How can I find clearing document item from BSE_CLR?

Hi All,
I can find cleared document item be partial paid in table bse_clr by field BUKRS, BELNR, GJAHR, BUZEI.
but I can't find clearing document item in table bse_clr, is there any other table stored the clearing document item data?
best regards,
Eric

hi
Use table BSAD,BSAS,BSAK  for cutomers, gl accounts and vendors respectively
Regards

Similar Messages

  • How can we find delivery documents which are not goods issued?

    Hi All,
    How can we find delivery documents which are not goods issued?
    Thanks in advance

    hi,
    please check in VL06O.
    there will be plenty of options on the same.
    you are requested togo for push button FOR GOODS ISSUE from there u will go to VL06G only
    your requrient will be satisfied.
    regards,
    balajia
    Edited by: balaji timmampalli achari on Nov 11, 2010 12:39 PM
    Edited by: balaji timmampalli achari on Nov 11, 2010 12:40 PM

  • HT1373 How can I find Pages documents I've created on my iPad on my Mac?

    How can I find Pages documents that I've created on my iPad on my Mac?  I have iCloud set up.  Thanks.

    Welcome to the Apple Support Communities
    If you have turned on iCloud on the iPad and on the Mac, you can see your documents created on the iPad if you are using Pages '09 and OS X Mountain Lion. Open Pages and the iCloud window will appear with the documents.
    If you don't have Mountain Lion and/or Pages '09, you can access to them on http://www.icloud.com, choosing iWork

  • How can I find my IMEI number from icloud

    I have lost my iPhone and as I do not have a PC or Laptop I haven't backed it up to itunes. I have however, got an icloud account that it is backed up to. How can I find the IMEI number from icloud?

    See: http://support.apple.com/kb/HT4061
    and: http://support.apple.com/kb/HT4946

  • How can I find my iphoto pictures from a recovered hard drive.

    My macbook pro suffered an attack of spilled wine. Its unrecoverable as smoke and flashes were seen when it was powered up afterwards. I removed the hard drive to recover all my files but I can't find the file with my iphotos library in it. How can I find it or where should I look

    It actually helps if you provide details first - your original question was how to find your photos - now it turns out that you knew where they were but were trying to open the library with an older version of iPhoto
    older versions of iPhoto can not open newer libraries - iPhoto library manager can rebuild a library for an older version
    Or you can copy the originals (or masters depending on the version of the newer iPhoto which you do not share) folder to the desktop and then create a totally new library using just the photos
    LN

  • How can I find all documents encrypted by a certain application?

    I don't think Spotlight can help with this, so I am trying to use the ordinary Command-F(ind).
    I know there's a parameter option "Created by [application]" but that doesn't work, even though the Info window shows the Kind as this application.
    The specifics:
    Under System 9, I encrypted a lot of files (personal correspondence, mainly) using Sentinel 2.2. In other words, I used Sentinel to require a password to open those files.
    Now I can't open them, because that program doesn't work with Sys X.
    I could open them in Sys 9 and then resave them without the encryption. But I need to find them all.
    (I want to handle them all now, rather than over the next few decades when one might pop up now and then. I won't have Sys 9 forever.)
    I can't find any perameter option to use (in Find) that will locate these files. I have a suspicion that maybe the reason searching on the creator application doesn't work is because Sentinel didn't technically create the documents, it only encrypted existing documents—although in the Info window, Sentinel is shown as the Kind. If it's any help, also shown in the Info window is the version: "Sentinel 2.2, © 1987-89 Supermac Technology."
    Sentinel put it's own icon on all the locked files.
    Seems like it should be easy to do a search to find all these files, but I can't figure out how.
    Any suggestions?
    Thanks.
    Larry

