How can I export a Quicktime with Alpha embedded?

I have a few titles that I've created in Premiere.  I've placed these titles into their own sequence and would like to export them as a Quicktime movie using the Animation codec with an embedded alpha channel (Millions+) so that I can import it into After Effects and do some animation work with them.  I don't want them against black though. 
When I Export Media in Premiere and select Quicktime with the Animation codec, the "code settings" button is greyed out.
Please help.  There must be a way to export media with an embedded alpha channel like you can in FCP.
Thanks.

WoOWavE_Sync_Pro,
I don't see what is complicated about it at all. I don't mean to start an argument, but making a title is easy, exporting it with an Alpha channel is easy (as shown above). Where is the problem? Why go to TIFF? I certainly would never "export normally and key out the backgrounf (sic) in AE"
Perhaps you would care to explain your comments in more detail?
If you are interested in the font style I used, it came from Tim Kolb back in the CS3 days or before. I have a link to his styles on my web site. I used to count the downloads, but over the years I lost track.
Of course, having said that, if I was going to have a complicated title with motion, I would use AE to begin with.  And I would probably use a downloaded template as a starting point. But that is because other people are more creative than I am. I am just a techie dabbling on the creative side of things.
By the way, I suppose I should get around to testing your product. If I like it, I will post a link on my web site to direct people to it. Feel free to send me an email from my web site telling me why people should use it and what you want people to know about it. And you might want to suggest how to test it as well. I used to get a LOT of visitors every day. It has cut way back since I have not been updating it. Now that I have started to update it again, I expect the visitor count will rise again. The moderator is only doing his/her job. This is a site sponsored by a corporation, and advertising for other companies is probably not good form (besides being against the rules).
http://www.stevengotz.com

Similar Messages

  • How can I export a video with audio from premiere cs 5.5 to a DVD

    how can I export a video with audio from premiere cs 5.5 to a DVD

    You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

  • How can I export a file with transparent background?

    Hi all,
    I know InDesign doesn't allow to export a PNG file, but I need my file to be in image file format with transparent background.
    I'm still learning so I am stuck here. How can I export a file with transparent background?

    If you can't get the PNG file export to work, you can export a pdf and open it in Photoshop, from there you can save it as whatever you like.

  • How Can I Export A Table With Its Entries ( values )

    Hi guys,
    How can i export a table with the entries that the table is populated with ??!!
    Best Regards,
    Fateh

    To export a table and its data you can do it a number of ways.. Do you have access to SQL Developer? If not you can do it through the APEX SQL Workshop..
    Under SQL Workshop, Utilities, Data Unload, To text (or XML, whichever you are more comfortable with..).. Select your schema, click next button, select the table, click next, select the columns you want exported (select ALL ITEMS in the select List), click next, on optionally enclosed by I usually enter a " (Sometimes I have long strings in columns), click the include column names checkbox to get the column names at the top of the document, click unload data button..
    To get the ddl (code to build table) Sql Workshop, utilities, generate ddl, create script, select schema, select next, click table checkbox, select next, click the checkbox of table you want to get ddl for...
    Thank you,
    Tony Miller
    Webster, TX
    There are two kinds of pedestrians -- the quick and the dead.
    If this question is answered, please mark the thread as closed and assign points where earned..

  • How can I export m2ts footage with 5.1 audio in PP CS5.5?

    Dear All!
    I have a 90 minutes project which made from 4 sequence. Sequence settings are the followings : AVCHD 1080p 25fps square pixels , 5.1 channel master audio.
    I made the sequences from avchd file-s, which recorded with Sony HDR-CX700V with AVCHD 1080p 25fps and Dolby digital 5.1 sound.
    Right now I finished the project with lots of effects and imported After effects compositions, and I cannot find any setting to create 5.1 sound.
    I have Mainconcept codec suite, but this offer m2ts 1440*1080i settings only.( And I cannot configure the mainconcept codec settings.)
    Do you have any idea how can I export the project without any degradation, and with 5.1 audio? The original footages recorded with this properties : H264/AVC - top field first - 22.000 Mbit/sec.
    And I use in the project some 720p H264/AVC - progressive - 8.001 Mbit/sec videos.
    Please help! Thanks a lot.

    You have to consider a couple of things. Mixing 1080 and 720 material is best done in a 720 sequence, because uprezzing will seriously deteriorate quality, unless you accept black borders. That also means exporting a 720 format as maximum, unless again you accept serious quality loss. Whatever the resolution you choose, exporting AVCHD material to anything else than uncompressed, Lagarith or UT will entail a generation loss and thus quality loss. The best export settings are dependent on your delivery medium. DVD, BD or web.
    Since you are working in a 1080 sequence, the quality loss of uprezzed 720 material is not a big issue, apparently, so what is the relevancy of 'the same quality' on export when you have already compromised quality?

  • How can I export a movie with audio that I have edited in logic 9 to a quicktime movie

    I imported a quicktime movie into logic and added audio and effects but when i export it the original audio from the quicktime movie is still there even though it doesn't sound in logic!

    Hi
    One of teh final steps in the Export to Movie process is a dialog box where one can select which of the audio tracks embedded within the movie are included.
    You must actively de-select those tracks that you do NOT want to include in the Export.
    CCT

  • How can I export via QuickTime in iMovie '13 (10.0)?

    Prior versions of iMovie had an export via QuickTime option, which allowed me to select the file format, encoding settings, etc. After upgrading to the new iMovie, that appears to have gone away. The Share -> File option does not allow me that level of control over the output file. Has that functionality been removed from iMovie?

