How can i find my errors during project validation before burning my project

How Can I find the errors during the project validation before burning the project??

Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Similar Messages

  • How can u find SRM error message texts?

    hi friends
    How can u find SRM error message texts?
    thanks
    regards
    chinna

    Hi,
    There are several ways.
    1. Go to BBP_PD and open the document. Select the link "Check again" in the bottom area.
    2. Go to SE17 and serch it from table T100.
    3. Go to SE91.
    Regards,
    Masa

  • TS2755 How can I find a number I perviously texted before?

    I was texting a number and accidently deleted it.  How can I find the number again (if possible)?

    Does you carrier offer any kind of web access to your billing account? If so, when your bill generates, you may be able to see a list of your texts, who you texted. If you know the approximate time and date of the conversation, you might be able to find the number.
    Best of luck.

  • The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    https://discussions.apple.com/thread/6219522

  • Getting the error "Adobe Send cannot currently send this file" how can I find out why?

    Getting the error "Adobe Send cannot currently send this file" how can I find out why?

    Hey James,
    Please let me know what kind of file are you trying to send using 'Adobe Send' online service.
    Does this happen with every file you try to send or any specific one?
    Have you tried using a different browser? What happens? Check with your internet connection speed as well.
    Hope to hear from you.
    Regards,
    Anubha

  • Film won't render. Error is like: error in frame 3490. How do I find out what is wrong? How can i find the frame numbers?

    Hello
    Who can help me? I made a movie in Final Cut. Not a special one, some text and that's all. With scenes from mu Sony camera, I imported. When i want to share the movie (to facebook, youtube, or masterfile), it won't work. It loads upto 57% or so and that it quits, and gives error code:
    the operation could not be completed because an error occurred when creating frame 3490 (error -1).
    And now? I can't find framenumbers? How can i find out what's wrong. I tried everything. The film plays well in playback. I just can't make a filmfile.
    Xandra Storm

    Like Tom said, you can locate the offending frame by switching in Preferences->General the Time Display to "Frames" (that is how it looks in 10.1; I believe that in older versions the same preference might be in Edit or Playback preferences, I can't recall exactly).
    When this error occurs, it can usually be solved by deleting render files, or by replacing the clip where the problematic frame happened.

  • How  can i find the IDoc's with errors

    Hi gurus,
    How to find the errors in Idocs and How to solve it?How can i rectify the errors?
    Thanks in advance.
    kumar.

    Hi Kumar,
    You can goto WE02 T'code and give the IDOC number (check date range).  Click on Status Records.  It shows the exact error. 
    If IDOC fails it is gives your the status 51 otherwise it gives you the status 53.
    Assign points if useful
    ~Rajesh

  • How can I correct the error Write Permission Open so that I can finalize a project in I Movie?

    How can I correct the error Write Permission Open so that I can finalize a project in I Movie?

    Post in the iMovie forum.

  • When attempting to download a podcast I get an error message "stopped err=404.  How can I find out what err=404 is?

    When attempting to download a podcast I get an error message "stopped err=404.  How can I find out what err=404 is?

    404 is a http status code meaning it could not find the link, presumably the subscription link is down or has moved.

  • How can we find the exit being implemented in a project.

    Hello,
    Very Good morning!
    How to find the impelementd exit for a given transaction
    How can we find the exit being implemented in a project and to find it's source code?
    Any Suggestions would be appreciated...
    Regards,
    Kittu

