How can i extend the library of software instruments in logic?
Hello!
I am working with logic express 8 and would like to assign software instruments such as clarinet and celli to the midi-files of my keyboard. Yesterday I couldn't find woodwind instruments in the library of logic so I started to download mainstage 2 - which seemed to extend the library of logic. But unfortunately some software instruments (for example cello...) disappeared and instead of extending my library in logic mainstage made it smaller... Can anybody help? And can someone tell my where do I get a clarinet and a cello? Thanks for your answers!
Yours Judith.
P.S.: I thought about maybe I have to upgrade my version of logic express to logic studio? How can I do this and do I have to pay the full prize of logic studio then? Sorry for my nescience! :-)
Hi..
Best place to get feedback for Logic Pro is the Logic Pro community.
Post your topic here.
That way you will receive feedback directly from LP users. This forum is for the most part, troubleshooting the App Store.
Similar Messages
-
Upon Removing Ubuntu, How can I Extend the C and D Drive in Windows 7?
Upon Removing Ubuntu, How can I Extend the C and D Drive in Windows 7?
Previously, my Computer had Windows 7 and Ubuntu as a dual Boot. I followed some online instructions on how to Delete Grub (Ubuntu's Startup Boot Menu) and Ubuntu Partitions (<edited>) and it worked. I wanted to expand my remaining C and
D Partitions, but I couldn't figure out how to do it.
Windows 7's Disk Management shows my Laptop's only Disk divided into 3 logical drives ( i.e., the Recovery Drive, C, and D Drives). The Order of the Drives is Disk 0 is:
1.46 GB - Recovery Drive
53.71 GB - C Drive
42.79 GB - Free Space
191.19 GB - Drive for my Personal Data/Files
8.93 GB - Unallocated
NOTE: The Free Space and D Drive have a Green Box around them.
I would like to take the Free Space and Unallocated Space and apportion it between the C and D Drives., as stated prior, I'm not sure how to do this. Do you have any reliable and
preferably free options?Hi Bobby Marlee,
Please share us a screenshot about disk management.
If my understanding is right, you want to extend the C and D drive by using the free space and unallocated space.
If you want to use Disk Management to extend the drive space, I think we need to back up the files and delete Free Space, Drive for my Personal Data/Files, and then extend C: drive and create D: drive by using the Unallocated space.
For more information, please refer to the following article.
http://technet.microsoft.com/zh-cn/library/cc771473.aspx#BKMK_WINUI
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
I get a neighbor's wifi on my MacBook in my bedroom. How can I extend the range to the MacMini in my living room?
You can't. It's not your network.
-
I have the computer that holds my itunes library. However, I no longer have access to the email account (and therefore apple account) it was set up with so can't sync/update etc. How can I transfer the library to my new apple id? Any help gratefully received as searched the internet but can't find the answer!
Have ipod touch 4th gen, ipod touch 5th gen and ipod nano 7th gen all to sync to library.Hi Stillme,
You cannot transfer purchases from one Apple ID to another. You need to go into the old Apple ID and change it to the new email address instead of using a new Apple ID altogether.
Apple - My Apple ID
If you can't remember the password to the old ID, then click on Reset your Password, and answer the Security Questions. If you can't remember the Security Questions, contact iTunes Support and have them reset:
APPLE ID SECURITY CONTACT NUMBERS
Once you get into your old account, Edit the Apple ID to your new email address. Before you will be able to do that you are going to have to change the email address on the new Apple ID to something else.
Cheers,
GB -
how can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?
Only AppleTV1 has an internal PATA drive. The largest PATA drive available is 250gb.
Hacks are available to use the USB port on AppleTV1 to access more storage.
AppleTV2 does not have an internal drive.
Why do you need more storage in your AppleTV? iTunes streams video to AppleTV so no need to store it locally. -
How can I extend the range of my chart?
I've asked this question before on here, and found that shift-clicking for more cells has usually worked, but I have now run into a new problem...
My chart used to cover the range B5:P50. However, since moving a column it now only covers the cell range H5:P50. My chart is on a separate sheet. Usually if I want to add more to the range it will be downwards, so I just click on the chart, then click on the Main Sheet and shift-click to add more cells. Unfortunately, because the range I want is to the left of the highlighted area this time, I can't use shift-click.
How can I extend the range of my chart so it includes cells to the left of the currently selected range? In Excel I'd be able to just type the range in a box somewhere, rather than all this GUI-based clicking and dragging which is actually more difficult! Is there somewhere I can just type the range in that I want?
Thanks!"I want to add some series that are missing from the chart. How do I do that?"
Here's a two step process to do that:
Select the chart to show the the data selection on the associated chart.
