How can I expand the source panel on the Import dialog window (mac LR3.3)?

Hello,
How can I expand the source panel to the right under the Import dialog window?
I'm unable to drag the seperation line to the right and therefor unable to view folder names when in lower hirarchy...
thanks you
shlomit

Shlomit Heymann wrote:
shouldn't there be at least a scroling bar from left to right? How am I suppose to view my sub folders names?
To a lesser extent, the same problems exists on all panels, whether they be in import window or elsewhere. Just look at the Folder panel in Library to see how much space is wasted in offsetting the subfolders. When this was pointed out to the relevant folk the reply came back that it was by design. Bad design, but we're pi...g into a head wind trying to get it changed.

Similar Messages

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

Ouch, well there is a problem.
This is the stack of partitions on your old drive
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
This is the same stack on your new drive imaged from the old one.
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
Emtpy Space (100GB say)
This is what you want
EFI (hidden)
Lion (100GB say)
Bootcamp (100GB say)
Lion Recovery Partiton (hidden)
EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
And you only have four partitions.
You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
This is what your going to need to do.
You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

HT1481 I have an ipod shuffle which i need to reset as i can not sinc it on my laptop which is using windows 8, but when i open itunes i d not have the 'source panel' on the left hand side which should show up my ipod. any ideas what i need to do? please

Hi I have an ipod shuffle which worked well on my old pc but since i have tried to link it with my new laptop I cant get it to sinc. I have athorised the device to my laptop so i thought it maybe worth resetting it but all the info I have read tells me that to reset my ipod i need to open i tunes and on the left hand side in the 'source panel' i will find my ipod listed but when i open itunes i do not have a source panel so i cant reset it. i have spent days trying to get this problem sorted and am about to throw the thing away. I have tried to manually sinc the thing, i have installed and reinstalled the latest version of itunes, i have restarted my laptop but i dont know what to do next. any help would be very much appreciated. Many thanks in advance

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

How Can I Create a Custom Panel With the InDesign ToolBar's Look and Feel

I am trying to create a custom panel that looks as close as possible to InDesign's native floating menu bar (with the Frame, Text, etc, icons on it). ToggleBarButtons doesn't look like, although it does contain the functinoality of the button which is pressed stayting pressed.
Any ideas?
TIA,
mlavie

Hi mlavie,
I found a nice post on this topic at:
http://blog.flexexamples.com/2007/08/20/creating-toggle-and-emphasized-button-controls-in- flex/
Hope this helps!
Thanks,
Ole

How can I package an HTML5 panel from the command line?

I am able to use the Eclipse Extension Builder plugin to export a ZXP file, but for our build process we will need to do this from the command line. Is this possible?

Edit: Adobe has fixed the links and the downloads are now available.
The links to the Windows downloads do not seem to be active anymore. Is there somewhere else we can get these?
http://labs.adobe.com/downloads/extensionbuilder3.html

Rolls in the Source panel?

Hello,
A fairly simple question, but I'm kind of stumped: how can I get individual rolls to show up in the source panel on the left of iPhoto? I've imported some folders from my PC, and they are automatically reorganized as new rolls in iPhoto, but the Source panel only presents me with the following options: 2006, Last Roll, Last 12 Months, and so on. How can I set it up so that each of my rolls is displayed as a separate item in the Source panel?

Jakey1980:
What argento is describing is creating an "album" and then dragging the photos from the roll into that album. You can have virtual folders in the Source window that can contain albums, slideshows, etc. and other subfolders. But actual Rolls are limited to the main library. Here's what some folders and albums would look like.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

How can I expand the gutters in a document created with a Pages brochure template?

How can I expand the gutters/ space between panels on a document created with a Pages brochure template?

You haven't said which.
Each panel is usually just a locked object, unlock them and resize the boxes.
Peter

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I display a changing variable in a subvi on the front panel of the main vi as the subvi is excuting

In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
Thank you.
Solved!
Go to Solution.
Attachments:
Doc2.docx ‏554 KB

Hopefully I can explain it well enough. It really is simple.
1) Create an empty global variable and call it something like User Interface References.vi
2) For each and every control and indicator on your front panel, right-click and select Create/Reference
3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
4) For each of the references, right-click and select Create/Indicator
5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
Hopefully this all makes sense. If not, let me know.

