How can I Final cut studio 5.1 running on osx lion

I have a old version (Final Cut Studio 5.1) and I would like to use with OSX lion. How can I make that run, don´t want to downgrade!!!!!

I want a brand new Jaguar and a 4000 acre ranch in Wyoming.  But just like in your case, it ain't gonna happen.
You'll either need to upgrade the software or downgrade the OS.
-DH
ps: for future reference, the Final Cut Studio forum is located here: https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
This is the FCP-X forum.

Similar Messages

  • How can Install Final Cut Studio in my Mac Pro Early 2009 ??

    I have Final Cut Studio 7  NOT installed yet and Mac Pro Early 2009 with  OSX  10.9.5. I have Final Cut Pro X  Version  10.1.4 installed. Can I installed Final Cut Studio here together with  FCPX ?? Maybe not. What is the best way to install FCP Studio??
    Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ??   10.6,  10.7,  10.8, 10.9  ??
    Thanks for any help I can get
    Alberto Marban

    Here is the Best Practice Guidelines from Apple:
    Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
    MtD

  • Anyone know how to uninstall Final Cut Studio?

    I've attempted 3 installs and at the very end it says there were errors (of course, it doesn't say what errors), and to try again. Well, after 20+ hrs. into this I think it's time to start with a clean slate. But I can't find anything online on how to uninstall Final Cut Studio. I found several links to some mysterious document 93150, but apple's site doesn't have it anymore. Yeah, my luck.
    If anyone could help me on this, you're sure to get lots of good karma this weekend, maybe even into the week.
    thanks,
    -w

    Yeah, the Knowledge Base documents to uninstall FCP 4 or higher no longer exist. (only the doc for FCP 3 exists) That being said, the Troubleshooting Basics for Final Cut Pro 5 document does detail how to trash receipts and reinstall. Haven't needed to try it myself (knocking on wood) but I take it you've have and it still hasn't worked out for you?
    What, exactly, is prompting all of these installs?

  • How can register, final cut pro X?

    How can register, final cut pro X?
    Which is the right way to do this.
    Thanks

    As innocentius says, you should already be registered.
    When you put in your Apple id info prior to downloading, you are automatically registering the application.
    Andy

  • Is Final Cut Studio version 3 compatible with OSX Mountain Lion?

    Is Final Cut Studio version 3 compatible with OSX Mountain Lion?

    Do a search on this forum, there are numerous ones, some with issues some without.
    DM

  • How can I get a display of all running programs in lion like I used to get when I did a 4 finger swipe in snow leopard?

    how can I get a display of all running programs in lion like I used to get when I did a 4 finger swipe in snow leopard?
    I liked to turn off running programs without a window that I was no longer using
    thanks.
    Best I can do now is to open the "force quit" window and click on programs I want to stop and then send each one a "command-Q" and then repeat as necessary
    Jeff

    Command + Tab is what you are after i think

  • General Overview on How to use Final Cut Studio to create a Blu-Ray DVD

    I am a new user of Final Cut Studio and need an experienced user to give my a progression guide on how to create a Blu-Ray DVD of my recent Alaska Trip. Last month I spend 8 days in Alaska visiting Denali and Juneau primarily. During that time I took about 100 short video clips (HD 1080p) and 570+ still photos with my Canon 7D. I have experimented with some pieces of the software and have created a Blu-Ray disk using Final Cut Pro and Compressor. However my goal is to create this DVD with menus that will play short clips (some narrated) and still photos(also some narration). I did a short one in DVD Studio Pro this morning but need some general guidance on what progression and programs to use to create this project. I was not able to take my video from the Studio Pro Sequence I created for my 1st DVD I had to take the original clips which were processed using Apple ProRes 422 and copy them in one at a time and then find the audio (on the voice overs) I created and also place them into DVD Studio Pro one at a time. I obviously need some guidance on the proper progression.
    Any help would be greatly appreciated.

    Here's the situation...
    DVD Studio Pro will not do the trick for you - it doesn't do blu-ray discs. If you want to do Blu-ray you've got to use either Final Cut Pro's "Export" command or Compressor's "Burn Blu-ray disc" template. The downside to both of these approaches is that you can't burn more than one title (or movie, etc.) using Final Cut Studio.
    To do what you want to do, you need Toast (at least). Toast will auto-generate menus but will let you put more than one title per slide (so you can put multiple slideshows on the same disc).
    If you want to do full-on customizing of menus and multi-level menus, for that you need Adobe's Encore.
    My suggestion - Get Toast. Encore is close to $800.
    Here's your progression (at least the one I use).
    Edit in Final Cut Pro (ProRes 422 is fine, ProRes 422 LT would do the trick as well)
    Export as QuickTime movies (original settings)
    In Compressor using the H.264 for Blu-ray setting and Dolby Digital setting and create elementary streams for video (.264 file) and audio (.ac3). Make sure these files have identical names except for the extension.
    Using toast, add the video file to the Toast project and it'll find the audio file.
    Burn away!

  • How to get final cut studio 2 install disk to work on macbook air OS 10.8.4

    I just purchased a Macbook Air OSX Mountain Lion 10.8.4 and trying to install Final Cut Studio 2, however the install disk wont open using a superdrive.  How can I get my software loaded?
    Thank you.

    Try this forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io
    Al

  • How long does final cut studio crossgrade mail take?

    Hey there, forgive me if this is the wrong place to ask this.
    I sent in my final cut studio discs with filled out form in about 4 days ago regular mail.
    I scanned the discs before i sent them off and of course I still have my paperwork (serials) and all that.
    What bothers me is that I check the status and there is no record of it.
    there is also a field that is required for "company" and I dont have a company name so I have no idea if this is screwing up the whole look up.
    Anyway, its probably that they havent recieved my discs yet, since 4 days isnt very long.
    BUT, can anyone clue me in on how long it took to get their universal versions nial cut studio?

