How can I extend language support in Portal

Hi everybody,
We need extend Vietnamese language suport for Oracle Portal.
In others portal (open source ), i can do it by config an properties like : locale.., and provider the resources for our language .
In Oracle Portal, i don't hearing anything related that
Can you suggest for me ?
Thanks for helping.
Sorry about my English

There is no such feature in Oracle Portal. If this is important for you, you should log an enhancement request vi Oracle Support.
Nat

Similar Messages

HT3775 how can i extend QuickTime to support additional codecs and components.

Hello everyone,
how can i extend QuickTime to support additional codecs, since i have a problem opening some video files that were shot by the laptop's camera.
Quicktime player says that the files are not recognized by the program and the program needs to extend its codecs
Thanks in advance

Yes, if you can find them. One such animal is Perian 1.2.3.

How can I restrain the user login portal once, in the same time ???

Hi
I need to restrain the user can't repeat to login portal ....
to reduce portal loading
How can I restrain the user login portal once, in the same time???
Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
tks

Does your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
- Jim

French Canadian (3F) extended language support with RFC libraries.

Hi All,
I have a customer that is using the extended language French Canadian (3F) they have metadata in this language that is different to French (F). There is no language pack for this so I cannot use 3F as the language property when opening a connection to SAP BW via the RFC library (or in the SAP GUI). However BEx Query Analyzer allows the user to logon using the 3F language property and returns the data in that language too . I have searched and everything I can find regarding setting languages/locales requires the 1 character language code which would be F (French) in this case, 3F is internal to SAP. BEx manages this but is there a way to return the 3F version of the data for the user using the RFC library.
Thank in advance,
Simon

After opening an SAP Incident it turns out that despite the fact that French Canadian only contains French characters (ie unicode not required), extended language support requires not only Unicode support but also the UTF16 LE code page (4103). So in order to support this the Unicode version of the RFC SDK library is required.

How can i change the image in portal logon screen

hi guys
pls tel me
how can i change the image in portal logon screen
thanks
regards
kamal

Hi
Download the par file com.sap.portal.runtime.logon.par.bak from
Go to System Administration -- Support -- Portal Runtime -- Browse Deployment.
The path should ROOT/WEB-INF/deployment/pcd. Now download that file into local system.
Create a Par project and make necessary chenages ..i.e
Open the downloaded par file with WinZip and inside the lib folder three jar files named com.sap.
portal.runtime.logon_api.jar, com.sap.portal.runtime.logon_core.jar and umelogonbase.jar will be there. Copy those files in the folder u2018libu2019 in par project.
Now change a branding Image...i.e
Replace the branding-image. jpg with your company branding image in the same name.
Once modifications are done,then create a par project and upload the par file into portal.
Go to the path System Administration -- Support -- Support Desk -- Portal Runtime -- Administration console.
then browse the file and click on upload.
Connect to server where the Portal WebAS is running and go to:
(drive):\usr\sap\<system id>\<system instance>\j2ee\cluster\server0\apps\sap.com\com.sap.security.core.admin\servlet_jsp\logon\root\layout.
There you will find the images used on logon screen, you can replace them for your
company images, please take care with the width of the images, as usual, to make this
change effective, you must restart the whole WebAS.
Regards,
Raju

How can i extend the battery life of my iphone 4s? when i left it in standby mode when i saw in 5hours it drains to 5%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

How can i extend the battery life of my iphone 4s? when i left 50% it in standby mode when i saw in 5hours it drains to 5% i saw 45%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

I was not aware of the fact one could use ringtones as alarms, this will suffice! Although I foresee some very awkward times as the sound does not stop once I respond to the reminder (it keeps going for good five - ten seconds after I "stop" the reminder), but it's better than missing it altogether!
Thank you very much!
Regarding the Alarmed app, doesn't it have to be running to actually remind you?
-Modular747: I don't know anyone who actually reads the terms of service agreement, those things are usually up to thirty, small print pages full of legal jargon. Rules, I do read - not the legal documents (also they often contradict the laws in my country, but that's a whole different story).
I agree with you - the average customer support consultant mostly cares about keeping his job and earning his salary (don't we all?) and thus racking up completted tasks (i.e. getting rid of customers as fast as possible - in a good mood). The "threat" none the less is real, if a cell phone causes me more trouble than it is worth, I will indeed throw it away (I have done so before) - and recommend a different brand to anyone willing to listen.
Don't get me wrong, I love Apple and I've been faithfully using and recommending their producs for twenty years now, not because of fanboyism, but because they earned it. This calendar issue, however, is like a toaster that doesn't automatically eject the toast at the set time. I see it as a major flaw and after googling around a bit I see that it's been around since at least 2007 (THAT'S SEVEN YEARS!!) so I strongly believe they are aware of this problem by now, but are choosing to ignore it for some mysterious reason and it really ****** me off.
I will send the feedback but based on my observations I suspect the Send button is merely a cleverly disguised Delete button.

