How can I fill the field ITXNR

Hi Gurus,
I am in a tight spot here.
Let's say I am loading data into HRP1000 {Objects Infotype}
using LSMW.
I have done the recording.
Source fields are OTYPE OBJID STEXT SHORT
Now, I am assumiing that field ITXNR in HRP1000 can be used to fill it with some legacy number.
can it be used???? Please enlighten me on this.
I would like to know how ITXNR can be filled. Should or can it be assigned any No. ranges???
Or shall I supply No.s from my excel sheet to it ; so that I will be able to extract the OBJID's generated for the legacy Numbers.
ITXNR is not there in my recording though. But it need to fill it.
Please provide me inputs. My OM migration kinda depends on this now.
warm regards,
Hari Kiran

Thanks a ton for the answer andy.
Been waiting for it for so long.
I dont see much difference between HRP1000 and HRP1002.
Both have ITXNR.
Please enlighten me.
Basically, I have first loaded data into HRP1000.
then I gave my BIW team the OBID's generated.
Based on that they gave me the flat file for Relationships Infotype.
Now they dont know how to prepare the flat file for Work schedule.
So, they are saying they will provide me with a sequence number in the excel sheet and and i should be able to give them the OBJID generated for the corresponding sequence number in the excel sheet.
Confusing!!! ya it is to me too.
Any input is appreciated.
regards,
Hari

Similar Messages

How can I use the field "Sales Order" on derivation?

Dear All.
This is about PA characteristic derivation.
I want to change the characteristic value "Sales Order (KAUFN)" by derivation.
But I cannot select the characteristic field on target field.
The field "Sales order(KAUFN)" doesn't exist there.
Why? How can I use the field "Sales Order" on derivation?
Y.C.Bae

Hi Bae,
in order to be able to choose fields KAUFN (for sales order) and KDPOS
(for sales order item) as target fields of derivation step 'enhancement'
you have to modify the coding of subroutine EXIT GET_ALLOWED_TARGETS
in program RKEDRCOPA like this:
    NAME-IDENTIFIER = 'CO-PA'.
    NAME-TABNAME = FIELDTAB_ENTRY-TABNAME.
    NAME-FIELDNAME = FIELDTAB_ENTRY-FIELDNAME.
    IF FIELDTAB_ENTRY-USGFL CA 'DUV'
BEGIN OF INSERTION *****
         OR FIELDTAB_ENTRY-FIELDNAME = 'KAUFN'
         OR FIELDTAB_ENTRY-FIELDNAME = 'KDPOS'
END   OF INSERTION *****
         OR FIELDTAB_ENTRY-FIELDNAME = 'KNDNR'
         OR FIELDTAB_ENTRY-FIELDNAME = 'ARTNR'
Actually sales order number and sales order item shouldn't be changed
by derivation (therefore they are no valid target fields in standard)
but if you need to fill them within an enhancement this modification
will help you to define them as valid target fields. But this is just
the technical frame so far; the logic from which table you'd like to
derive the sales order number correctly depends on your implementation
of the enhancement! I just want to ask you to be rather careful with
the implementation of the exit so that the sales order number isn't
changed in cases that shouldn't be concerned.
Regards,
Abhisek

How can I set the field ICt in component table of the Tasklist as "Input" ?

Hi experts,
How can I set the field ICt (BOM's Item Category (POSTP)) in component table of the Tasklist as "Input" Status (The system is in gray now).
I can define the different Category value by IB01 or IB02,then I can select them at the Tasklist's component table.But sometimes I need batch input such as LSMW,so pls kindly tell me how to setup it,thanks!
Yinjun

Hi,
BOM is created with some component and item category.
In task list when you go to component, in normal case one selects and copies BOM over there by clicking component selection button.
Once BOM is copied over there the BOM item category will get copied. As it is BOM item category in Task list it is greyed and it will get copied automatically from BOM.
You specify item category required by you in IB01 or IB02 and then use that BOM in task list. Go to componenet tab and click component selection button. Once BOM is copied over there the BOM item category will get copied

To create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.

to create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.

You need to be in a country to use its store - if you are not in the US with a US billing address then you cannot use the US store.
From the US store's terms of use :
The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.

How can i find the fields for &DOPOS_CPY-WRBT1(I13.0)&

Hi All,
In sapscripts, what is the meaning for (13.0)?
how can i find the fields for &DOPOS_CPY-WRBT1(I13.0)&?
Thanks.

meaning for (13.0) is write to form this variable's 13 character non decimal and 0 character decimal places.
shortly not write decimal places.
DOPOS_CPY-WRBT1 is exist in form caller program. check in abap program not in sapscript.
take care
Çağatay

How can I keep the field in the same page

How can I keep the field in master frame in the same page of the detail frame?
They are in the different pages sometimes?
Thank you.

I believe the OP has a question similar to mine...
I have several groups, and the master for each group is only one line, and the detail is between 1 and five lines, like so:
A
A1
A2
B
B1
C
C1
C2
C3
...The problem is, sometimes only the master record gets printed at the bottom of the page, and then the detail is printed at the top of the next page. I don't need each group on it's own page. I just want to be sure that if the detail can't fit on the page with the master, then I want the master to only print on the next page.
Can you help with this?

How can i fill the iTunes Connect ITIN?

