How can I find out my scurity questions

How do I find out my scurity questions

Read this about how to change the security questions: http://support.apple.com/kb/HT5312
If you can't use these procedures contact Apple. See http://support.apple.com/kb/HT5699

Similar Messages

  • After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?   So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

    After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
    So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
    Is it possible to see what iDVD did?

    I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
    The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
    The value of Compressor is that it gives you control over the many parameters that affect size quality.  and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
    Good luck.
    Russ

  • I forgot my security questions for itunes, how can i find out my answers?

    i forgot my security questions for itunes, how can i find out my answers?

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • I'm trying to buy an app but since its my first time to purchase, they're asking me to answer security questions but I forgot my answers. How can I find out my answers so I can purchase an app. please answer Thanks

    I'm trying to buy an app but since its my first time to puchase, theyre asking me to answer security questions but I forgot my answers. how can i find out my answers so I can purchase. please help. thanks

    http://www.apple.com/support/appleid/
    Start here. I ended up scheduling for them to call me to get my ID sorted out.

  • How do I find out my scurity answers

    how do I find out my scurity answers

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • How can I find out which .pst or .ost file itunes referres to when synchronising with outlook

    I´ve switched to iphone 4S from my 3Gs and would like to "clean" my itunes Sync before I use the new phone. Problem is, that the synchronisation with Outlook 2003 doesn´t work anymore. I guess the reason is that itunes refers to an old .ost or .pst file on my computer. I ve got several outlook profiles and changed from exchange to pop3. My question: How can I find out which .pst or .ost file itunes referres to?
    Thanks a lot in advance :-)

    Select the tune and then - Get Info - in the dialog box is a note of the Apple ID used to purchase.
    MJ

  • How can I find out what calendars are in my .mac account?

    A simple question, but I am struggling with the answer.
    I have used ical since it first came out and have found it brilliant and very easy to use and access both from the office and also from home. However because I have used it for so long I have had various changes in staff. I am keen to find out if there are any 'other' calendars created by anyone who has/had access to ical via my .mac account.
    The calendars must be stored somewhere online? How can I find out what calendars I am hosting?

    Hello, chunnyb. 
    Thank you for visiting Apple Support Communities. 
    Here are the steps on how to view your purchase history in iTunes. 
    iTunes Store: See your purchase history and web order numbers
    http://support.apple.com/kb/ht2727
    If you need to report and issue with a purchase, see the article below. 
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    Cheers,
    Jason H. 

  • How can I find out if my iphone has been synced to another computer? (Backup/Sync Privacy)

    So it would seem easy for someone (lets just say a girlfriend for example) to plug my iPhone into her computer while I am staying the night and backup to iTunes.  I have my settings to "require a passcode immediately", however there was one day there was access to my passcode at her place while I was not there. So my question is three-fold:
    - How can I find out if my iphone has synced with another computer/iTunes (possible history in the iPhone)?
    - Are there additional privacy settings to make sure no one can backup my iPhone by plugging it into their iTunes?
    - If it has been backed up to another computer is there anything that can be done.
    One reason I ask this is because earlier this year her phone was backed up to my iTunes on accident.  I did not know it was there until months later, but was able to access it with software.
    Thanks!
    iPhone 5s
    iOS 8.1.2
    iTunes 12.0.1.26

    jeffr747 wrote:
    So it would seem easy for someone (lets just say a girlfriend for example) to plug my iPhone into her computer while I am staying the night and backup to iTunes.  I have my settings to "require a passcode immediately", however there was one day there was access to my passcode at her place while I was not there. So my question is three-fold:
    - How can I find out if my iphone has synced with another computer/iTunes (possible history in the iPhone)?
    - Are there additional privacy settings to make sure no one can backup my iPhone by plugging it into their iTunes?
    - If it has been backed up to another computer is there anything that can be done.
    One reason I ask this is because earlier this year her phone was backed up to my iTunes on accident.  I did not know it was there until months later, but was able to access it with software.
    Thanks!
    iPhone 5s
    iOS 8.1.2
    iTunes 12.0.1.26
    - How can I find out if my iphone has synced with another computer/iTunes (possible history in the iPhone)?
    You don't.  Nothing gets stored on the iPhone about what computers the device has been backed up to.
    - Are there additional privacy settings to make sure no one can backup my iPhone by plugging it into their iTunes?
    Yes, it's called a passcode lock.
    - If it has been backed up to another computer is there anything that can be done.
    No.  You might consider changing your Apple ID password to be on the safe side, though, as well as your security questions.

  • HT5622 I think my granddaughter bought a $3.99 app after I put the password in for a free app.  How can I find out what she purchased?  Can I get credit for it?  I just got an email from my credit card confirming the purchase.

    I think my granddaughter bought a $3.99 app after I put the password in for a free app.  I just got an email from my credit card confirming the purchase.  How can I find out what she purchased?  Can I get credit for it? 

    The password is good for 15 minutes to make purchases. You should receive a receipt in 24 to 48 hours for the purchases. There is a link to Report an issue. You could use that to start a conversation with iTunes Support about a refund.
    Apple considers all sales final. But has been known to offer a one time refund. So the question is, do you want to use your one time refund on this purchase or one more expensive in the future?