I get a neighbor's wifi on my MacBook in my bedroom. How can I extend the range to the MacMini in my living room?

I get a neighbor's wifi on my MacBook in my bedroom. How can I extend the range to the MacMini in my living room?

You can't. It's not your network.

How can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?

how can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?

Only AppleTV1 has an internal PATA drive. The largest PATA drive available is 250gb.
Hacks are available to use the USB port on AppleTV1 to access more storage.
AppleTV2 does not have an internal drive.
Why do you need more storage in your AppleTV? iTunes streams video to AppleTV so no need to store it locally.

How can I extend the range of my chart?

I've asked this question before on here, and found that shift-clicking for more cells has usually worked, but I have now run into a new problem...
My chart used to cover the range B5:P50. However, since moving a column it now only covers the cell range H5:P50. My chart is on a separate sheet. Usually if I want to add more to the range it will be downwards, so I just click on the chart, then click on the Main Sheet and shift-click to add more cells. Unfortunately, because the range I want is to the left of the highlighted area this time, I can't use shift-click.
How can I extend the range of my chart so it includes cells to the left of the currently selected range? In Excel I'd be able to just type the range in a box somewhere, rather than all this GUI-based clicking and dragging which is actually more difficult! Is there somewhere I can just type the range in that I want?
Thanks!

"I want to add some series that are missing from the chart. How do I do that?"
Here's a two step process to do that:
Select the chart to show the the data selection on the associated chart.
Click in the leftmost column of the data, and drag left to change (move) the selection (blue arrow) for the result below:
Grab the control handle (small circle) at the bottom right corner of the selection, and drag right, as indicated by the blue arrow.
Result shown below.
Reassign colours and do other formatting as desired.
Regards,
Barry

HT1689 How can I extend the number of times my phone rings before going to answerphone

How can I extend the number of times my Iphone 4s rings before it goes to answerphone

Call you carrier and ask them how you can change this. The number of rings before voicemail kicks in is set by your carrier. Some have the option to do it from your phone if you know the sequence of codes to send, but you need to ask your own carrier how to do it for their system.

Upon Removing Ubuntu, How can I Extend the C and D Drive in Windows 7?

Upon Removing Ubuntu, How can I Extend the C and D Drive in Windows 7?
Previously, my Computer had Windows 7 and Ubuntu as a dual Boot. I followed some online instructions on how to Delete Grub (Ubuntu's Startup Boot Menu) and Ubuntu Partitions (<edited>) and it worked. I wanted to expand my remaining C and
D Partitions, but I couldn't figure out how to do it.
Windows 7's Disk Management shows my Laptop's only Disk divided into 3 logical drives ( i.e., the Recovery Drive, C, and D Drives). The Order of the Drives is Disk 0 is:
1.46 GB - Recovery Drive
53.71 GB - C Drive
42.79 GB - Free Space
191.19 GB - Drive for my Personal Data/Files
8.93 GB - Unallocated
NOTE: The Free Space and D Drive have a Green Box around them.
I would like to take the Free Space and Unallocated Space and apportion it between the C and D Drives., as stated prior, I'm not sure how to do this. Do you have any reliable and
preferably free options?

Hi Bobby Marlee,
Please share us a screenshot about disk management.
If my understanding is right, you want to extend the C and D drive by using the free space and unallocated space.
If you want to use Disk Management to extend the drive space, I think we need to back up the files and delete Free Space, Drive for my Personal Data/Files, and then extend C: drive and create D: drive by using the Unallocated space.
For more information, please refer to the following article.
http://technet.microsoft.com/zh-cn/library/cc771473.aspx#BKMK_WINUI
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

M from india, i purchase iphone 4s around 18 mnths ago. I was having 1 year warranty of 1 year that has been expired 6 months ago. Now how can i extend my iphone warranty. Please let me know about this. Thanks in advance..

