How can I find a PO is closed or Canceled.

Hi Friends,
I Have a PO say 3000000001. How can I find this PO is closed or Canceled.
Thro' Transaction and Table.
Regards,
Viji

hi,
use this table .
EKKO.
field :
LOEKZ
STATU
PROCSTAT.
also u can use this table.
CDHDR
field :
CHANGE_IND.

Similar Messages

How can i find area under a closed curve

I am having set of Y-values w.r.t X-values.When i am using numerical integration.vi to measure area, it is showing wrong answer.Is there any other vi to find the area under a closed curve.

Is the dt constant between your values? The numerical integration.vi needs them to be...
What's the correct answer depends on how you are to interpolate between the points. The numerical integration.vi allows you to select between a number of approaches (Simpson's rule, trapezoidal etc..). It does not allow integrating the values as if it were a histogram...If that is what you want to do then all you need to do is to add the values and then multiply the result by dt...
When you say that the answer is incorrect, could you give an example array, dt and correct result?
If the curve is supposed to be a special function you could use regression analysis to find the formula of the curve and then integrate that...
MTO

How can I find out if BT have cancelled my landlin...

How can I find it out if BT have cancelled my landline BB and vision due to faults

they should contact you and advise you of the termination dates for services and any charges for services up to the end of your contract period after that date the services should cease
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

How can I find the location of an app on my iPad 2?

How can I find the location of an app on my iPad 2? The app comes up with a search, but that seems to be the only way to find it. I just installed the app today, but I can't figure out where it is. It has a pretty distinctive icon, and I've looked through all of my apps and even in folders (even though I don't know how it would have gotten there). I want to put it in an appropriate folder under the right subject, but I can't find it to do this. I can use the app, since I can find it through a search though. I have a lot of apps, but I looked very carefully and can't find it. Is there a way to ask my iPad to locate it for me? It's a $25 app and one I plan to use regularly, so I want it located in the folder of my choice.This problem makes we wonder if I have other "missing" apps, apps that I could find if I happened to think to search for them, but that don't appear to be on my iPad (even though they actually are).

You were right about the homescreens. I had turned my iPad off for the night with less than three full homescreens of loose apps, those not in folders. When I turned the iPad on this morning to try your suggestions, I had five full pages of loose apps. They just appeared when I restarted, and there was the app I was looking for, easy to find. Last night I was deleting apps I decided I wouldn't use, organizing useful apps into folders, and making sure I had as few pages as needed by making sure the gaps made by the moved/deleted apps were closed. The missing apps didn't show up at that point; I was just left with fewer than 11 pages. The apps only showed up when I restarted this morning. There were almost three extra pages of apps that weren't there last night. I know there must be other things missing, since all of the pages are full. So I tried your suggestion in iTunes. I connected my iPad, found an app in the alphabetical list on the left, and double clicked it. This brought me to the app's homescreen (and its home folder when applicable), the place where it was located. In order to identify which page that was, I had to scroll through the screen shots of the homescreens that was below the homescreen that was showing until I found the homescreen whose number was in white. Then I could count the pages on my iPad until I got to that page. I'll have to delete more apps and organize more into folders to see what else might show up. There are just too many apps available for special education, and I'm in the process of figuring out which are the best for my needs. Thanks so much!

I had 2 games of clash of clans on 1 game centre. Now I can only see one? How can I find the other one?

My kids had 2 games of clash of clans on 1 game centre. Now I can only see one? How can I find the other one?
My daughter set up a game centre on her ipad. My son, on his ipad used the same game centre log in. He then set up his own game of clash of clans. After my son set up his Clash of Clans, my daugher set up her own Clash of Clans using the same game centre log in on her ipad. Both were using the Clash of Clans successfully on their own ipads using the same game centre log in.
One day my son signed into someone elses Clash of Clans, since then he is unable to go back to his Clash of Clans and can only see his sisters.
Please let me know if this can be resolved.
We wish to delete my daughters Clash of Clans - as she does not use it at all. We would like to regain access to my sons.
My son can visit his Clash of Clans - his clan name is 'The Big Boys' He has a shield that is blue with a yellow lightning from top right to bottom left. His name is Fat Poo (I know ridiculous).
If you can help us or advise us what to do we would make my son very happy
thanks

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

How can I find out what is eating up my data?

This is my second month with Verizon and with my old service plan we only use to use 5GB per month. Now we are over 7GB. How can I find out what I am using that is eating up my data? I still do same things I did 3 months ago.

I Assume you may have more than one, new device. You can check in each devices settings, under cellular/mobile data to see which applications are using the most data.
YOu can then change many of the applications to use wifi only by turning cellular data off.
email and social media apps have settings within the apps to restrict cellular use, like not showing video of images.
restrict application from running in the background by closing apps before leaving home wifi or letting your phone "sleep" at home, while not connected to power. (To save battery your phone switches off wifi, reverting to cellular, not a desirable feature, but it is supposed to save battery)
** to close apps, double click home button and swipe up to close app. Leaving YouTube, Games, Maps, Social media apps open in the background can use mobile data.
clear the "outbox" in email. Cases of massive data use have occurred when an email continues to fail and sits in the out box of the Mail app.
IN General, a newer phone does use more data for the same functions as older phones.
FFor more help with your iPhone, please visit Apple support, community forums or a Genius Bar. I find them very helpful.
if you do go in to Genius Bar, back up your device. In some cases, replacing or a complete restor are the only solutions.
Official Apple Support
GOod luck!