TS3999 In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ event

In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date? i.e. more "user-friendly" presentation?
Thx!
[email protected]

In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date? i.e. more "user-friendly" presentation?
Thx!
[email protected]

How can I get the source code of the google chrome ios app

How can I get the source code of the google chrome ios app

Google is your friend
http://www.chromium.org/
and
https://developers.google.com/chrome/mobile/docs/iosoverview

How can I make an image placed in the body tag expand to the entire width of the browser?

How can I make an image placed in the body tag expand to the entire width of the browser?I

background-repeat -- best used with small image tiles.
background-gradient - Ultimate CSS Gradient Generator - ColorZilla.com
background-size:cover - Resizable Full Page Background Image
Nancy O.

How can i do this in Captivate 7 "The idea when user click on "Correct answer" button, drag source m

How can i do this in Captivate 7 "The idea when user click on "Correct answer" button, drag source move to drop target automatically".

I suppose you are talking about the D&D interaction? Could you explain more? What is your level of expertise with advanced actions and Effects?

Is there a way to make the Markers panel work better with the Source panel?

My workflow is to first cut a multi-cam project (but it could be any long clip), then watch it all over again to make notes about what to keep and what to kick. So after I'm done cutting the initial rough cut of the entire hour or two of footage, I'll set focus to the Markers panel and begin watching the entire clip from the beginning to make notes as markers within the clip.
I'll play the clip back in the Source monitor and when something interesting happens, I'll type "M" on the keyboard. This places a marker in the clip (or multi-cam clip in my case). Without stopping the clip, I'll pick up my mouse and tap the Markers tab in the notes section for the last marker laid down. I'll type a note (something like "S" for interesting "Shot" or "HUGS" or "DANCING" to indicate the main action occuring at this point in the clip, or "Mike: Are we there, yet?" for a key dialog point). Next, I'll move my mouse back to the Source panel (the video has not stopped this entire time) and give any gray area of the Source panel a tap just to activate it. I'll watch for the next point of interest and repeat the process. M to mark. Move to the Markers panel. Tap the last marker. Type some notes. Move back to the Source panel and tap to give the panel focus. This works fairly well, but could be tuned, with just a few options, to make it more streamlined for this type of use.
What I'd like to be able to do is never leave the keyboard AND use minimal keyboard shortcuts. A perfect workflow might be:
1. Start playing the clip in the Source panel.
2. Type "M" to drop a marker. Focus would AUTOMATICALLY move to the notes section of that marker within the Markers panel, while the video continues to play on in the Source panel.
3. I type my notes into the Markers panel and hit Enter, or CTRL+Enter, which returns focus to the Source panel.
This would allow me to quickly build a list of markers and notes about a clip or sequence without ever stopping and without once touching my mouse (unless I get behind and need to backup). Currently, the only time I really get behind is when clicking on a window and not realizing that focus was not given to that window, so that when I hit "M" again, for example, I don't actually create a new marker, but rather add the letter "M" to my most recent Marker note.
All of this seems a very common task for anyone who works in reality TV, or even event videography. Who's with me? Can this be done already? If not, I'll submit a feature request. How would you make this feature better?

Sounds like you did this on the fly.
MM is supposed to open the Marker Panel Dialogue
M just sets a marker
Not sure if either are intended for on the fly during playback .
There is also a Marker Icon on the Source Window Pane >>

I keep getting the message: "what should firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

I keep getting the message: "what should Firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

cor-el,
Thanks for your prompt reply. However, the sources you gave do not seem to apply exactly to my situation. I have attached some screenshots that show what the dialogue box looks like for a pdf download, and what my settings in the Apps panel of Options are. You will note in the first screenshot that I have checked the box to handle this file type automatically; however, the next time I try to download a file of that type, the same dialogue box appears looking exactly like the one shown, so checking the "automatic" option appears to do nothing. The files to be downloaded from my Gmail messages are not generic or altered file types - they are shown as pdf, doc, docx, etc. So while your intent was good, your post did not help. Thanks anyway.

How can I expand the source panel on the Import dialog window (mac LR3.3)?

Similar Messages

Maybe you are looking for