Click in the leftmost column of the data, and drag left to change (move) the selection (blue arrow) for the result below:
Grab the control handle (small circle) at the bottom right corner of the selection, and drag right, as indicated by the blue arrow.
Result shown below.
Reassign colours and do other formatting as desired.
Regards,
Barry -
HT1689 How can I extend the number of times my phone rings before going to answerphone
How can I extend the number of times my Iphone 4s rings before it goes to answerphone
Call you carrier and ask them how you can change this. The number of rings before voicemail kicks in is set by your carrier. Some have the option to do it from your phone if you know the sequence of codes to send, but you need to ask your own carrier how to do it for their system.
-
How can i extend the customer to other sales area
how can i extend the customer to other sales area
Hello Harish,
Once you have a customer (eg. 100002) in one sales area (eg. 0010/10/10), you open XD01 tcode, enter the same customer number (100002) in customer field and enter sales area (say u want to create in 0020/10/10) in which you want to create the same customer. Now in Reference section, enter the customer number (100002) and sales area in which already the customer exists (0010/10/10). When you press enter, it allows you to modify the sales area data for the customer for new sales area.
then save it.
Hope it is clear... -
How can I extend the MRP Areas?
How can I extend the MRP Areas of a material for different warehouses by LSMW? Is there a specific field for it?
Ok, this is how my recording is built up (it ends with the same screen from the start):
RMMDDIBE 1000
BDC_CURSOR SO_WERKS-LOW
BDC_OKCODE =UCOMM4
SO_MATNR-LOW MATNR matnr
SO_WERKS-LOW WERKS plant
BDC_SUBSCR RMMDDIBE
RMMDDIBE 1000
BDC_OKCODE =CMDM
SO_MATNR-LOW MATNR matnr
SO_WERKS-LOW WERKS plant
BDC_SUBSCR RMMDDIBE
BDC_CURSOR SO_BERID-LOW
PANE X
SO_BERID-LOW MRP_AREA mrp_area
RMMDDIBE 0101
BDC_CURSOR SDIBE_MASSFIELDS-XLGP
BDC_OKCODE =SAVE
SDIBE_MASSFIELDS-XDISGR X
MDMA-DISGR DISGR MRP_group
SDIBE_MASSFIELDS-XDISMM X
MDMA-DISMM DISMM planningskenmerk
SDIBE_MASSFIELDS-XMINBE X
MDMA-MINBE MINBE bestelpunt
SDIBE_MASSFIELDS-XDISPO X
MDMA-DISPO DISPO Mrp controller
SDIBE_MASSFIELDS-XDISLS X
MDMA-DISLS DISLS lotzsize
SDIBE_MASSFIELDS-XBSTFE X
MDMA-BSTFE BSTFE fixed lotsize
SDIBE_MASSFIELDS-XSOBSL X
MDMA-SOBSL SOBSL special procurement key
SDIBE_MASSFIELDS-XLGPRO X
MDMA-LGPRO LGPRO issueing storage loc
SDIBE_MASSFIELDS-XLGFSB X
MDMA-LGFSB LGFSB stor location external procurement
SDIBE_MASSFIELDS-XPLIFZ X
MDMA-PLIFZ PFLITZ planlevertrijd
MDMA-PLIFZX X
RMMDDIBE 1000
BDC_CURSOR PA_PROSA
BDC_OKCODE =ONLI
SO_MATNR-LOW MATNR Matnr
SO_WERKS-LOW WERKS plant
PA_PROSA X
BDC_SUBSCR RMMDDIBE
PANE X
SO_BERID-LOW MRP_AREA mrp_area -
How can I extend the 2-year search window of Calendar search
How can I extend the 2-year search window of Calendar search in iPhone 5s ? I basically want 'Search' to search everything in the phone, not just restricted to a 2-year window.
See my link above... it's a documented limitation...
Calendar and Reminder search
Spotlight searches for the title of calendar events and reminders in a two-year window—it will reveal results from one year in the past and one year in the future. If an event has recurrences that fall in this range, it will find the event that is closest to the current date.
If multiple events have similar details (title, notes, location, and so on) and you search for these details, Spotlight will show the most recent event. To see more results, use search in Calendar or Reminders. -
I dont have a credit card how can i buy the adobe photoshop software without it
i dont have a credit card how can i buy the adobe photoshop software without it
You could use a pre-paid debrt card. and purchase a one year prepaid plan for $120.
Prepaid
Payment
You will be charged the fees stated at the time of purchase. As soon as we have received full payment, your paid membership will begin.
Renewal
The price is valid for a full 12 months. After that, we'll renew your contract automatically unless you cancel. The price is subject to change, but we will always notify you beforehand.