How can I decode the phone company closed on the At

How can I decode the phone company closed on the At

If you're asking how to get a carrier locked phone unlocked, contact the carrier it's locked to and find out what their policy is.
If that's not what you meant, then post in your native language, because you're not making sense.

For a given tcode how can we find out the available standard events

Hi Experts
For a given tcode how can we find out the available standard events?
Thanks in advance

Arghadip Kar wrote:>
>
> Or you can debug the Service for Generic Object button in the standard screens and there you will find which BO the Tcode is referencing to.
>
Wonder where you got that answer from, Arghadip!
You have neither acknowledged nor closed the 16 threads that you opened.

How can i find how many sessions are opened in my database

Hai
Iam using Oracle 10g version, front end that iam using is oracle forms6i, sometimes my system get hanged because of some session and not closed i think, can i know how can i find how many session is opened on my database.

You could query the V$SESSION dynamic view. More info...here...
HTH!

How can I find out what is on my macbook and not on my other macs that results in continual downloads from the satelite dish and resulting overcharges?

How can I find out what is on my macbook that results in continual usage and usage charges from the satelite dish when turned on, even in the middle of the night- which doesn't happen with my other macs?

I have BusyCal installed, but no alarms that I could find.
However, I do think I've found the source of the sound: the Firefox add-on "LiveJournal." It routinely checks my LJ and plays a "ding.wav" file whenever there are new posts to my Friends' page. I noticed that the sound started happening more frequently, but after I closed Firefox, it stopped. But since Firefox didn't have any sound/notification settings on its own, I thought to check the extensions, and voila!
I'm pretty sure the problem is solved, but who knows if the sound will mysteriously return...
I

How can i find the printing program?

hi
i have sap script how can i find the printing program ?
ami

ami bardogo wrote:
hi
what is the different between the commands 'break' and 'break-point'
thanks,
ami
h2 Breakpoints h2
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
·        You do not have to change the program code.
·        You can set them even when the program is locked by another programmer.
·        You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
For further information on special breakpoints, refer to:
Breakpoints at Statements
Breakpoints at Subroutines
Breakpoints at Function Module Calls
Breakpoints at Methods
Breakpoints at System Exceptions
h2 page break h2
WINDOW TYPES
When defining a layout set window, you must select a window type for the window. You can choose between three types:
Constant windows (CONST)
Variable windows (VAR)
Main windows (MAIN)
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
MAIN WINDOW
Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
HOW THE COMPOSER WORKS
The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
Page control in layout sets
Define subsequent page statically
Define subsequent page dynamically
Format a layout set page
PAGE CONTROL IN LAYOUT SETS
SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
DEFINE SUBSEQUENT PAGE STATICALLY
You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
DEFINE SUBSEQUENT PAGE DYNAMICALLY
The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
NEW-PAGE .
NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
FORMAT LAYOUT SET PAGE
The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
LAYOUT SET CONTROL
To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
Several print requests
Start a layout set again
Switch layout sets
Find layout sets
SEVERAL PRINT REQUESTS
Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM.

How can we find out data in an editable ALV grid has been changed or not?

Hi Experts,
How can we find out whether a data in an editable ALV grid has been changed or not.
I am using the
FM -> REUSE_ALV_GRID_DISPLAY_LVC
for ALV display.
I have to chekc whther data has been changed or not befor saving. if changed then only i want to
SAVE
. I cannot use the internal table comparison method for this purpose also i am not using OOP ALV.
So kindly sugest me an alternative.
Thanks and Regards,
Shahana

Hi,
Thanks for your answer. I already saw this post.
See this method.
CALL METHOD reuse_alv_grid->check_changed_data
IMPORTING
e_valid = lv_check.
This will update the internal table with the edited values. Then we can go for internal table comparison.
But my scenario will not allow me for itab comparisons.I just want to know the ALV data has been changed or not.
Regards,
Shahana

How can i find SAP Gui logon pad version

how can i find SAP Gui logon pad version ?

Hi,
That's easy. At the top of the logon, you see a title bar with a general version indication. At the most left of it, you'll see an icon. Click on that and choose about SAP logon and you'll get detailed info.
Eddy
PS. Reward the useful answers and you will get <a href="http:///people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

How can we find the most usage and lowest usage of table in Sql Server by T-SQL

how can we find the most usage and lowest usage of table in Sql Server by T-SQL
The table has time stamp column
StartedOn datetime
EndedOn datetime

The Below query has been used , but the textdata column doesnot include the name of the table ServiceLog.
SELECT
FROM
databasename,
duration
fn_trace_gettable('F:\Program
Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\log_148.trc',
default)
WHERE
DATABASENAME='ZTCFUTURE'
AND TEXTDATA
IS
NOT
NULL
--AND TEXTDATA LIKE 'SERVICE%'
order
by cpu
desc;

I want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized?

i want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized? also how can i update the software?

This is a tedious solution, which is stupid! And some users report an inability to reauthorize a computer after an "en masse” deauthorization. I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge!

How can I find a PO is closed or Canceled.

Similar Messages

Maybe you are looking for