How can I export a selection as premiere PROJECT FILE to edit in another project....?

Wondering if anyone else has come across this issue....I must of hit an awful evil key because for the third time deep into an edit I traced back to my intro to find most of the audio pulled a Houdini on me and disappeared.
I've been through a tough edit, it's not as simple to just go back into my bins and recollect the clips to create my intro.
Luckily I found the exact intro I need in an auto-saved project file. Copy and pasting obviously does not transfer through project file changes, there is an option to "Export as Premiere Project File" under File, however after marking specific in and out marks and even selecting all clips I want to export, my option tool remains gray and inaccessible.
I need to export these specific clips as a project file so I may import the file as a sequence to a larger project.
Help?
Thank you so much in advance for your time and feedback.

Have you tried importing the sequence through the Media Browser?  To do so, browse to the backup of your project and double-click it. That will show you all the contents of the project. You can then drag the sequence into your working project.

Similar Messages

  • How can I export an Adobe illustrator CC .AI file to a DWG or DXF file suitable for SolidWorks?

    Hi
    Can anyone help?
    How can I export an Adobe illustrator CC .AI file to a DWG or DXF file,  without SolidWorks enlarging the file & converting every curve into hundreds of short little straight lines rather than a single continuous line/s.
    I have made sure the file is ungrouped or has any compound paths or colours.
    Opening it in Autocad 2010 still converts the DWG file into hundreds of short little straight lines!
    The file is needed to laser cut out an aluminium shape using SolidWorks 2008 (Metal soft)?
    Formats they can handle are:
    DWG, DXF, IGES, IGA
    There must be a way to export it without re-drawing the whole design in Soildworks again!!??
    Can anyone help?
    INCA

    Not really. This is a limitation you will have to live with. Unless you are extremely careful, most paths will be converted to polyline segments by AI and in particular in AI CC this is somehow busted, so it happens more often. You might have much more luck opening a native AI file in DraftSight or a 2D CAD program like TurboCAD and exporting a DWG or 2D IGES/ STEP file from there. The sizing issue is a different matter, but without knowing what units you actualyl used, nobody can advise.
    Mylenium

  • How can I export a playlist (.m3u) to local file system?

    How can I export my playlits to the local file sytem, e.g. in .m3u format. In iTunes 11 it was a simple click on "export" and choosing a file name, done. The button "export" is missing in iTunes 12.

    File > Library > Export Playlist...
    tt2

  • How can we export table data to a CSV file??

    Hi,
    I have the following requirement. Initially business agreed upon, exporting the table data to Excel file. But now, they would like to export the table data to a CSV file, which is not being supported by af:exportCollectionActionListener component.
    Because, when i opened the exported CSV file, i can see the exported data sorrounded with HTML tags. Hence the issue.
    Does someone has any solution for this ... Like, how can we export the table data to csv format. And it should work similar to exporting the data to excel sheet.
    For youre reference here is the code which i have used to export the table data..
    ><f:facet name="menus">
    ><af:menu text="Menu" id="m1">
    ><af:commandMenuItem text="Print" id="cmi1">
    ><af:exportCollectionActionListener exportedId="t1"
    >title="CommunicationDistributionList"
    >filename="CommunicationDistributionList"
    >type="excelHTML"/> ---- I tried with removing value for this attribute. With no value, it did not worked at all.
    ></af:commandMenuItem>
    ></af:menu>
    ></f:facet>
    Thanks & Regards,
    Kiran Konjeti

