How can I export an audio track with just the effect signal without the audio?

I want to export dry audio tracks and their effects signals as separate tracks. For instance a track with a reverbed snare would be one track with the dry snare and one with just the reverb.
I know from people who use Reason that it's just a box you need to tick, but I'm struggling to find out how to do it in Logic. Surely it must be a way?

I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience.

Similar Messages

How can I export photos from Aperture with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.

How can I export photos from APERTURE with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.
has anyone resolved this issue?
This is now the second big Problem with using Apple's Appeture with NO apparent FIX...
Aperture has NO DIRECT way to Burn to a CD/DVD & apparently NO way to RE-SEQUENCE the numbering system????
ANYONE... I wish APPLE would address/fix these 2 problems... LIGHTROOM I guess is next?

Hi David,
Coming in and whining loudly is rude. We are all volunteers here, voluntarily sharing our expertise so that users like you can make the most of their time with Aperture. Speaking just for myself: although I do care about your success with software (it's why I'm here), I don't care what software you use. If you want to use Lightroom, do so, and post your questions in an appropriate forum.
Burning files to a CD is a file operation done at the system level (it is built into OS X). Aperture lets your create sharable image-format files from your Images. You then use OS X's tools to burn those files to a CD. Iirc, you can set up a "Burn Folder" in Finder, into which you can export files created from your Images, and with a single click burn your CD.
Naming the files you create by exporting your Images can be tricky. There are _many_ possibilities. Some things can't be done. Sequencing can be done in a number of ways (see Léonie's answer above). What have you tried? What was the result? In what way did this differ from what you expected?
--Kirby.

How can i export a series of images in different aspect ratios to the same height

How can i export a series of images in different aspect ratios to the same height?
I wish to make a slider callery for my website. all the images need to be 750 Pixels high, the width does not matter. I have a mixture of square pandscap and protraite images can i do thing as one export or do i have to do it twice? Once for long edge and once for shot edge?
Thanks

Yes, you can but there is a trick to it.
In the Export Dialog under <Image Sizing> select Widdth & Height.
Then enter 750 pixels for Height.
Put your cursor into the Width field behind all the numbers that appear there and with the backspace key delete the numbers. If you enter "0" it will not accept that. But it accepts when you just delete the field for Width with the backspace key. The Width field will now be just blank.
When you then export all image will have a height of 750 pixels and the width will fall variously according to thne height / width ratio.
Or alternatively you can enter 7.5" for height at a resolution of 100 ppi.

HT2534 How can I download a free app with an existing Apple ID without to give my credit card infos?! The ID ist already made...

How can I download a free app with an existing Apple ID without to give my credit card infos?! The ID ist already made...

Sorry, but you can't. The process only works when creating a new Apple ID. With an existing ID you'll have to provide a payment method at least temporarily.
Regards.

How can I insert a number of photos in a numbers doc without the file becoming too large?

How can I insert a number of photos into a numbers doc without the file becoming too large?

Use smaller photos.
Seriously, reduce the file size of the photos in Preview, PhotoShop, iPhoto or other application before inserting tehem into the Numbers document.
Regards,
Barry

How can I export multiple language tracks?

I have a MOV video with two language tracks, English and German. I want to export the file to another format (m4v) or import to iTunes.
Whenever I export, I lose one of the audio tracks. How can I export both Audio Tracks?
The video is H.264, 688 x 416, Millions
BOTH audio tracks are AAC, Stereo (L, R) 48.000 kHz
In the properties window, I selected (enabled) both audio tracks before exporting. And, in the "other settings" tab of properties, I set the language for each track, and I listed the "alternate" as the other language track.
Also when I imported the MOV into iMovie it only had the English track.
Many thanks,
MyMacForMore

Whenever I export, I lose one of the audio tracks. How can I export both Audio Tracks?
Have not personally tried this, but you might try the Free HandBrake app. I have loaded a file with one active and one inactive audio track and found that HandBrake does see and allow you to select one, the other, or both tracks for processing. Did not actually bother to convert the tracks since they were already AAC and could be added individually to an MOV file using QT 7 "Pro" software.
Also when I imported the MOV into iMovie it only had the English track.
I believe iMovie "Finder" level import only allows one audio and/or one video track per file. You can, of course, extract the non-included track as an audio file, and add it to an iMovie project separately. However, be advised, that the audio tracks will be flattened/dowmixed to a single track during export which may not be what you want.

How to sync audio tracks with RED footage that has no reference audio?

So I shot a short film for my thesis project and the damn crew didn't record reference audio. We shot on a RED camera and had a sound guy with a shotgun mic. So we have crystal clear audio tracks from a separate sound card and tons of RED footage with abosolutely no sound.
Lucky we did use a slate, so I know I have to go one by one and manually sync all the audio with the right video tracks. Though I am unsure how exactly to do it. Once synced, will I have to edit from the timeline? How can I reimport the synced footage into a new project so I can edit from my media bin?