Cancellation
We'd hate to see you go, but if you cancel within the first 30 days, we'll give you a full refund. If you ever need to cancel, just call Customer Support. -
My time capsule backup space is full yet, how can i extend the backup space?
how can i extend the backup space?
Two possibilities:
Add a new USB hard drive to the Time Capsule and start a new full backup and move forward from that point.
(Unfortunately, it is not possible to have Time Machine simply continue backups on a new drive. You have to start over with a new full backup.)
Or, if you decide that you really do not need all the old backups on the Time Capsule, the disk can be erased and you can start over with a new full backup and move forward. -
How can i extend the battery life of my iphone 4s? when i left 50% it in standby mode when i saw in 5hours it drains to 5% i saw 45%, i thought when i leave the phone the percent is still the same. whant am i goin to do?
I was not aware of the fact one could use ringtones as alarms, this will suffice! Although I foresee some very awkward times as the sound does not stop once I respond to the reminder (it keeps going for good five - ten seconds after I "stop" the reminder), but it's better than missing it altogether!
Thank you very much!
Regarding the Alarmed app, doesn't it have to be running to actually remind you?
-Modular747: I don't know anyone who actually reads the terms of service agreement, those things are usually up to thirty, small print pages full of legal jargon. Rules, I do read - not the legal documents (also they often contradict the laws in my country, but that's a whole different story).
I agree with you - the average customer support consultant mostly cares about keeping his job and earning his salary (don't we all?) and thus racking up completted tasks (i.e. getting rid of customers as fast as possible - in a good mood). The "threat" none the less is real, if a cell phone causes me more trouble than it is worth, I will indeed throw it away (I have done so before) - and recommend a different brand to anyone willing to listen.
Don't get me wrong, I love Apple and I've been faithfully using and recommending their producs for twenty years now, not because of fanboyism, but because they earned it. This calendar issue, however, is like a toaster that doesn't automatically eject the toast at the set time. I see it as a major flaw and after googling around a bit I see that it's been around since at least 2007 (THAT'S SEVEN YEARS!!) so I strongly believe they are aware of this problem by now, but are choosing to ignore it for some mysterious reason and it really ****** me off.
I will send the feedback but based on my observations I suspect the Send button is merely a cleverly disguised Delete button. -
How can i extend the table control while transfering the data
hi
how can i extend the table control while transfering the data.Hi,
For table control we have to handle the page down (P+, or what ever function codes are assigned to that activity) activity with our coding.
Just check out this code:
This is the bdc to update the XK01 transaction code (Vendor Creation).
Here we will use table controls for bankings. Here Iam sending the coding and text files.
Coding
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'. " Page down activity
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
**Flat files for the above code***
Intial screen data file.
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
Table control Data:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Kumar. -
How can I extend the wireless range on my BT Hub 3
I currently have the BT hub 3 and find that as I have quite a rambling house and the broadband is located at one side rather than in the middle of the house I cannot get a signal in all areas. This is massively frustration for the children when they wish to do their homework in the peace of their own rooms - how can I extend the range, without having to pay through the nose, but easy enough for someone who is not massively technical? - Thanks in advance
There are a number of options on my website.
Wireless connection problems
and
Network connection problems and possible solutions
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Maybe you are looking for
-
Creating Support Messages from Satellite System without SolMan user account
Hi We are having some problems with users "creating support message" from our ECC system to SolMan, if the user does not have a user account in Solution Manager. It is not correct, that users from Satellite systems can create support messages from t
-
How to create a SEQUENCE in MSSQL2005
Hi I am also having a similar problem which opened the thread Actually i am using a Repositery which is created in MSSQL2005. Now i want to create a SEQUENCE similar to Oracle and populate My surrogate Key Column. Can u tell me how to create a SEQUEN
-
I have 2.2.1 installed on my 8GB 3G model and I'm trying to backup my iPhone but it is taking a ridiculous amount of time. I let it go this morning for 5 hours and it still only progressed half of the status bar. I've tried for several days now and e
-
TO_CHAR function and Node Cost in the explain plan
I have a join as below in the sql - TO_CHAR(A_COL) = B_COL A_COL = Integer and B_COL is Varchar So when I ran the sql with TO_CHAR the node cost was huge. But when I run the sql wihtout TO_CHAR which is A_COL = B_COL, the node_cost dropped a lot. On
-
Dynamically update 'title' attribute
Hopefully someone can point me in the right direction. I want to create a dynmic "tooltip" for an imagemap. I'lll need to pass a variable to a call on a seperate cfm template to find the price of an item the user hovers over. There is the CFTOOLTIP