M from india, i purchase iphone 4s around 18 mnths ago. I was having 1 year warranty of 1 year that has been expired 6 months ago. Now how can i extend my iphone warranty. Please let me know about this. Thanks in advance..

If you don't know the sender, then it is most likely a scam or spam email. I get them every day - I just delete them. I also get daily notices from Facebook or someone called Adriana at Facebook even though i do not have an account there. Can't do anything about it - just delete it.

How can i extend the customer to other sales area

how can i extend the customer to other sales area

Hello Harish,
Once you have a customer (eg. 100002) in one sales area (eg. 0010/10/10), you open XD01 tcode, enter the same customer number (100002) in customer field and enter sales area (say u want to create in 0020/10/10) in which you want to create the same customer. Now in Reference section, enter the customer number (100002) and sales area in which already the customer exists (0010/10/10). When you press enter, it allows you to modify the sales area data for the customer for new sales area.
then save it.
Hope it is clear...

Hi,how can i change language in new lion?i need from english,to the czech know anyone?thanks

hi,how can i change language in new lion?i need from english,to the czech know anyone?thanks

If you are talking about the menus and dialogues, go to system prefs/language & text/language and move Czech to the top of the list and then logout/login.
If you are talking about the keyboard, let us know.

How can I extend the MRP Areas?

How can I extend the MRP Areas of a material for different warehouses by LSMW? Is there a specific field for it?

Ok, this is how my recording is built up (it ends with the same screen from the start):
RMMDDIBE 1000
    BDC_CURSOR                     SO_WERKS-LOW
    BDC_OKCODE                     =UCOMM4
    SO_MATNR-LOW                                        MATNR                matnr
    SO_WERKS-LOW                                        WERKS                plant
    BDC_SUBSCR                     RMMDDIBE
RMMDDIBE 1000
    BDC_OKCODE                     =CMDM
    SO_MATNR-LOW                                        MATNR                matnr
    SO_WERKS-LOW                                        WERKS                plant
    BDC_SUBSCR                     RMMDDIBE
    BDC_CURSOR                     SO_BERID-LOW
    PANE                           X
    SO_BERID-LOW                                        MRP_AREA             mrp_area
RMMDDIBE 0101
    BDC_CURSOR                     SDIBE_MASSFIELDS-XLGP
    BDC_OKCODE                     =SAVE
    SDIBE_MASSFIELDS-XDISGR        X
    MDMA-DISGR                                          DISGR                MRP_group
    SDIBE_MASSFIELDS-XDISMM        X
    MDMA-DISMM                                          DISMM                planningskenmerk
    SDIBE_MASSFIELDS-XMINBE        X
    MDMA-MINBE                                          MINBE                bestelpunt
    SDIBE_MASSFIELDS-XDISPO        X
    MDMA-DISPO                                          DISPO                Mrp controller
    SDIBE_MASSFIELDS-XDISLS        X
    MDMA-DISLS                                          DISLS                lotzsize
    SDIBE_MASSFIELDS-XBSTFE        X
    MDMA-BSTFE                                          BSTFE                fixed lotsize
    SDIBE_MASSFIELDS-XSOBSL        X
    MDMA-SOBSL                                          SOBSL                special procurement key
    SDIBE_MASSFIELDS-XLGPRO        X
    MDMA-LGPRO                                          LGPRO                issueing storage loc
    SDIBE_MASSFIELDS-XLGFSB        X
    MDMA-LGFSB                                          LGFSB                stor location external procurement
    SDIBE_MASSFIELDS-XPLIFZ        X
    MDMA-PLIFZ                                          PFLITZ               planlevertrijd
    MDMA-PLIFZX                    X
RMMDDIBE 1000
    BDC_CURSOR                     PA_PROSA
    BDC_OKCODE                     =ONLI
    SO_MATNR-LOW                                        MATNR                Matnr
    SO_WERKS-LOW                                        WERKS                plant
    PA_PROSA                       X
    BDC_SUBSCR                     RMMDDIBE
    PANE                           X
    SO_BERID-LOW                                        MRP_AREA             mrp_area

How can I extend language support in Portal

Similar Messages

Maybe you are looking for