example:
TableName Record Size
Tabla1 12500
Tabla2 7800
Tabla3 2046

This is not an OWB question, but you can obtain bda-type information on tables by using the system view dba_tables.
Regards:
Igor

How can I adjust the font size in iTunes 11?

How can I adjust the font size in iTunes 11? Specifically, when in Artist view both the text in the sidebar and the track listing are huge.

How to change fontsize in iTunes
Take an XML-Editor and open:
"C:\Program Files (x86)\iTunes\iTunes.Resources\de.lproj\TextStyles.plist"
For other languages change your country code (de, en, fr, pl ...).
Example for english: "\en.lproj\TextStyles.plist".
Backup this File !!!
To change the Text-Size, change the integer value of the following item:
"<key>size</key>"
"<integer>8</integer>"
This means Text-Size 8
"<key>size</key>"
"<integer>12</integer>"
This means Text-Size 12
To change the font, change the integer value of the following item:
<key>font</key>
<string>Arial</string>
This means the font changes to Arial
This also works:
<key>italic</key>
<true/>
<key>bold</key>
<true/>
<key>underline</key>
<true/>
Example of common Text Properties:

<key>1033</key>
<dict>
        <key>- loc hint -</key>
        <string>item table cell 3</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

<key>1034</key>
<dict>
        <key>- loc hint -</key>
        <string>item table cell 3 (bold)</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>1021</key>
    <dict>
        <key>- loc hint -</key>
        <string>item track list 1</string>
        <key>font</key>
        <string>Segoe UI Semibold</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>1022</key>
    <dict>
        <key>- loc hint -</key>
        <string>item track list 2</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>justification</key>
        <string>right</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>1023</key>
    <dict>
        <key>- loc hint -</key>
        <string>item track list 3</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>justification</key>
        <string>right</string>
        <key>size</key>
        <integer>9</integer>
    </dict>

    <key>1024</key>
    <dict>
        <key>- loc hint -</key>
        <string>item track list 4</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>9</integer>
    </dict>

    <key>1001</key>
    <dict>
        <key>- loc hint -</key>
        <string>item grid 1</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>1002</key>
    <dict>
        <key>- loc hint -</key>
        <string>item grid 2</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>9002</key>
    <dict>
        <key>- loc hint -</key>
        <string>List Contents (Small)</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>9029</key>
    <dict>
        <key>- loc hint -</key>
        <string>List Contents (Small Bold)</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>5</integer>
    </dict>

    <key>1307</key>
    <dict>
        <key>- loc hint -</key>
        <string>playlists outline small font (selected)</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>3</integer>
    </dict>

    <key>1304</key>
    <dict>
        <key>- loc hint -</key>
        <string>playlists outline small font</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>7</integer>
    </dict>
Hope this helps.

How can i extend the table control while transfering the data

hi
how can i extend the table control while transfering the data.

Hi,
For table control we have to handle the page down (P+, or what ever function codes are assigned to that activity) activity with our coding.
Just check out this code:
This is the bdc to update the XK01 transaction code (Vendor Creation).
Here we will use table controls for bankings. Here Iam sending the coding and text files.
Coding
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'. " Page down activity
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
**Flat files for the above code***
Intial screen data file.
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
Table control Data:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Kumar.

How can I change the window size of iTunes? Used to be easy before installing Mavericks.

How can I change the window size of iTunes on my iMac? Used to be easy before installing Mavericks.

If you want to make the itunes tab so you can see the dock
you press the
esc
button if your in full screen mode
if you want to get into full screen mode you press the arrows facing away from eachother in the top right corner
there is another way to get to the normal tab if your in full screen
make the curser go right up to the top of the screen and it will show the apple tab
it will have two arrows facing together highlited in blue
if u tap that it will take you to the normal tab

How can I change the page size of a pdf so i can view it on my iphone more clearly?

How can I change the page size of a pdf so i can view it on my iphone more clearly?