Hi,
i am trying to sell the book on iBookstore but i can't find tge way how can i fill the ITIN on form.
i am living in istanbul.
i am non-US person.
Any idea?
Any help?
Thanks.

You would need to try to contact support for content providers, the standard support system at apple wouldn't be able to help much with this as they pretty much handle the consumer end of support and not the provider/developer, Only support for that I could find is available at http://www.apple.com/itunes/content-providers/

How can i validate the field directline under personal information of ESS?

Hi all,
How can i validate the field directline under personal information--> communication data of ESS?The thing is we don't have NWDI setup in our organization.Is there any possibility of doing it under SPRO trn.
Thanks and Regards,
sam

Hi,
This is probably a wrong forum that you have posted your question to.
Regards,
Siddhesh

How can we get the field details from bapi

I am having one BAPI_BCA_ACCOUNTAM_GET_LIST
There is BAPIBCA_DTE_BANKKEY one structure inside the above BAPI.
From this I need to retrive BANK_CODE and ACCOUNT_NUMBER fileds.
How can I write the code for this retriving data.

In which SAP version you are working on? It doesn't exist in my system ECC 6

How can i fill the billing address

I can't fill the billing address! I can't accept that!

You can viee the billions my address on your account by logging into the accontunt's nt via the Store > View Account menu option on your computer's iTunes, or via the 'manage your apple id' button on http://appleid.apple.com
But the email may be a phishing email : Identifying fraudulent "phishing" email
t

How can i modify the field on standard vbak table

Hi Experts,
I have to change the flag of (vbak-faksk) vbak table from 23 to 24 for selected records.how can i include the bdc program here in my logic.
thanks
suri.

Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
BDC
http://www.sap-img.com/bdc.htm
Rewards if useful..............
Minal

How to fill the field ITXNR??

Hi Gurus,
I am in a tight spot here.
Let's say I am loading data into HRP1000 {Objects Infotype}
using LSMW.
I have done the recording.
Source fields are OTYPE OBJID STEXT SHORT
Now, I am assumiing that field ITXNR in HRP1000 can be used to fill it with some legacy number.
can it be used???? Please enlighten me on this.
I would like to know how ITXNR can be filled. Should or can it be assigned any No. ranges???
Or shall I supply No.s from my excel sheet to it ; so that I will be able to extract the OBJID's generated for the legacy Numbers.
ITXNR is not there in my recording though. But it needs to be filled.
Please provide me inputs.
warm regards,
Hari Kiran

waiting for inputs ...

How can i post the fields in the screen by selecting a record

Hi,
I have a problem in dialog programming.
I need to populate the fields in the screen by selecting a single record.
For example,
    Screen consists of 'CARRID, CONNID,FLDATE... fields.
    By pressing F4 in CARRID field it will display the contents from database table and display the records. If i select the record LH 0400 ... record then automatically the connid field should fill with the contents of the record i.e., 0400 and similarly the remaining fields.
   How can i do this in dialog programming?
   I tried with F4IF_INT_table_.. function module. There is a table parameter DYNmapping. But dont know how to use it? Can any body explain me how to use it?
   Thanks in advance..
   Suvan

Hi Vinod,
Thanks for your reply. I solved my problem. It is working with the table parameter 'DYNPFLD_MAPPING' in the function module 'F4IF_INT_TABLE_VALUE_REQUEST'.
With your logic we can't decide which record is selected. Because there can be multiple records for a single CARRID.
My question is how to post the entire record into the screen fields at a time? It is possible with the parameter I specified inthe above said function module.
With dictionary reference it will fetch the entire entries from the Check table.
Thanks again for your co-operation.
Suvan.<b></b>

How can I customise the fields shown in the main Thunderbird address book window?

When I click the odd-looking icon (a book with an arrow?) at the top of the vertical slider, I get a list of only 13 fields. I can display, hide and rearrange these fields. But I cannot see how to access any of the other fields in the address book, which I would prefer to see in the main window.
(I know the fields are there because, yes, I can see these fields for individual entries. Also they appear in an exported csv file.)

Quit Address Book then delete ~/Library/Application Support/AddressBook/AddressBook-v22.abcddb - it will be rebuilt from data in the ~/Library/Application Support/AddressBook/Metadata folder.
AK

How can i read the field name in the internal table

Hi friends
i want to read the internal table filed name.
my requirement is like this:
data: begin of t_header occurs 0,
       extno(12),
       priotiy(5),
       ecnumber(10).
      end of t_header.
loop at t_header.
if the field name is priority i want to write some other
logic here.....
endloop.
Please tell me how can i do this.

data: wf_fld_cat type slis_t_fieldcat_alv .
data: wf_repid like sy-repid .
data: int_tab_name type slis_tabname .
move: sy-repid to wf_repid ,
        'INT_OUTPUT' to int_tab_name .
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
   exporting
     i_program_name              = wf_repid
     i_internal_tabname          = int_tab_name
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
    i_inclname                   = wf_repid
    i_bypassing_buffer           = 'X'
I_BUFFER_ACTIVE              =
    changing
      ct_fieldcat                  = wf_fld_cat[]
   exceptions
     inconsistent_interface       = 1
     program_error                = 2
     others                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
wf_fld_cat[] will hold the itab definition.
Regards
Raja

How can I fill the field ITXNR

Similar Messages

Maybe you are looking for