How can I find out the database version from an old backupset
Hi,
I have to restore a database using an old backupset (4 years ago) to a new database. My challenge is we don't know what version of the database were used back then. Is there anyway I can find this information. We are using the RMAN catalog.
Or is RMAN restore and recovery can be used to a newer version than the backupset?
Thanks in advance.
Regards,
Sosan Fong
Thanks for the reply and suggestion.
We are using its own software for all databases hosted in the server. So I need to cleanup and reinstall after tested in 11g. A little bit more work, but if it works, that's ok. Is there any other suggestions?
Regards,
S
Similar Messages
-
How can I find out the java version Oracle has ?
How can I find out the java version Oracle has built in?
I've tried with ..
SELECT comp_id, comp_name, version
FROM dba_registry ;
But I get.."table doesn't not exist".
Thenks in advance!Pl post details of OS and database versions. Pl see this MOS Doc
What Version of Java is Compatible With The Database JVM? [ID 438294.1]
and these Oracle docs
11gR2 - http://docs.oracle.com/cd/E11882_01/appdev.112/e25518/adfns_environments.htm#ADFNS654
11gR1 - http://docs.oracle.com/cd/B28359_01/java.111/b31225/whatsnew.htm
HTH
Srini -
How can I find out the mail server from email address?
Hi:
How can I find out the mail server from email address?
for example: If I know the email address is [email protected],
how to find the pop3 and smtp mail server?
THANK YOUYou can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
Sean -
How can i find out the table hierarchy
Hi experts,
I have one doubt. how can i find out the table hierarchy in the particular schema.
Let me explain my requirement in detail.. In my Database i have nearly 250 table each table have it's own temporary table(for authorization purpose we are maintaining the temporary tables) for each day i have to clear the temporary table data.
All temporary table connected with each other. i mean all the table having foreign key relationship.. while i attempt the delete the data from the temporary table it showed ORA-02292: integrity constraint violated - child record found.
So can any one please tell how can i delete the child table record first and then parent record table record.
Thanks in advance
ArunCREATE OR REPLACE FUNCTION get_child_tables (
ptable VARCHAR2,
powner VARCHAR2 DEFAULT 'SCOTT',
plevel NUMBER DEFAULT 10
RETURN stringarray
-- -- create this ON SQL*PLUS "CREATE OR REPLACE TYPE STRINGARRAY AS TABLE OF VARCHAR2(50);"
-- AUTHID CURRENT_USER
PIPELINED
AUTHOR DATE VERSION COMMENTS
======================================================================================
[email protected] 26-OCT-2009 1.0 Developed to ease developers effort to find Nth level of Referential integrity
======================================================================================
-- PURPOSE -> To find PARENT=> CHILD relational TABLE(S) in Oracle upto a depth max N Level.
--SYNTAX TO USE
SELECT * FROM TABLE( get_child_tables('DEPT','SCOTT',3)); Store this query in a file for your use
SELECT * FROM TABLE( get_child_tables('EMPLOYEE')); Store this query in a file for your use
-- RESULTS looks as below
--1 => DEPT
--2 => EMP
--2 => EMP2
--3 => EMP_CHILD
--3 => EMP2_CHILD
-- and so on
--This can be leveraged to use in any oracle database REGION 10g having and above.
--This FUNCTION gives formatted result of the Oracle 10g Hierarchical query result coded in the cursor
--to find MASTER => CHILD relational TABLE(S) upto a depth max 10 Level.
--The result of the PIPELINED function can be retrieved using Oracle new operator
--TABLE(array name) in SQL query.
--Due to the AUTHID CURRENT_USER compiler directive any user can use based on his/her access privileges on the database.