    Hi,
    Ways to find the exit triggering in the source code:
    1)first way
    1) If you hav that FM exit that was listed r used.
    2) go to se37 and type that FM
    3) In the source code of that FM double click the type of Message or
    exit result which has the Z<include>.
    4)IN order to disable the exit->
    utilities->system->sattus->program->attributes->package
    find this package
    5) in SMOD->Prject->F4help->giuve package name-give the found ones
    But here we cant see the implementation.
    2) second way
    1)goto SE37
    2)Give FM name
    3)/h(Debugging on)
    4) Display
    5) Break points->statements->(messages if used in exit)->execute
    Click on f5 until that Exit is triggered
    6) go and find out for each type of exit message shown ie til that exit functionality is
    actually triggered
    7)once u find that exit ur looking for->
    8)GOTO->SOURCECODE->give the include name that is found in debugging when exit is encountered
    9)copy this include name(ZX..)->keep a comment forthat exit in this include(ZX..) inorder not to process.
    10) se38->Zincludename(ZX..) and comment the code.
    11)save check n activate
    ->SE37->
    FM->name
    we can now view FM.
    3) third way
    1)FM->Name
    2)/H
    3)Break point at CALL CUSTOMER-FUNCTION statement
    4) It will stop at this exit.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project:  - There appears to be a broken asset in your project. Correct this problem before burning this project."

    What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project:  - There appears to be a broken asset in your project. Correct this problem before burning this project."

    It means that iDVD has found a problem with one of the movies added to the project.  Did you edit the movie after it had been added to the project.
    Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • How can i find out if i have a bad codec affecting after effects?

    hi all, i'm having all kinds of problems with after effects cs4. the current problem i'm having is i'll be working on a project, it starts to slow down and become unresponsive, i try to save but then it crashes and everything i've done is lost. opengl is off but i don't think that's the problem because opengl isn't affecting any of my other programs like cinema 4d and i even tried taking out the opengl from the plugins folder but i was still getting opengl error messages with certain effects like the rotoscoping effect. i was wondering if maybe this might be a codec problem since i heard that ae loads codecs at start. how can i find out if a corrupted codec is affecting my after effects?
    after effects cs4
    amd turion 64 x2 mobile technology tl-62 2.10 ghz
    3 gb ram
    windows vista 32
    geforce go 6150
    total graphics memory: 1343 mb
    dedicated graphics memory: 128 mb
    system video memory: 0 mb
    shared system memory: 1215 mb
    i'm pretty much desperate to get this working as it's essential to my work flow and i can't afford to get a new computer right now (i should have bought a mac, now i know) so i'll try anything if you have any suggestions. thanks!

    >how can i find out if a corrupted codec is affecting my after effects?
    You remove them all! ;-) I think you are going about this the wrong way.
    a)If you ever installed any third-party CoDecs manually, they will be listed in the "Add or Remove Programs" section or have an uninstaller.
    b)If those CoDecs were auto-installed e.g. via a web-browser, they will leave traces in the extension lists or even appear as separate entries somewhere as well.
    c) If the CoDecs were part of a program, then by all rights, you really should know which programs those are and know how to remove them.
    Failing that, simply uninstall Quicktime completely. Reinstall it from scratch. Likewise, manually download a full install of Windows Media Player and reinstall it using the "Repair" option. Everything else is pure specualtion - AE may scan your CoDecs on startup, but if you never import any footage using them, they will not be initialized and not cause trouble.
    And honestly: That Mac talk is not worth a dime. Final Cut Pro alone comes with 30 or so extra CoDecs, many of which have been known to be just as troublesome to use with Adobe products and you can encounter the same situation easily any time...
    Mylenium

  • How can I find out user id who has deleted payment order

    Issue : After payment run, the required information has been sent as Idoc to the bank. So, we know the payment order number.   We observed that another payment run also has picked up this vendor invoice and made payment.
    Usually Payment Sent will be marked X until the related information comes in the form of bank statement upload and this amount gets cleared.
    We noticed that bank has made two payments for this amount to this vendor on different dates :- a) when the payment order supposed to be paid as per the payment terms and b) when second paymnet run paid the amount [ this time it got paid directly as there is long due amount ].
    From SAP APP angle, both the payment run worked fine and also the calcaltion of payment terms as well.
    So, we come to conculsion that someone has deleted the payment order from the system. Thats the reason this invoice got picked up by 2nd APP and paid the amount.
    Where we could not find the related entry in REGUH/REGUP tables for this payment order and no document changes.
    Question: How can I find out user id who has deleted payment order. Appreciate any clue / answer for this issue please.
    Thank you
    Sri