Hi PrimeSequence,
If you are having audio sync issues when playing back video in iTunes on your Windows machine, you may find the troubleshooting steps in the following articles helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Regards,
- Brenden

How can I export 6 mono tracks and a one track two channel stereo pair in a quicktime as separate tracks?

I'm using Premiere Pro CC 2014 (8.1) and need to export a 5.1 mix as well as the stereo tracks as 7 separate tracks in a quicktime. If I select 8 channels it automatically creates 8 tracks. Also, if I export the the seventh stereo track as mono track won't it play mono?
Thanks in advance for nay help you can offer.
-Sam

Hi Richard and Kevin.
First of all thanks so much for the response and info. Just to clarify, you're saying I will need 8 tracks, 2 of which will be designated for the stereo pair, right? My concern is that I'm supposed to deliver only 7 tracks. They want the stereo pair as separate channels on one track. I'm wondering if I can create a one track stereo pair and put it on a stereo track, then export only the seven mono tracks (plus an empty track). Would the stereo still work?
Thanks for the link to the previous post. I had actually read it and though it was helpful in explaining how to set up the audio tracks I was still confused about the export.
Much thanks,
Sam

How can I export speech analysis text with imbedded timecodes for the creation of subtitle files?

I found a script that allows you to export all your text layers with time codes as a .srt subtitle file. However, instead of multiple text layers, I have only one: essentially the meta data from Premiere speech analysis that with the aid of a different script, is being used at a "subtitle layer". Essentially, I'm trying to use this data to create a .srt file so I can create actual subtitles, not this hybrid animation/text layer.
Here is the script I used to export the text layer to .srt:
Subtitle Exporter v01
Script by Philipp Grolle
www.display-artists.de
Instructions:
Select all the Text Layers you want to export, run the script, and save the file as .srt
Attention: The Script has not been debugged or testet. Try it on your own risk!
// get all the selected Layers
var theComp = app.project.activeItem;
var alleLayer = theComp.selectedLayers;
// count how many layers are selected
var anzahlLayer = alleLayer.length;
// Enable the line below if you want to change the order of your text (ascending / descending)
/* alleLayer.reverse(); */
   // prompt to save file
   var theFile = File.saveDialog("Save the text file.", "untitled.txt", "TEXT txt");
   // if user didn't cancel...
   if (theFile != null) {
      // open file for "w"riting,
      theFile.open("w","TEXT","????");
         // Do it for all the selected Layers
         for (x = 0; x < anzahlLayer; x++)
             // get In- and Outpoint of the current Layer and convert to timecode (00:00:00:00)
            var timecodeIn = timeToCurrentFormat(alleLayer[x].inPoint, 25);
            var timecodeOut = timeToCurrentFormat(alleLayer[x].outPoint, 25);
           // split the value of the inPoint; converting last 2 characters (frames) to milliseconds, and finally join it again with comma instead of colon
            var str_in= timecodeIn;
            var timeCodeAnfang_in=str_in.slice(0,8);
            var timeCodeEnde_in=str_in.slice(9,11);
            var millisek_in = timeCodeEnde_in*40; // 1000 milliseconds divided by 25 fps = 40
            var zusammen_in = timeCodeAnfang_in +"," + millisek_in;
            //split the value of the outPoint; converting last 2 characters (frames) to milliseconds, and finally join it again with comma instead of colon
            var str_out= timecodeOut;
            var timeCodeAnfang_out=str_out.slice(0,8);
            var timeCodeEnde_out=str_out.slice(9,11);
            var millisek_out = timeCodeEnde_out*40;
            var zusammen_out = timeCodeAnfang_out +"," + millisek_out;
            //counter for the number above the timecode (in the results)
            var zaehler = x+1;
            //writing the results to file
            theFile.write(zaehler);
            theFile.write("\r\n");
            theFile.write(zusammen_in);
            theFile.write(" --> ");
            theFile.write(zusammen_out);
            theFile.write("\r\n");
            theFile.write(alleLayer[x].property("Source Text").value);
            theFile.write("\r\n\n");
      // close the text file
      theFile.close();
      // open text file in default app
      theFile.execute();
As I am only using one text layer, it shows me only one continious subtitle in the .srt file. Does anyone have any suggestions?

I should add that I myself am not particularly familiar with scripts or scripting, I'm merely trying all possible solutions to my problem and this seems to be a good approach. Any help would be much appreciated.

How can I export a single track in Soundbooth CS5?

