How can I even out the volume levels of my audio?

Hi,
I'm fairly new to FCE and to editing in general.
I've got a clip which contains a conversation, my camera is pointed at one of the speakers and their side of the conversation is significantly louder than the other.
Is there a filter I can use to make the loud side quieter and the quiet side louder in order to hear both sides of the conversation at roughly the same volume?
TIA,
Rob.

Hi Rob,
I asked a similar question recently, and though I ended up concluding the easiest thing was to just adjust the volume manually as Ian suggested, you can take a look at the suggestions I was given about possible filters and such here: http://discussions.apple.com/thread.jspa?threadID=1564173&tstart=0
Hope that helps; good luck!
Claire

Similar Messages

How do I even out the volume for songs in my playlist?

How do I even out the volume for songs in my playlist? Can I tell somewhere what the volume level is for each song and then change it so all the songs are the same, then re-synch?

Hey Eegee
I would turn on Sound Check to level out the songs. You do this by going to iTunes Preferences > Playback Tab > Check Sound Check.
iTunes: About Sound Check
http://support.apple.com/kb/ht2425
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How can you even out the skin tone/color from a raw photo on photoshop or bridge?

Hello all,
I am trying to figure out how to even out the skin color, I have a picture of a model, unfortunately due to light and make up and her skin color the color of her face and her hands and body dont match, I think I saw a video on youtube where the skin color was evened out throughout the picture from raw I think this was done on bridge but I am not sure.
any one can please explain how to even out the skin color eitther on PS or bridge?
I currently have CS5 on a win 7 pc.
many thanks

There are any number of resources on portrait touchup. Start by googling.

I Need to Even out the Sound Level from Tune to tune

This is the problem I'm facing ....
After recording a number of tunes ... and then burning them in iTunes ... I'll find that the ouput level changes from tune to tune.
For example ... one tune's overall sound level is too low compared to the next one.
When I'm mixing I of course try to have the master output as high as possible without clipping.
I have been using Fission to normalize each tune individually ... but
Is there a way to even out the levels from tune to tune. Of course i have "Sound Check" marked in iTunes preferences.
Here is a strange but true story ...
Someone took one of my disks with this problem .... went to a Sony store where they copied it ...
and the sound levels are more even I swear. Is there some sort of software in cd copiers that can do this?
Thanks ......

Here are a couple of articles that give a useful overview of Mastering:
Preparing Your Music For Mastering
Mastering: How The Pros Do It
Other than that, the Normalizing you're doing is the easiest way to even out the relative levels.
WH

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

HT4356 I don't have wireless printer. How can I print out the document?

I don't have a wireless printer. How can I print out the document from regular printer?

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

Help! How can I take out the mini-disc stuck in mac?

Help! How can I take out the mini-disc stuck in mac?
I insert it into the mac, but the OS cannot load the disc and the disc cannot be ejected even i pressed the "eject" button.

This happened to a family members macbookpro. A mini-cd inserted, couldn't be mounted or ejected by the drive.
I cut a rectangle from a cereal box about two inches wide and 6 inches long. Abour an inch and half from one end in the middle I cut a notch and bent it down a little.
I................I
I................I
I....I__I....I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I................I
I________I
I then inserted it slowly into the drive notch down and slowly pulled out. I did this few times and caught the mimi-cd and removed it. The drive has worked flawlessly for several years
A few days after this happened I was in BestBuy and an Apple rep was there displaying new Apple products. I asked him about it and he said they have a tool that ***** it out.

How can i find out the table hierarchy

Hi experts,
I have one doubt. how can i find out the table hierarchy in the particular schema.
Let me explain my requirement in detail.. In my Database i have nearly 250 table each table have it's own temporary table(for authorization purpose we are maintaining the temporary tables) for each day i have to clear the temporary table data.
All temporary table connected with each other. i mean all the table having foreign key relationship.. while i attempt the delete the data from the temporary table it showed ORA-02292: integrity constraint violated - child record found.
So can any one please tell how can i delete the child table record first and then parent record table record.
Thanks in advance
Arun