    Hello,
    Not sure about deletion logs. =/
    Idea:
    What if an error occured during the first payment? Have you checked sm13 to check if any update termination occured in the payment program?
    Regards,
    Renan

  • How can i find the printing program?

    hi
    i have sap script how can i find the printing program ?
    ami

    ami bardogo wrote:
    hi
    what is the different between the commands 'break' and 'break-point'
    thanks,
    ami
      h2 Breakpoints  h2
    Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
    There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
    Breakpoint Variants
    The Debugger contains different breakpoint variants:
    Static
    A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
    Directly set
    dynamic breakpoints
    Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
    Breakpoints
    at statements
    The Debugger stops the program immediately before the specified statement is executed.
    Breakpoints
    at subroutines
    The Debugger stops the program immediately before the specified subroutine is called.
    Breakpoints at function modules
    The Debugger stops the program immediately before the specified function module is called.
    Breakpoints at methods
    The Debugger stops the program immediately before the specified method is called.
    Breakpoints at exceptions and system exceptions
    The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
    Static Breakpoints
    Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
    In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
    Dynamic Breakpoints
    Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
    Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
    ·        You do not have to change the program code.
    ·        You can set them even when the program is locked by another programmer.
    ·        You can define a counter that only activates the breakpoint after it has been reached.
    Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
    In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
    Lifetime and Transfer of Breakpoints
    A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
    If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
    If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging  under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
    For further information on special breakpoints, refer to:
    Breakpoints at Statements
    Breakpoints at Subroutines
    Breakpoints at Function Module Calls
    Breakpoints at Methods
    Breakpoints at System Exceptions
    h2 page  break h2
    WINDOW TYPES
    When defining a layout set window, you must select a window type for the window. You can choose between three types:
    • Constant windows (CONST)
    • Variable windows (VAR)
    • Main windows (MAIN)
    CONSTANT WINDOW
    A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
    Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
    VARIABLE WINDOW
    The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
    As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
    MAIN WINDOW
    Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
    • It controls the page break.
    • It contains the text body that may cover several pages.
    • It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
    As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
    If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
    HOW THE COMPOSER WORKS
    The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
    Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
    Page control in layout sets
    Define subsequent page statically
    Define subsequent page dynamically
    Format a layout set page
    PAGE CONTROL IN LAYOUT SETS
    SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
    If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
    DEFINE SUBSEQUENT PAGE STATICALLY
    You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
    DEFINE SUBSEQUENT PAGE DYNAMICALLY
    The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
    If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
    NEW-PAGE .
    NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
    FORMAT LAYOUT SET PAGE
    The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
    For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
    As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
    A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
    To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
    LAYOUT SET CONTROL
    To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
    To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
    You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
    Several print requests
    Start a layout set again
    Switch layout sets
    Find layout sets
    SEVERAL PRINT REQUESTS
    Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
    CALL FUNCTION 'OPEN_FORM'
    CALL FUNCTION 'CLOSE_FORM'
    CALL FUNCTION 'OPEN_FORM'
    CALL FUNCTION 'CLOSE_FORM'
    You cannot combine ABAP/4 list output and SAPscript output in one print request.
    START A LAYOUT SET AGAIN
    Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
    To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
    CALL FUNCTION 'OPEN_FORM'
    CALL FUNCTION 'START_FORM'
    CALL FUNCTION 'END_FORM'
    CALL FUNCTION 'START_FORM'
    CALL FUNCTION 'END_FORM'
    CALL FUNCTION CLOSE_FORM
    If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM.

  • Windows Internal Database on Windows Server 2012 - How can I find out what role or feature is using it?

    We have setup many roles and features and apparently one of them is using the Windows Internal Database (WID). We have had some events logged for WID and need to troubleshoot them. But we are not sure which role/feature is using it. How can I find
    this out?

    Hi,
    Several components of Windows Server 2008 and 2012 use Windows Internal Database for their data storage: Active Directory Rights Management Services, Windows System Resource Manager, UDDI Services, Active Directory Federation Services 2.0, IPAM and Windows
    SharePoint Services.
    Which role did you setup or what is the error message did you received？
    Regards.
    Vivian Wang

Maybe you are looking for