    Hi Alex,
    I have already visited that POST and it works only in 10g. Not in 11g.
    I got the solution for this. The solution is :
    Use the following code in jsff
    ==================
    <af:commandButton text="Export Data" id="ctb1">><af:fileDownloadActionListener contentType="text/csv; charset=utf-8"
    >filename="test.csv"
    >method="#{pageFlowScope.pageFlowScopeDemoAppMB.test}"/>
    ></af:commandButton>
    OR
    <af:commandButton text="Export Data" id="ctb1">><af:fileDownloadActionListener contentType="application/vnd.ms-excel; charset=utf-8"
    >filename="test.csv"
    >method="#{pageFlowScope.pageFlowScopeDemoAppMB.test}"/>
    ></af:commandButton>
    And place this code in ManagedBean
    ======================
    > public void test(FacesContext facesContext, OutputStream outputStream) throws IOException {
    > DCBindingContainer dcBindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
    >DCIteratorBinding itrBinding = (DCIteratorBinding)dcBindings.get("fetchDataIterator");
    >tableRows = itrBinding.getAllRowsInRange();
    preparaing column headers
    >PrintWriter out = new PrintWriter(outputStream);
    >out.print(" ID");
    >out.print(",");
    >out.print("Name");
    >out.print(",");
    >out.print("Designation");
    >out.print(",");
    >out.print("Salary");
    >out.println();
    preparing column data
    > for(Row row : tableRows){
    >DCDataRow dataRow = (DCDataRow)row;
    > DataLoaderDTO dto = (DataLoaderDTO)dataRow.getDataProvider();
    >out.print(dto.getId());
    >out.print(",");
    >out.print(dto.getName());
    >out.print(",");
    >out.print(dto.getDesgntn());
    >out.print(",");
    >out.print(dto.getSalary());
    >out.println();
    >}
    >out.flush();
    >out.close();
    > }
    And do the following settings(*OPTIONAL*) for your browser - Only in case, if the file is being blocked by IE
    ==================================================================
    http://ais-ss.usc.edu/helpdoc/main/browser/bris004b.html
    This resolves implementation of exporting table data to CSV file in 11g.
    Thanks & Regards,
    Kiran Konjeti

  • How can I export complex FRF data in ASCII files especially UFF58 format?

    Background:
    I have a problem saving analysed data into a format that another software program (MODENT) can import.
    I am using "SVA_Impact TEST (DAQmx).seproj", to acquire force and acceleration signals from a SISO hammer model test, and process up to the stage of an FRF and coherence plot. I need to export the FRF information into MODENT, meaning it must contain both magnitude and phase (real and complex) information in one file. (MODENT does not need the coherence information, which is only really used during the testing process to know we have good test data. The coherence information can already easily be saved into ASCII text file, and kept for test records - not a problem).
    MODENT is a speciaised modal analysis package, and the FRFs from tests can be imported into its processing environment using its "utilities". The standard is a UFF58 file containing the FRF information.
    Labview does not seem to be able to export the FRF data in UFF58 format. In general, Labview can export to UFF58, but only the real information, not the complex information - is this correct?
    Is there a way to export the real and complex information from FRFs using one file.
    I am working on this problem from both ends:
    1. MODENT support, to help interface into MODENT.
    2. Lavbiew support, to try to generate an exported file format with all necessry analysed data.

    Hi
    Have a look at the "seproj" and "vi" versions I mentioned in this thread - both available from the supplied example VIs in Signal Express and Labview. I've also attached these here.
    The "seproj"version has what are called "limits" for the input data, meaning it cheks certain criteria to make sure the test data sentfor analysis (to give the FRF) is wihin certain limits: 1. "overload" where the amplitude must be below a set maxiumum, 2. "time", where the signal must deacy to zero within the time envelope. These are useful test check functions to have.
    I looked at the conversion from SE to Labview VIs, but if I understand correctly, this essenetially embeds the SEproject in Labview, but does not allow the same use of viewing of the user windows during testing (eg seeing the overload plots, editing the overload levels, etc)?
    Other settings:
    -signal input range, sensitivity, Iex source, Iex value, dB reference, No. of samples and sample rate.
    -triggering off the hammer, with all the setting optons shown in step setup for "trigger"
    -all settings associated with the load and time limits; presented in a very useful format of either defining by X,Y coordinates, or by scalling.
    -all config and averaging options for the freqency response.
    The practise envirnoment in the SEProj version is also useful, as getting the technique right for using the hammer is not always easy, and it allows a quick check of basic settingsbefore doing the actual tests.
    The Nyquist plot in the VI version is useful.
    Happy New Year to everyone !
    Attachments:
    SVA_Impact Test (DAQmx) demo.seproj ‏307 KB
    SVXMPL_Impact Test (DAQmx).vi ‏75 KB

  • How can I export multiple selections in a list box into a .csv file?