CREATE OR REPLACE FUNCTION get_child_tables (
ptable VARCHAR2,
powner VARCHAR2 DEFAULT 'SCOTT',
plevel NUMBER DEFAULT 10
RETURN stringarray
-- -- create this ON SQL*PLUS "CREATE OR REPLACE TYPE STRINGARRAY AS TABLE OF VARCHAR2(50);"
-- AUTHID CURRENT_USER
PIPELINED
AUTHOR DATE VERSION COMMENTS
======================================================================================
[email protected] 26-OCT-2009 1.0 Developed to ease developers effort to find Nth level of Referential integrity
======================================================================================
-- PURPOSE -> To find PARENT=> CHILD relational TABLE(S) in Oracle upto a depth max N Level.
--SYNTAX TO USE
SELECT * FROM TABLE( get_child_tables('DEPT','SCOTT',3)); Store this query in a file for your use
SELECT * FROM TABLE( get_child_tables('EMPLOYEE')); Store this query in a file for your use
-- RESULTS looks as below
--1 => DEPT
--2 => EMP
--2 => EMP2
--3 => EMP_CHILD
--3 => EMP2_CHILD
-- and so on
--This can be leveraged to use in any oracle database REGION 10g having and above.
--This FUNCTION gives formatted result of the Oracle 10g Hierarchical query result coded in the cursor
--to find MASTER => CHILD relational TABLE(S) upto a depth max 10 Level.
--The result of the PIPELINED function can be retrieved using Oracle new operator
--TABLE(array name) in SQL query.
--Due to the AUTHID CURRENT_USER compiler directive any user can use based on his/her access privileges on the database.
--GRANT EXECUTE ON SCOTT.get_child_tables TO PUBLIC;
--CREATE OR REPLACE PUBLIC SYNONYM get_child_tables FOR SCOTT.get_child_tables;
IS
atname stringarray := stringarray ();
-- create this ON SQL*PLUS CREATE OR REPLACE TYPE STRINGARRAY AS TABLE OF VARCHAR2(50);
vlevel NUMBER;
vtname VARCHAR2 (50);
nindex NUMBER := 0;
bprocessed BOOLEAN := FALSE;
CURSOR c1 (powner_in IN VARCHAR2, ptable_in VARCHAR2, plevel_in NUMBER)
IS
SELECT LEVEL, LPAD (' ', (LEVEL - 1) * 2, ' ') || pt AS "TNAME"
FROM (SELECT a.owner w1, a.table_name pt, a.constraint_name c1,
a.r_constraint_name r1, b.owner w2, b.table_name ct,
b.constraint_name c2, b.r_constraint_name r2
FROM all_constraints a, all_constraints b
WHERE a.constraint_name = b.r_constraint_name(+)
AND a.owner = b.owner(+)
AND a.owner =
UPPER (powner)
-- Change Owner here while testing
--AND A.r_constraint_name IS NULL
AND a.constraint_type IN ('P', 'R')) v1
START WITH pt =
UPPER
(ptable)
-- Change your master table here while testing the QUERY
CONNECT BY PRIOR ct = pt AND LEVEL <= plevel;
-- Change lavel here while testing
BEGIN
atname.EXTEND;
atname (1) := 'NOTHING';
OPEN c1 (powner, ptable, plevel);
LOOP
bprocessed := FALSE;
FETCH c1
INTO vlevel, vtname;
IF nindex > 1 AND atname (atname.LAST - 1) = vtname
THEN
--DBMS_OUTPUT.PUT_LINE('2 ==== vtname ' ||vtname || ' '|| atname.count|| ' '||atname.last || ' '||atname( atname.last-1));
bprocessed := TRUE;
END IF;
IF NOT bprocessed
THEN
nindex := nindex + 1;
atname.EXTEND;
atname (nindex) := vtname;
PIPE ROW (vlevel || ' => ' || vtname);
DBMS_OUTPUT.put_line ( ' **** nindex - atname( nindex) '
|| nindex
|| ' - '
|| atname (nindex)
DLOG('ADDING ',vTname); A LOGGING ATONOMUS PROCEDURE FOR DEBUG PURPOSE
END IF;
EXIT WHEN c1%NOTFOUND;
END LOOP;
CLOSE c1;
FOR i IN 1 .. atname.COUNT
LOOP
DBMS_OUTPUT.PUT_LINE('atname (i) ' ||atname (i));
END LOOP;
RETURN;
EXCEPTION
WHEN no_data_needed
THEN -- THIS EXCEPTION HAS TO BE THERE TO GET THE FUCTION WORKABLE
DBMS_OUTPUT.put_line (SQLERRM);
RETURN;
--SELECT * FROM TABLE( get_child_tables('TB_XOP_LETR_TEMPLATE','OPS$CMS',5));
END get_child_tables;
Edited by: user3066657 on Jul 21, 2011 8:42 AM
Edited by: user3066657 on Jul 21, 2011 11:26 AM

How can i find out the size of video on my iphone 5?

How can i find out the size of video on my iphone 5?

As far as I've known, all iPhones (3G/3GS/4/4S/5) sold in China (probably only in China) have this low battery alert sound.
So called "localization" or what...
Actually many people found it annoying coz it plays even when the phone is switched to SILENT. However no solution has been found so far
PS: reeeeeeeally hope Apple could see this thread and at least give Chinese users an option to switch it off!!
<Edited By Host>

How can we find out the info object in a query ....?

How can we find out the info object in a query is belongs to that particular info cube? If the query is built on a Multiprovider having 4 different info cubes.

Hi,
If you have restrictions at the infoprovider level in the RKF then it is coming from that particular infocube.
Or go to the selection option in the multiprovider...her you can get the mappings of which key figure is populted from which infocube.
For characteristics you will have to look for identification tab in the characteristics option.
Thanks

How can i print out the waveform chart?

hello everybody,
how can i print out the "waveform chart". can i do it just push the button. ( example; stop button is stop the program etc..)
i checked the NI examples but i can't understand. i'm new to the Labview.
pls help me.
i added the my program
look forward your reply
regards from turkey...
Message Edited by hknmkt on 05-29-2008 04:15 AM
Attachments:
29.05.2008_11.vi ‏37 KB

hi jim,
i tried the program but it's not running. When i run the program, it's print out without run the program
i added the printed file.
look forward your reply
hakan
Attachments:
error8.JPG ‏8 KB

How can I find out the dpi of an image in Acrobat.

How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
That opens a panel on the right.
To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

How can I close out the page I am working on in safari when error boxes keep popping up?

How can I close out the page I am working on in safari when error boxes keep popping up?

What do the error messages say ?

How can I find out the mail server from email address?

Hi:
How can I find out the mail server from email address?
for example: If I know the email address is [email protected],
how to find the pop3 and smtp mail server?
THANK YOU

You can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
Sean

How can I find out the screen size of the users moniter using the Acrobat SDK?

How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
Thanks,
Gregory

Currently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
Gregory

How can I even out the volume levels of my audio?

Similar Messages

Maybe you are looking for