Greetings,
I have built up a single track in Soundbooth composed of several repeated clips. I wish to export this single track.
How can I do this in CS5 Soundbooth?
Thanks,
folsombob

Sorry nobody has answered this. I haven't been in this forum in a couple of weeks.
If you have all the tracks right where you want them, are you able to save the file as an mp3?
Are you looking to export it for web use?
For video tracking?
I'm not sure why you'd want to export it as opposed to saving in one of the many available formats.

How can I export a graphic slide with a quicktime movie from Keynote?

I export a title slide with a quicktime movie from Keynote to my desktop and it plays fine with audio. Once I insert or drag the clip into iWeb the resolution is degraded and very choppy. The resolution is 320x200 and I'm exporting from Keynote as a custom size (320x200) Frame rate: 29.97 Key Frames: Automatic Key Reordering is checked Data Rate: Automatic Quality: Multi pass. I need some help.

how large is the video and if you publish - does it still have the same horrible quality?
you might considering exporting as flash (loads faster) and integrating that into your iweb site using post-editing: http://karreth.com/index.php/articles/iframes-iweb/
max

How can I export comments and tracked changes from Pages to Word?

I just purchased Pages and tried to export a couple pages of my document to Microsoft Word so I could send them for review to a client who does not have Pages; however, when I copy-pasted into Word, none of the comments or tracked changes showed up in the doc., only the finished product. I've tried updating my software, but that hasn't worked. Is there a way to fix this?

Here is what the Pages User Guide says:
" Exporting Pages Documents to Other File Formats
If you want to share your Pages documents with those who aren’t using the latest version of Pages, you can export your document to file formats that they may be able to use on their computers or other devices:
• PDF: You can view PDF files in iBooks, and view or print them in Preview and Safari. You can edit them with a PDF application. Fonts used in the Pages document are preserved in the PDF file.
Hyperlinks in your Pages document are exported to the PDF file. Hyperlinks are also created in the PDF file for table of contents entries, footnotes and endnotes, webpages, email addresses, and bookmarks.
• Microsoft Word: You can open and edit Microsoft Word files in Microsoft Word on a computer running Mac OS X or Windows.
Because of text layout differences between Microsoft Word and Pages, an exported Word document may contain a different number of pages than its Pages counterpart. You may notice other differences, as well, for example, table layouts and some special typographic features may not be identical. Some graphics (particularly those using transparency) may not display as well. Charts created in Pages appear as MS Graph objects, which you can edit in Microsoft Word.
• RTF: You can open and edit RTF files in many different word processors. RTF files retain most of the text formatting and graphics.
• Plain text: You can open and edit plain text files in many text editing applications, such as TextEdit. Exporting to plain text removes all document and text formatting, and images aren’t exported.Â ePub: You can open ePub files for reading in the iBooks application on an iPad, iPhone, or iPod touch, or in any ePub file reader. After you export your document to ePub format, you must transfer it to your device to read it in iBooks. To learn more about optimizing a document for ePub format, exporting it, and transferring it to your device, see “Creating an ePub Document to Read in iBooks” on page 257.
If your Pages document is password-protected, the password-protection is removed from the new file that's created upon export. However, if you export to the PDF file format, you can apply a new password at the time of export. "

How can I export comments and tracked changes from Pages to PDF?

Hello,
I would like to know how I can export my pages document to a pdf that still keeps the comments I had made in the pages version. I am using the latest version of Pages by the way.
Thanks in advance...

Last week I printed a Pages '09 document to PDF and it carried over all the comments and marked up changes. This week I foolishly updated to Pages 5 and it won't do this anymore. If you need to print to PDF and get the comments in the document, you have to switch back to Pages '09, which I am doing tomorrow. Cannot believe they gutted Pages like this.

How can I display my bookmarks toolbar with text only, but still have the rest of my toolbars (search, navigation, tabs, etc) display icons?

I have a bunch of bookmarks in my bookmarks toolbar. How can I make my bookmarks toolbar display only text but have my other toolbars (navigation, etc.) display only icons? It seems like I have to choose between icon, icon and text, or text for all of the toolbars. I want it to look like it did with my old version of Firefox. All my bookmarks in the toolbar fit, but now they dont because I cant get rid of the icons.

You can do that with the Bookmarks Deiconizer extension - https://addons.mozilla.org/firefox/addon/bookmarks-deiconizer

How can i enable mcafee site advisor with fire fox v 5.0 the latest update

i have your latest version which is v 5.0 but mcafee site advisor hasbeen disengaged ... how can i enable site advisor ... thank you alex [email protected]

I have found that firefox is better than internet explorer but has many more hickups like this with mcafee siteadvisor... why is it that internet explorer does not have this problem can anyone tell me alex

How can I export an audio track with just the effect signal without the audio?

Similar Messages

Maybe you are looking for