    Hi all, I've created a form in Acrobat X with a list box enabled for multiple selections. When I try to export the filled out form into a .csv file, only the first selection shows up. Can anyone help me figure out how to get all selections to export? Thanks!

    Thank you for your quick response!
    Once a recipient fills out the form (which has two questions with list boxes and multiple selection enabled) they send the completed form back to me. When I open the completed form, I am given the option add the completed form to a reponse file which was set up when I distributed the form. When I open the reponse file, it lists all of the responses in rows, and the values that were chosen in the form are arranged in columns. In this file, the list boxe columns have multiple values, separated by commas (which is what I'm looking for). At this point there is an option to export into a .csv file or an .xml file. If I choose the .csv file and open in excel, only the first selection shows in the list box column rather than all selections that were initially made by the responder.

  • InDesign: How can I export indd pages to layered psd files?

    I wish to create layered PSD files from the pages of InDesign marketing brochures so that they may be used as templates in Photoshop by photographers (or whomever) that neither possess nor understand how to use InDesign? I have seen offerings by other offering both an indd file and multiple psd files but I cant discern a simple way to make that happen. I am hoping to be able have it occur via a "click" -- convert indd to layered psd. Id doesn't not appear to allow PSD export. What is another method to do this? I'm on PC.

    One way would be to export every Indesign layer as PDF and to assemble them again to a multi-layer PSD file.
    But there is a also script that can do what you want. Unfortunately for you, it is for Mac only.

  • How can I export a movie with audio that I have edited in logic 9 to a quicktime movie

    I imported a quicktime movie into logic and added audio and effects but when i export it the original audio from the quicktime movie is still there even though it doesn't sound in logic!

    Hi
    One of teh final steps in the Export to Movie process is a dialog box where one can select which of the audio tracks embedded within the movie are included.
    You must actively de-select those tracks that you do NOT want to include in the Export.
    CCT

  • How can I export emails from Mail to a file?

    I have emails in Mail from a previous email host I was using. I want to export them into a file to give to my new email host. Can someone give me guidance on how to do this?

    Try doing a Save As and make the format Raw Mesage Source.

  • How can we make JFileChooser select Directories along with files

    hi,
    i need to provide a functionality in a program that user can select one or multiple directories (ideally a combination of directories and files both) through file chooser. can't figure out how to achieve that. there must be some way of doing it.
    can anyone suggest something?
    regards,
    anshu

    i guess i have found the answer. i can set the file chooser's file selection mode property to achieve the same
    fileChooser.setFileSelectionMode(JFileChooser.FILES_AND_DIRECTORIES);but if you have any custom filters also set, it just crashes the VM.
    but still i have a problem, if you type name of a network path (instead of choosing the directory view), file chooser can't resolve it. any ideas???
    regards,
    Anshu

  • How can i export my custom abap code from one SAP system to another

    is there a way to export my custom code to any other SAP system.
    not the same client or server. say for ex: i develop a code in my system remotely and want to provide the same for my client to export into their system.
    maybe same versions but diff systems.
    is there a way to save as binary file or something?
    pls advice.
    thanks

    Hello,
    Yes u can do it.
    In SE38 give ur report name and click display.
    Now u will see ur code.
    In the MENU follow the path:
    Utilities-->More Utilities --> Upload/Download --> Download.
    Now ur report can downloaded to any format of file.
    Ask ur client to upload ur report in the similar fashion..
    Cheers,
    Vasanth

  • I recently installed Firefox 4.0 and it does not have the Organize Bookmarks option in the Bookmarks tab. How can I export my bookmarks to an html file?

    The Organize Bookmarks option has disappeared in Firefox 4.0. How do I organize, import and export bookmarks?