--GRANT EXECUTE ON SCOTT.get_child_tables TO PUBLIC;
--CREATE OR REPLACE PUBLIC SYNONYM get_child_tables FOR SCOTT.get_child_tables;
IS
atname stringarray := stringarray ();
-- create this ON SQL*PLUS CREATE OR REPLACE TYPE STRINGARRAY AS TABLE OF VARCHAR2(50);
vlevel NUMBER;
vtname VARCHAR2 (50);
nindex NUMBER := 0;
bprocessed BOOLEAN := FALSE;
CURSOR c1 (powner_in IN VARCHAR2, ptable_in VARCHAR2, plevel_in NUMBER)
IS
SELECT LEVEL, LPAD (' ', (LEVEL - 1) * 2, ' ') || pt AS "TNAME"
FROM (SELECT a.owner w1, a.table_name pt, a.constraint_name c1,
a.r_constraint_name r1, b.owner w2, b.table_name ct,
b.constraint_name c2, b.r_constraint_name r2
FROM all_constraints a, all_constraints b
WHERE a.constraint_name = b.r_constraint_name(+)
AND a.owner = b.owner(+)
AND a.owner =
UPPER (powner)
-- Change Owner here while testing
--AND A.r_constraint_name IS NULL
AND a.constraint_type IN ('P', 'R')) v1
START WITH pt =
UPPER
(ptable)
-- Change your master table here while testing the QUERY
CONNECT BY PRIOR ct = pt AND LEVEL <= plevel;
-- Change lavel here while testing
BEGIN
atname.EXTEND;
atname (1) := 'NOTHING';
OPEN c1 (powner, ptable, plevel);
LOOP
bprocessed := FALSE;
FETCH c1
INTO vlevel, vtname;
IF nindex > 1 AND atname (atname.LAST - 1) = vtname
THEN
--DBMS_OUTPUT.PUT_LINE('2 ==== vtname ' ||vtname || ' '|| atname.count|| ' '||atname.last || ' '||atname( atname.last-1));
bprocessed := TRUE;
END IF;
IF NOT bprocessed
THEN
nindex := nindex + 1;
atname.EXTEND;
atname (nindex) := vtname;
PIPE ROW (vlevel || ' => ' || vtname);
DBMS_OUTPUT.put_line ( ' **** nindex - atname( nindex) '
|| nindex
|| ' - '
|| atname (nindex)
DLOG('ADDING ',vTname); A LOGGING ATONOMUS PROCEDURE FOR DEBUG PURPOSE
END IF;
EXIT WHEN c1%NOTFOUND;
END LOOP;
CLOSE c1;
FOR i IN 1 .. atname.COUNT
LOOP
DBMS_OUTPUT.PUT_LINE('atname (i) ' ||atname (i));
END LOOP;
RETURN;
EXCEPTION
WHEN no_data_needed
THEN -- THIS EXCEPTION HAS TO BE THERE TO GET THE FUCTION WORKABLE
DBMS_OUTPUT.put_line (SQLERRM);
RETURN;
--SELECT * FROM TABLE( get_child_tables('TB_XOP_LETR_TEMPLATE','OPS$CMS',5));
END get_child_tables;
Edited by: user3066657 on Jul 21, 2011 8:42 AM
Edited by: user3066657 on Jul 21, 2011 11:26 AM -
How can we find out the datasourse is having Beforeimage&afterimage in R/3
Hi Guru's,
This is Surendra,i have a doubt like' how can we find out the particular datasourse is having before image and after image in R/3 side before we are going to extract the data from R/3 to BW'.Can any body help me in this scenario.
thanks in advance,
Thanks®ards
Surendra.Hi,
Let me explain it with a DS:
So lets take DS 2LIS_13_VDITM
So logon to R/3 -> Se11->Database table = ROOSOURCE>click on Disply->click on contents (CTRLSHIFTF10) -->mantion Datasource = 2LIS_13_VDITM.
and OLPTSrc Version = D.
And see the value for the field <i>Delta Process for a DataSource</i> (DELTA) .Here we get ABR as the value for the field.
And also you can find all available values for DELTA field.
With rgds,
Anil Kumar Sharma .P -
How can I find out the dpi of an image in Acrobat.
How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.
Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
That opens a panel on the right.
To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties. -
How do I find out the firmware version of my WD Black2?
Dumb question, maybe. How can I find out what firmware version I'm currently on? Need to know this to figure out if I need to update. Thanks
Oops, my mistake, that's the device driver in the OS. I should never post before my second cup of tea. Download and install WDC Lifeguard. Start it, right-mouse click on the drive in question, select Properties, and the firmware version will magically appear. http://support.wdc.com/product/download.asp?level1=6&lang=en
-
How can we find out the disk which is used for a mount point
How can we find out the disk which is used for a mount point?
one of our mount point(/u03/oracle/prod) was using high I/O and this was causing slowness in the server.