    I'm also having trouble with this. The new version of iMovie lost a lot of its features and is clearly focused toward the social media side of things. After importing using SD cameras that import video in a *square* PiP format, I am finding it impossible to update any of my settings to export the video in any other format that wouldn't cut out the picture. Basically, the only settings I've found in the share option of the iMovie 10.0 cu off the tops and bottoms of all my recording. Previously, I used QuickTime settings to pick what format and quality I wanted to export in. Does anyone have any insight about how to export using, say, a 640 x 480 format or in being able to adjust to any format other than the standard ones giving.
    Is there any other video software I can be using to import and export with that gives me more functionality?

  • Can't export MPEG-2 with alpha matte

    Can't export an .mpeg 2 with an alpha from after effects using media encoder. Is there a way to do this? The editor I am working with only accepts MPEG 2 for his lower thirds.
    Unfortunately I do not have a choice of formats and have to export MPEG 2 with an alpha. Easy enough with QuickTime and .Avi but have not seen an option with MPEG 2 in either after effects or encoder.

    No prob's
    1. Ensure that compressor is installed on your system.
    2. Export the sequence as a Quicktime movie using sequence settings.
    3. Launch compressor and bring your exported sequnce in, now you can apply one of the presets and, over time, read the manual and understand all of the subtleties of compression.
    Tony

  • CS4 - How do I export a video with Alpha from PPro CS4?

    I've done this a million times in CS3 and before and After Effects (all versions through CS4) but I cannot quite get it in CS4 with the new encoder.  I am using XP32.
    Will someone give me step by step instructions for setting up a 1280x720p .avi file with alpha in the media encoder?  Isn't there a preset already for this?  I've tried both QT.mov and .AVI and I either get garbage when I import the file back in or I get black video under my video even though the file says that it has an alpha channel when I import it back into PPCS4.

    Did you try the instructions here: http://help.adobe.com/en_US/PremierePro/4.0/WS2b635625315c8bcc1e63e3d1213c6c2363-8000.html

  • How can I export an mpeg2 with 4:2:2 chroma?

    I've done a lot of searching on this and learned a little bit but can't figure out what I'm missing.  I need to supply a company with a movie to very specific mpeg2 specs.  I've got all of the settings right except the file is rendering out with 4:2:0 sampling and it needs to be 4:2:2.  There isn't any sort of option for this in my Export Settings (using CS4).  Am I missing something obvious?  Or does this depend on the source material and it's something I can't change?

  • How can I Export a PDF with Hebrew Font

    I am having trouble exporting a PDF file with a Hebrew font into word document.

    Sorry for the long delay in getting back to you! I must have missed your original post.
    Unfortunately our ExportPDF service doesn't support Hebrew text.  You can vote for this feature in here: http://forums.adobe.com/ideas/1554  We use the Ideas section to help prioritize features.
    -David

  • Export to Quicktime with alpha channel

    I'm trying to export my Keynote project to a Quicktime video with a tranparent background.  I set my slide backgrounds to None. In the export panel I've selected the "User Transparency" option and under Custom settings I've selected Animation with Millions + colors.
    When I export the file it has a white background instead of transparent.
    Has anyone else had any success getting this to work?

    Do not render the contents of the sequence. If you render, the sequence is exported using the render files. With the sequence unrendered export using the Animation codec with colors set to millions+.

  • Can you export a Quicktime with multiple audio tracks?

    I have a video with split audio tracks.
    I'd like to archive a copy that retains all the individual tracks so that other people could just open the file later and not have to reconstruct the tracks (i could certainly archive all the tracks individually).
    the problem i'm having is that FCP seems to only want to allow me to export 2 tracks of audio. I may be missing a setting, but i'm not sure.
    I can digitize a clip from a digibeta with 4+ tracks, and when i open the clip in QT, it recognizes the individual tracks, so it seems as if the capabilities are there.
    have they just not been integrated yet?

    Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

  • How can i export the data to excel which has 2 tables with same number of columns & column names?

    Hi everyone, again landed up with a problem.
    After trying a lot to do it myself, finally decided to post here..
    I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
    It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
    Because both the tables have same number of columns & column names.
    Below are 2 tables with column names:
    Table-1 (MONTHLY_PART_1)
    Table-2 (MONTHLY_PART_2)
    SL_NO
    SL_NO
    COMP
    COMP
    DUE_DATE
    DUE_DATE
    U-1
    U-1
    U-2
    U-2
    U-4
    U-4
    U-20
    U-20
    U-25
    U-25
    Since both the tables have same column names, I'm getting the following error :
    Error 402 at line 103, column 4
      alias required in SELECT list of cursor to avoid duplicate column names.
    So How can i export the data to excel which has 2 tables with same number of columns & column names?
    Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
    Help me with this please.
    Thank You.

    You'll have to *alias* your columns, not prefix it with the table names:
    $[CHE_TEST@asterix1_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
      for rData in cData loop
    ERROR at line 18:
    ORA-06550: line 18, column 3:
    PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
    ORA-06550: line 18, column 3:
    PL/SQL: Statement ignored
    $[CHE_TEST@asterix1_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
    PL/SQL procedure successfully completed.
    cheers

  • In iPhoto, how can I export images with the metadata - including the title and caption information - intact as part of the image?

    In iPhoto, how can I export images with the metadata — including the title and caption information — intact as part of the image?

    Check those boxes in the export dialogue - Exporting From iPhoto
    LN

Maybe you are looking for