  • How can I find out user id who has deleted payment order

    Issue : After payment run, the required information has been sent as Idoc to the bank. So, we know the payment order number.   We observed that another payment run also has picked up this vendor invoice and made payment.
    Usually Payment Sent will be marked X until the related information comes in the form of bank statement upload and this amount gets cleared.
    We noticed that bank has made two payments for this amount to this vendor on different dates :- a) when the payment order supposed to be paid as per the payment terms and b) when second paymnet run paid the amount [ this time it got paid directly as there is long due amount ].
    From SAP APP angle, both the payment run worked fine and also the calcaltion of payment terms as well.
    So, we come to conculsion that someone has deleted the payment order from the system. Thats the reason this invoice got picked up by 2nd APP and paid the amount.
    Where we could not find the related entry in REGUH/REGUP tables for this payment order and no document changes.
    Question: How can I find out user id who has deleted payment order. Appreciate any clue / answer for this issue please.
    Thank you
    Sri

    Hello,
    Not sure about deletion logs. =/
    Idea:
    What if an error occured during the first payment? Have you checked sm13 to check if any update termination occured in the payment program?
    Regards,
    Renan

  • HT201303 How can I find out what my security answers are? I am trying to purchase an app on a new device and it won't let me without answering and I have totally forgotten

    How can I find out what my security answers are? I am trying to purchase an app on a new device and it won't let me without answering and I have totally forgotten

    Welcome to the Apple Community.
    You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
    I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.

  • How can i find out the resolution and accuracy of PXI-6602 module?

    I have a 32 bit  8 channel PXI-6602 counter module.  PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.

    Hi chandhu,
    Were you referring to the accuracy of the count register or the timing clock? 
    PXI-6602 specifications can be found in the NI 660x Specifications.  The resolution of the count register is, as you’ve noted, 32 bits.  This corresponds to a maximum count value of 4,294,967,295.  As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
    On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal.  Again, this is all found in the specifications.
    You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
    I hope this helps.  Please post back if you have further questions.
    Ed W.
    Applications Engineer
    National Instruments

  • How can i find out which network my iphone is locked to

    Sorry if iv posted this in the wrong section.well the question is quite simple. how can i find out which network my iphone 4s is locked to, without purchasing sim cards from every network.
    I just bought the phone second hand with no sim as a birthday present for my wife with the intention of getting it unlocked (not jailbroken)
    If any body can give me any advice it would be greatly appreciated.

    call Apple

  • How can I find out if someone has stolen my Apple ID?

    Hi there,
    I have updated my Iphone with the latest version of the Itunes. I tried to log on using my Apple Account and it didn't recognised my password. Then I used my computer to rset the password. I answered all the security questions and I received a notification on my e-mail confirming that my password has changed.
    I tried to log on then and it said that my user name doesn't exist or doesn't recognise it. I tried to answer the security questions again and my birthday doesn't match? How can I find out if someone has stolen my ID. I need to download my App's previously purchased and my credit card details is in there.
    I am using an alternative Apple Account to post this message.
    Please, help.
    Many thanks,
    Francisco.

    expresslane.apple.com.... or you can call 1800MYAPPLE..... Your id may just be disabled

  • My father-in-law passed recently, leaving behind an unopened copy of CS 5.5 Master Collection Student and Teacher Edition for Macs.  How can I find out if he registered this software without opening it?

    Hello forum,
    Hopefully a simple question.  My father-in-law passed recently, leaving behind an unopened copy of CS 5.5 Master Collection Student and Teacher Edition for Macs.  How can I find out if he registered this software without opening it?  After finding out how much this software runs, I'd like to sell or return it if possible to give the money to my mother-in-law for funeral costs.
    Thank you,
    Bichonfreeze 

    Mylenium,
    Thanks for the quick response!
    Thats a shame that it can't be used. Are you sure I couldn't donate the software to a university or school?  It just seems like a big waste for something so expensive.
    Bichonfreeze

Maybe you are looking for

  • XSU doesn't support bind variables - how dumb is that?

    I am using XSU to generate XML from a SQL statement using class OracleXMLQuery. Either I am blind or stupid or there is no support for bind variables in this class! I have used DBMS_xmlquery in PL/SQL before and this does support bind variables, I na

  • Blurry images in slideshow

    Hi, I have a slideshow with a background and transparent PNG files sliding. However, the PNG's look blurry in the slideshow, but when I right-clicked on the slide and opened the images in a new window to check if it was the compression, the image loo

  • Nokia N97 Mini - Pictures / Video - Disable

    Hey, I recently got my Nokia N97 Mini, And im just wondering if its possible to disable the Camera Shutter noise whenever your taking a picture, And is it possible to turn off the Red Light when recording?  Its annoying when im trying to record somet

  • Dmg file not working

    i tried downloading a dmg file on my imac and it says the following disk images couldnt be opened not recognized i need help now

  • Having templates appear when users click the "New Document" button in a document library with custom content types

    Hi all, I'm using SharePoint Online, but I'm seeing the same behavior in an on-prem 2013 instance as well. My situation is this: - I've created a document library - I've created a custom content type and attached a custom document template to it - I'