I think there may be more to this question than you say.
If your PDF page is say, 8 x 12 inches, and you found a way to scale it to 25%, changing it to 2 x 3 inch, shrinking everything on the page to quarter size - wouldn't it look exactly the same on the iPhone? It's just going to be the same as zooming.
Or were you hoping for something more like in Word, where changing the page size keeps everything the same size and spreads it over more pages? That isn't something you can do.

How can I adjust the font size of my printouts?

I have an HP Officejet 4500 all-in-one printer and a new HP pavilion Slimline computer. Since I changed to this computer, my printouts have very small font size making them hard to read. How can I adjust the font size of the printout? Is it a computer or printer function? I appreciate the help.

I, too, am frustrated. This seems like something that would easily be handled within the application software. However, none of the fixes I've been offered have been very helpful. My cousin sugested using Control C and Control V to move the text to WORD. Once in WORD, you can manipulate the text on a WORD page...sometimes. I've had good and bad luck with this method. It still requires working in two different programs to get it legible. Does anyone else have a 4500 All-in -one with this problem, or is it only me? Thanks, [Edited for Personal Information]

How can I increase the font size of my email when I print it out, it is printing tiny

How can I increase the font size when I print out emails, it is printing tiny size?

In the Print dialog window, click the small reveal-button to the right of the printer's name -
The window will expand to show additional settings (similar to 'old' Page Setup) -
Be sure "Scale:" is set to 100% and the 'Keep apparent font size' item is checked.

How can I change the page size of a scanned PDF document?

How can I change the page size of a scanned PDF document?
I scanned a 50-page document with an HP 5610xi All-In-One using the software that comes with it: HP Scan Pro. Though the physical document has standard 8.5" x 11" pages, the PDF resulting from scanning has page size set to 35.42 × 48.67 inches (according to Preview's "Tools > Inspector". I want to resize the pages to 8.5" x 11". Shouldn't Preview be able to do that with "Tools > Adjust Size..."? When I try, the menu option is grey so I can't select it.
I'm using Preview Version 4.2.

Thanks for the insight; that explains why it's the wrong size. I selected 300dpi scanning (which is the default, actually), but HP Scan Pro evidently created a PDF with 72dpi indicated. I want it fixed because I want to distribute the file to other people and have them able to print or display it without problems.
I still don't know why Preview won't let me change it, but your question about whether I wanted to print it did lead me to find a workaround: "File > Print" and "Save as PDF..." saved it with the correct page size.

HT4863 How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.

How can we increase the font size in Adobe Bridge CC 2014?

How can we increase the font size in Adobe Bridge CC 2014?
We use Windows 7 64bit computers and Dell High Density UltraSharp UP2414Q monitors with a resolution of 3840 x 2160.
Other applications in Adobe CC 2014 work fine with this high resolution (Indesign, Photoshop) but I can't find where to adjust font size in Bridge.
Right now menu items are hardly ledgible.

Same problem. Bridge is unusable with this micro font and no way to change it.
I would call tech support but I don't feel like being on hold for two hours to talk to someone Adobe pays pennies a day in a loud call center who won't be able to help anyway. Fail.

How can you change the font size in the application and system headers?

How can you change the font size in the application and system headers? I searched the system and finder prefs to no avail. Changing the screen density is not a good option.
Thanks

I downloaded Tinkertool. Found the font section and increased the size of most selections. The only thing that changed that I can see is the window label. The apple line, bookmarks line, the tool bar in safari are all the same---font size of about 4. Found the finder "show view options" but that didn't seem to change anything either. I'll keep working. Restarted all apps after changes as well.

How can I change the font size on the Mail program?

How can I change the font size on the Mail program? The text is quite small right now.

Go to fonts and colors in Mail preferences and there you can change the font or size for the different parts of Mail.

How can i change the font size of internet explorer pg or smart web printing pg photosmartd7560

how can i change the font size of internet explorer pg or smart web printing pg photosmart d7560

Go to tools
then internet options
fonts

How can I estimate the table size?

Similar Messages

Maybe you are looking for