    '''Show All Bookmarks'''

  • (How can we) Export FXG from Flash Professional using JSFL

    How can we export a selection from Flash Professional as .FXG using JSFL? It appears that this is not possible... just yet! I have added this as a feature request within the Adobe Labs site for Flash Professional. Someone at Adobe suggested that I also explore the forums, so here we are. If you would also like to have this feature added, please let Adobe know by promoting the idea.
    Our use case is this: we have a large Flash file with a library of over one thousand skins and assets that were built in Flash with Adobe's Flex Skins Templates. These stateful, graphical skins were used within a custom theme by several Flex 3 projects. Our ultimate goal is to bring these through Catalyst, maintaining their vectors, and use them to create Spark skins.
    We've got a JSFL that can export each linked library asset, as well as any frame-labeled 'state' within these clips. However, currently we are using exportPNG, which is not ideal as it flattens our vector art into raster images. We are about to try the exportSWF option, and see what Flash Catalyst does with this. Our early attemps with importing swf's haven't been too amazing.
    I'm starting to imagine some cross-product scripting in which we export symbols at a state-by-state level as .swf from Flash, then rebuild these onto layers in Illustrator, and THEN import these into Catalyst...yikes!
    Anyone have a better solution?

    Follow-up:
    Out of pure wishful thinking I decided I would just see what happened if I pretended 'exportFXG' was already a part of JSFL. Based on the signature of 'exportPNG', i tried the following lines:
      var success = fl.getDocumentDOM().exportFXG("file:///C:/mySymbol.fxg"); 
      fl.trace("success:"+success); // output: success:true 
    It worked! Fantastic! I'm not sure if exportFXG is considered still in "beta" and therefore intentionally excluded from the docs, or if it was just an oversight. But at least it gives us something to experiment with.

  • I have added metadata in Prelude. How can I see the text in Premiere?

    I have added metadata in Prelude. Now in Premiere, I can see the "speaker" but none of the text I added. How can I see the text in Premiere?
    Message was edited by: Kevin Monahan
    Reason: More searchable title

    Both the Project and Metadata panels in Premiere Pro have a Metadata Display dialog that allows you to select which metadata properties are displayed. To access this dialog, right-click the panel's tab and select Metadata Display.

  • Can i export without double quotes in data files?

    How can i export without double quotes in data files using dataexport commands in MaxL?

    I don't know of any way to do any formatting in a straight export out of Essbase.  BSO lets you choose between a columnar vs. free form (really Essbase) format.  That lack of formatting includes removing double quotes.
    If you're willing to put up with the limitations (and formatting issues) of an MDX extract to a log file, that approach does not put double quotes around member names.  The same is true in Report Scripts although I have a vague recollection that you can put in double quotes if you want it -- obviously you do not.
    There are limitations to the above two approaches, the biggest being that they they are not as efficient as a true MaxL export.  OTOH, you may want only part of a database to get exported out in which case either approach may be more to your needs.
    If in fact you do want to do a full export, there are lots of OS-level ways of removing double quotes.  Here's a Windows-based approach:
    Removing double quotes in a batch program in Windows 2003 - Stack Overflow
    What would life be without hacks like the above?  Probably not worth living. 
    Regards,
    Cameron Lackpour

Maybe you are looking for

  • Saxophone sounds

    I am looking for some feedback/recommendations for good saxophone sounds for Logic. I am currently doing arrangements for a saxophone ensemble and need to produce good quality demos. The sounds that come with Logic are not very good. Can someone poin

  • All newly installed CC apps crash on launch, CS6 are fine

    I installed the new CC versions of Illustrator, Photoshop, and InDesign, and they all crash immediately after launching (no splash graphic). Unfortunately I uninstalled Illustrator CS6 before noticing that none of the newly installed versions will la

  • Standard and Non-standard exports and queries issue

    Hi, We have created a few STANDARD books with standard exports in them. The standard exports use standard queries. The ISSUE is that in the Verifications/Filters tab, where we have put in a lot of queries - ONLY the STANDARD queries show up. We would

  • New-AzureReservedIP : Cannot validate argument on parameter 'Slot'. The argument "MyIP" does not belong to the set "Staging,Production"

    I am trying to reserve an IP address in Microsoft Azure using simple PowerShell cmdlet: $reservedIP = "MyIP" $location = "West US" New-AzureReservedIP – ReservedIPName $reservedIP –Label $reservedIP –Location $location I get an error: New-AzureReserv

  • Info Record creation for Pipeline Material

    Hello, I am having issued while creating the Info records for a Pipeline Material(water) This is the error. "Material XXXX not a pipeline material" where as I have created the material as a Pipeline. I have Info Record created previously for other pl