    It took mine almost 2 weeks. It took almost a week for mine to show up on the status and when it did, it said backordered. Stayed that way for 4 or 5 days, then got an e-mail saying they had been shipped. Got them this past Saturday.
    Company name doesn't matter. I didn't fill in one on the original form and didn't when used the status form.
    Sharon

  • How to remove final cut studio

    I have installed final cut studio in my computer, but I don't see some programs installed like compressor.
    How can I delete everything from my computer and then install all again (final cut studio).
    Thanks

    i need to remove the whole pack of final cut studio.
    do you know how to do it?
    i know that i need to remove every file manually...

  • How well does Final Cut Studio run with 3gb of ram? Macbook Pro 2.33mhz

    I have a 2.33mhz (Model a1211) Macbook Pro. I've maxed out the ram to 4gb but because of the motherboard restrictions (that I still don't quite understand) it can only use 3GB.
    I've read on the FCS specs that the minimum is requirement is 1GB but Apple recommends 4GB.
    I cut mainly short 3 to 5 minute pieces with AVCHD video decoded with up to 60-90 minutes of footage.
    Will I have any serious issues with any of the Final Cut Studio Programs that I should be aware of?
    I'm obviously not expecting Mac Pro results but If it doesn't run very well with 3GB, I might have to rethink my purchase. If it is just a "hiccup" now and then with waiting for video to start or such, I will deal.
    Thanks
    Bryan
    <Edited by Host>

    Motion is gfx intensive. Meaning that the lower the gfx card, the lower the performance. You should expect little-to-no realtime performance from Motion on the system mentioned with even basic-to-remotely-intermediate animations. CPU RAM will make a difference in the amount of total frames that you can render in a RAM preview, but it will not affect realtime performance. With your proposed system: add a particle, a lower third text, a replicator with 5,000 points, a light with some shadows, and a reflection (and this is one of each mind you, not multiple instances) and expect around a * less than * 1-3 fps playback in draft quality with %50-%25 playback resolution. Then expect to wait up to a minute or more with the beachball of death for each parameter change. No joke either. Good luck fine-tuning your moderate-to-even-remotely-complex animation with your desired system.
    If working in Motion is your desire, then focus on the graphics card. Unfortunately you can not upgrade your gfx card on the MBP, so you should consider selling your MBP and investing in a Mac Pro. You can upgrade the gfx card in the Mac Pro and obtain optimal performance from Motion. Otherwise you'll literally be stuck in the mud with your animations.

  • Advice How to Ugrade Final Cut Studio 5.04 5.1?

    Has anyone written anything on how to update my FCS Final Cut Studio 5.0.4 to 5.1?
    I received my 5.1 replacement disks today (and not looking forware to the chore).
    Do I uninstall (trash what folders?) and run the 5.1 disks?
    Any tips will be greatly appreciated...

    Finally got around to running 5.1 crossgrade (with my 5.0x still in place) -- appears seamless -- I just started the #1 install disk and followed all the instructions -- it didn't even ask for the serial...

  • How to remove Final Cut Studio content, extras, etc?

    Hi,
    I want to say that I do not want to delete the apps. What I want to do is only remove the extra content.
    Essentially, I installed the entire Final Cut Studio on my MacBook Pro and am realizing I should not have done the complete install (eats up hard drive like no tomorrow).
    So.. any / all advice would be greatly appreciated!!
    Thanks!

    In Motion, open the Motion preferences found in the Motion menu... on the front page you see the path names to templates and livefonts... If you remove them, you could place them on another drive like a FW drive... and access them that way.
    In Livetype, The media files are located in Macintosh HD/Library/Application Support/LifeType/Templates. You could move them, then add their new location to the window that opens when you select LiveType's Preferences. Then LT will look for templates in this new location.
    In DVD SP, the location of styles and templates is near the same path as in LiveType, however in the DVD SP folder. To reset them to a new location, the preferences for DVD SP you can change the location of where DVD SP looks for these...
    I'd not want to lose them altogether, but you won't hurt anything doing so... I'd put them on an external drive and reset where the various apps look for them, and if all is well, delete the originals...
    Jerry

  • How to register Final Cut Studio after upgrading system?

    After upgrading my system and changing to a new G5 Final Cut Studio lost Registering Info.
    Always after around 5 times booting Final Cut I have a dialog box, that I have to register.
    But the "Register Now" button is not aktive!
    What to do?
    G5 2x2 GB 1,5 GB RAM Mac OS X (10.4.7)
    G5 2x2 GB 1,5 GB RAM   Mac OS X (10.4.5)  

    Make sure you have filled out all the fields
    If I remember right, there is one field that is left blank (can not remember which one). Fill that one in, and the register button should become active.

  • How to install final cut studio on yosemite?

    Guys,
    Before I start my next video project, I want to do a clean install of Yosemite and also a clean install of Final Cut Studio with FCP 7. I'm running a Mac Pro, 2.26 quad core (2009).
    What's the best way to do this?
    I know some people have had problems installing FCP7 on Yosemite. Just to play it safe, I'm currently partitioning my drive and will install a boot version of Yosemite to try the FCS install on. If all goes well, I'll totally wipe the drive and install Yosemite.
    If things don't work out, I'll wipe the partition and stick to Mavericks.

    Insert the DVD.
    Click on the installer package.
    Follow the on screem instructions.

Maybe you are looking for