How can I factory restore my phone if I forgot the password.

I bought a phone at a Fleamarket and it has a password on it and I tied to do the reset on the computer but it won't reset it.

Ah, that's a different problem. That means that the phone was probably jailbroken. It may not be possible to restore it, but you can try using DFU mode. If this doesn't work after 3 tries the phone is probably unrecoverable.
DFU mode:
Install the latest version of iTunes on your computer if it isn't there already
Reboot your computer
Disable any antivirus and firewalls
Launch iTunes
Connect the device cable to a USB port on the computer (not to a USB hub), but DO NOT CONNECT TO THE DEVICE YET
Press and hold the HOME and SLEEP buttons at the same time for exactly 10 seconds, until the screen turns black, then release the SLEEP button but continue holding the HOME button. If an Apple logo appears while holding both buttons you held for too long; start over.
While still holding the HOME button connect the other end of the cable to the device
You should see a message in iTunes saying a phone in Recovery mode has been detected. When you see that message release the HOME button and the device should restore.

Similar Messages

  • How can i factory reset my ipad if i forgot the password to reset it in settings

    Forgot the password to allow me to factory reset my ipad

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How can i delet my iclound account cause i forgot the password..its my other iphone

    how can i delet icloud account.and put a new icloud account.because the old icloud account i dont know the password i forgot even my emaill password

    Do you remember your answers to the account's security questions ? If you do then you can answer them to reset it : http://iforgot.apple.com
    If not and if you can't get access to its email account then try contacting Support in your country, after they've confirmed your id and that it's your account they should be able to reset it.
    Contacting Apple about account security : Contact Apple for help with Apple ID account security
    If your country isn't on that page then try this form to contact Support :  https://www.apple.com/emea/support/itunes/contact.html

  • How can I turn off Guided Access if I forgot the Password?

    One of my students with Autism turned on Guided Access on my iPad2 and I do not know how to log off without knowing the password.  Please help!

    I found out the password!

  • HT201210 how can i unlock my i phone if i forgot my password?

    how do I unlock my iphone if I forgot password?

    You have to restore with the computer you usually sync with.
    Forgot Passcode use recovery mode to restore
    http://support.apple.com/kb/HT1808

  • HT201210 why can't i restore my ipad? i forgot the password and now i can't use it and apple won't give me access.

    Help.

    Try and force your iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.

  • How can i factory unlock my phone.....

    how can i factory unlock my phone.

    As always, contact the original cellular provider to determine their unlocking policy, and if you qualify.

  • How can i factory restore my imac?

    how can i factory restore my imac? i have already done a backup of my files

    Use its original disks to erase the drive and install an OS.
    (58714)

  • I had to restore my iPod because I forgot the password, like how santa forgot about me. And I didn't set up a Backup. SO I sort of lost everything. But I'm wondering if I can somehow get my pictures back from somewhere. PLEASE HELP ME. Thanks

    I had to restore my iPod because I forgot the password, like how santa forgot about me. And I didn't set up a Backup. SO I sort of lost everything. But I'm wondering if I can somehow get my pictures back from somewhere. PLEASE HELP ME. Thanks

    - If you used PhotoStream then try getting some of them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer
    - Maybe from the restored iPod via
    How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
    http://www.amacsoft.com/ipod-data-recovery.html

  • How can i unlock my phone when i forgot the password

    How can i unlock my phone if i forgot the password?

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Can I factory restore an IMAC Late 2009 without the orginal DVD's?

    Can I factory restore an IMAC Late 2009 without the orginal DVD's? I was given a computer and want to remove the previous owners user login and passwords. I want a fresh install like it was bought new.

    You can create a new Admin User in System Preferences then delete the current User. This will give you a clean User but the base system files might have extensions etc installed.
    If you upgrade to Mavericks, then you would wipe the computer giving you exactly what you want.
    While your computer might meet the requirements, also check your applications for Mavericks compatibility here:  http://roaringapps.com/
    Make sure all your software like Microsoft Office and Adobe CS Suites is compatible with Mavericks.
    OS X Mavericks: System Requirements
    To install Mavericks, you need one of these Macs:
              ▪          iMac (Mid-2007 or later)
              ▪          MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
              ▪          MacBook Pro (13-inch, Mid-2009 or later),
              ▪          MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
              ▪          MacBook Air (Late 2008 or later)
              ▪          Mac mini (Early 2009 or later)
              ▪          Mac Pro (Early 2008 or later)
              ▪          Xserve (Early 2009)
    Your Mac also needs:
              ▪          OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
              ▪          2 GB or more of memory  <--- I suggest 4GB as minimum
              ▪          8 GB or more of available space

  • HT4061 how can i unlock my iphone 4s because i forgot my password and dont rember my e-mail adress either please help me

    how can i unlock my iphone 4s because i forgot my password and dont know the e-mail that i used wen i bought it please help me

    See this http://support.apple.com/kb/ht1212, but if that doesn't help, the only other way to get past this is to restore the phone on the computer you normally sync with to your latest backup. This will remove the passcode.

  • How do I unlock my phone if I forgot the password?

    How do I unlock my phone if I forgot the password?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • How can i fix my disabled ipod on itunes without the password?

    How can I fix my disabled ipod on itunes without the password?

    See Here
    http://support.apple.com/kb/HT1808
    If you cannot remember the passcode, you will need to restore your device on the computer that you Usually Sync with...
    Wrong Pass Code
    http://support.apple.com/kb/HT1212

  • HT1349 How can i get into my iPad when i forgot my password?

    How can i get into my ipad when i forgot my password?

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

Maybe you are looking for

  • ALV report in BSP

    Hello, What are my options for reporting tools in a BSP application? In our BSP project, we don't have the option for BW currently (not supported by compnay) so I am looking into ALV reporting. Is there any way we can integrate the two? It seems that

  • Windows 8.1/Server 2012 R2 Exams - EFFECTIVE DATE ADJUSTED!

    Hi, everyone. Microsoft has adjusted the effective starting date of when the Windows 8.0 exams and Windows Server 2012 exams will be updated to Windows 8.1 and Windows Server 2012 R2 at Prometric. The new effective date is January 28, 2014. This mean

  • Xorg.conf jagged fonts

    I am running an nvidia graphics card with twinview to support dual monitors.  I used "nvidia --config" to get my xorg.conf file and then manually created 10-monitor.  If fonts in the xorg sever are rendered jaggedly, is that likely to be a xorg.conf

  • How to get last row and sum of all columns in one query

    Hi , is there a way to get last record for a column and sum of all record for another column in the same query. Best Regards ,

  • Deactivation of insp. type

    dears i have activated insp. type 01 for a raw material and have so many lots.now i want to deactivate insp. for that material.but a warning message issued 'To deactivate QM, the inspection stock for the material must be empty" so what should i do so