    You should be able to do it, but first you'll need to get a unique piece of metadata for the files, and then you'll need to use the Raw Query format in the Find window. I have a handy little utility written by a cyber-friend I keep in the Dock for getting the metadata entries for a file, and I think there are other free ones on VersionTracker, but you can also use Terminal to get the relevant entries. Thus I have some old Excel files. To locate all of them, I would do this:
    1. Open Terminal (it is in your Utilities folder) and type
    mdls
    and a space. Then drag and drop one of your files into the Terminal window and hit the Return key. The result will look something like this:
    NoobiX:~ francine$ mdls /Volumes/Data/BackUp/8600drives/FastMac/Documents/Finances/Finances1995
    /Volumes/Data/BackUp/8600drives/FastMac/Documents/Finances/Finances1995
    kMDItemAttributeChangeDate = 2007-08-01 12:15:22 -0700
    kMDItemContentCreationDate = 1996-03-13 01:27:46 -0800
    kMDItemContentModificationDate = 1996-03-13 02:08:03 -0800
    kMDItemContentType = "com.microsoft.excel.xls"
    kMDItemContentTypeTree = ("com.microsoft.excel.xls", "public.data", "public.item")
    kMDItemDisplayName = "Finances1995"
    kMDItemFSContentChangeDate = 1996-03-13 02:08:03 -0800
    kMDItemFSCreationDate = 1996-03-13 01:27:46 -0800
    kMDItemFSCreatorCode = 1480803660
    kMDItemFSFinderFlags = 256
    kMDItemFSInvisible = 0
    kMDItemFSIsExtensionHidden = 0
    kMDItemFSLabel = 0
    kMDItemFSName = "Finances1995"
    kMDItemFSNodeCount = 0
    kMDItemFSOwnerGroupID = 501
    kMDItemFSOwnerUserID = 501
    kMDItemFSSize = 6954
    kMDItemFSTypeCode = 1481397044
    kMDItemID = 58528
    kMDItemKind = "Microsoft Excel 4.0 worksheet"
    kMDItemLastUsedDate = 2007-08-01 12:15:22 -0700
    kMDItemUsedDates = (1996-03-13 02:08:03 -0800, 2007-07-31 17:00:00 -0700)
    2. Since I want to find all the old Excel files, I chose the line
    kMDItemKind = "Microsoft Excel 4.0 worksheet"
    You can just drag to select that line with the Mouse, then select copy.
    3. In the Find window criterion drop down menu, select Other, then scroll down to Raw Query, select it, and then paste the kMDItemKind line you copied into the open field. That should do it.
    Francine
    Francine
    Schwieder

  • How can i remove the menu item from a menu

    how can i remove the JMenuItem from a JMenu at run time.
    thanks in advance

    This is in JMenu from the api
    void remove(JMenuItem item)
    Removes the specified menu item from this menu.
    You must download the api! it helps a lot!
    You can do that or if you need to access it again just set it visible(false);

  • How can I add and remove items from the bookmarks toolbar?

    I want to remove items from the bookmarks toolbar and add ones that I use on a regular basis. How can I do this?

    See:
    *https://developer.mozilla.org/en/Chrome
    *http://en.wikipedia.org/wiki/User_interface_chrome#User_interface_and_interaction_design

  • How can I find movies with subtitles from iTunes for iPad?

    The problems are two:
    1) Using an iPad, can I find subtitled only movies? If were possible, how?
    2) Ever with an iPad, it's possible setting on/off subtitles in movie? If were possible, how?
    Thanks,
    Cristiano.

    You turn it on by going to settings-video-closed captioning=on.
    If a video has captioning, should have the closed captioning symbol on the video description screen in iTunes store.
    You can get software to add captions to your own videos.
    Handbrake:
    HandBrake can now include subtitle tracks that can be turned on and off, instead of rendering them onto the video track permanently (which also reduces video compression). This means you can include Closed Captioning data from DVDs and TV broadcasts, or find SRT text subtitle files on the 'net and include them. When using the Matroska container, you can also store the graphical subtitle images (VobSubs) from a DVD as a separate track. An added benefit is that multiple subtitle tracks can be included in the same output video.
    Road movie:
    http://www.bitfield.se/roadmovie/about_subtitles.html

  • How can I find where this came from? - start up disk almost full

    Hi, my mac began saying this to me today "Start up disk almost full"
    So I began deleting files. I deleted a lot via DiskWave.
    But now Diskwave says I have enough space but my mac sure doesn't.
    What do I do? What's all that 'other' stuff and where can I find it?
    Thanks in advance!

    For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
              iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Launch the built-in Terminal application in any of the following ways:
    Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • How can I find the Scripts directory from a script?

    Hello all! After playing with Photoshop scripting, I'm now playing with AE too, and in my first try I've stuck in finding the scripts path from the script itself.
    In Photoshop, there was this piece of code that somebody in the Photoshop Scripting forum kindly shared:
    var scriptsPath = new Folder (app.path + "/" + localize ("$$$/ScriptingSupport/InstalledScripts=Presets/Scripts"));
    But this line doesn't work in After Effects because app.path variable doesn't exist (very funny, I thought Photoshop and After Effects shared the same basic app variables) and the path given to the "localize" function is wrong in AE (I think "$$$" means nothing to it).
    Can somebody give me a clue about how to solve this? Thanks a lot in advance :-)

    This script shows a couple of examples you can try. The first part shows a way to get the folder the running script is in. The second gets the main AE app folder although I don't know if appFolder works on Windows (you'd still need to add /Scripts on Mac or /SupportFiles/Scripts on Win).
    var thisScript = new File($.fileName);
    var containingFolder = new Folder(thisScript.parent.absoluteURI);
    alert("This script is in " + containingFolder.absoluteURI);
    var appFolder = new Folder(Folder.appPackage.parent.absoluteURI);
    alert("The app folder is at " + Folder.decode(appFolder.absoluteURI));

  • How: can i get a specificated item from a list with more than 100.000 items

    Hi,
    i have a very large list and i got always an exception that the list has more than 5000 items and cant query!! But in the default list view i can see, order and filter all items. So how can i do this by c#?

    Hi,
    According to your description, my understanding is that you want to get a specific list item form a list which with more than 100000 items using C#.
    I suggest you can use CAML Query with some condition and set Row Limit to specify the number of items to return.
    Here is a detailed code demo for your reference:
    Client Object Model Access Large Lists/Overcome ListView Threshold while accessing large list
    Thanks
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How can I find the serial number from CS4 for my mac? I remembered it being on the box, but now I can't find it, and they website I thought to have registered it to doesn't recognize the e-mail I would have used then I got it.

    I don't know if this is the right place to ask this, but the website recommend I ask here. I bought the CS4 when I bought my macbook pro in when I was in college. I remember there being 2 serial numbers, so I could install to one other computer. That macbook pro finally died, and now I have a new mac which I am trying to re-install the creative suite on, only I can't find the serial number.  The two stickers on the back of the CS4 box (which i thought were the serial numbers) don't look like that they're asking for, and the website listed on the inside of the box for me to register to doesn't recognize my e-mail (which hasn't changed since buying CS4).  Any idea where I could find the serial number?

    To locate the serial number:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • How can I find and delete videos from iPhoto?

    When I use iMovie to create a video for You Tube the program loads every bit of video I have in iPhoto.  I have attempted to delete all of the old, unused, videos but they do not all appear in the library list.  I have several videos that come up in iMpovie that I can't find in iPhoto.  Thanks for your help.
    Stu

    Use the serach feature at the bottom of iPhoto and enter "movie".  All  movie files imported into iPhoto are automatically given a keyword, movie.
    Or you can create a smart album with the following criteria:  Keyword is movie.  Select all the movie files and use the key combination Option+Command+Delete to move the files to the iPhoto Trash Bion.  Then empty the iPhoto trash bin and the Trash bin in the Dock..
    OT

  • How can I find my restored photos from trash?

    I went into my trash and selected a number of photos then clicked restore photos to library.  Now I can't find the photos anywhere...I've looked throughout my events and all my other folders.  Where are they?????

    I assume that you are talking about the iPhoto trash? If so then they should be returned to the event they were in prior to being moved to the iPhoto trash
    LN

Maybe you are looking for