I can see a disk operation error in errpt at the same time as below. Wanted to check whether the mount point /u03/oracle/prod is using the disk hdisk31
$errpt|more
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
DXB78877 1125032114 T H hdisk31 DISK OPERATION ERROR
OS version:AIX 6.1
DB:11.2.0.2this is the output for cat /etc/filesystem
/u02:
dev = /dev/fslv00
vfs = jfs2
log = /dev/loglv00
mount = true
options = rw
account = false
/u01:
dev = /dev/fslv01
vfs = jfs2
log = /dev/loglv00
mount = true
options = rw
account = false -
How does one find out the database name , service name in a database
hi,
how do u find out the database name , service name , SID in a database.
Please reply.
Thanks ,
Regards,
RCThis particular information is available in the view V_$PARAMETER owned by SYS. But you can also login with Server Manager as user INTERNAL and run:
SHOW PARAMETERS
The entries pertaining to the naming of the database are:
1. db_name
2. db_domain
3. db_name
4. instance_name
5. service_names
GLOBAL_NAME is a static (not changing) Data Dictionary view which has just 1 attribute (column) called GLOBAL_NAME.
When you run:
select GLOBAL_NAME from GLOBAL_NAME;
You are returned the full global name of the database, i.e. the db_name and the db_domain joined together by dot (.) For e.g. if your db_name = mgmt and db_domain = tech.co.in, then your global_name will be MGMT.TECH.CO.IN.
Ciao.
null -
ADS problem: How can I find out the SP of ADS?!
Hi,
when i try to run the Dynamic Form tutorial i get the following exception:
java.net.SocketTimeoutException: Read timed out
The execution of "Test" under http://<host>:<port>/AdobeDocumentServices/Config
was successfull.
I have SAP Developer Studio SP 11, J2EE SP11, but I am not sure what ADS SP I have.
So my question:
Is it important that the ADS has the same SP than the J2EE and the Developer Studio?
And how can I find out what ADS version I have currently installed?
Kind regards,
TobiHi Tobias,
This can be due to lot of reasons.
Please have a look at the following SAP Notes:
826419 Setting socket timeout for WS Clients in SP10 and SP11
849851 Importing a Web Dynpro patch for Support Package 12
867502 Read Timeout using AdobeDocumentService in Web Dynpro
Also there are few more notes, that you should check.
To check the version of all the components in your J2EE Engine, goto
http://<server>:<port>/sap/monitoring/ComponentInfo
You can see the version of Software Components.
For ADS check ADS_SAP and ADS_SAPOFF components version. It will be like 1.00 SPXX.
Let me know if you still got this problem.
Regards,
Shubham -
Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS -
How can I find out the screen size of the users moniter using the Acrobat SDK?
How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
Thanks,
GregoryCurrently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
Gregory -
How can i find out the more than one times occurance of integer in a array?
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....
Kumar_Mohan wrote:
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so. -
How can I find out the apn number of the battery without having it?
I dont have the battery of my iphone 5 anymore but how can i find out the apn number of the battery? I would like to change it but i need to know the apn number to choose the right battery.
Apple does not provide any user-serviceable parts (other than accessories or sometimes a SIM card tray).
Therefore, there are no legitimate iPhone batteries available for sale anywhere.
Anything you find will either be salvaged, counterfeit, or stolen. -
How can I find out the number of lines in a text file?
How can I find out the number of lines in a text file?
java.io.BufferedReader in = new java.io.BufferedReader( new java.io.FileReader( "YourFile.txt" ) );
int lineCount = 0;
while( in.readLine() != null )
lineCount ++;
System.out.println( "Line Count = " + lineCount );
Maybe you are looking for
-
Unable to complete download for iTunes 10.6.1
I updated to 10.6.1 and suddenly it took 15 hours to download a TV show to my desktop! Now not even apps download (error 3253) so I uninstalled iTunes and tried to install a fresh download and got a further surprise " this download cannot be read(no
-
Not sure exactly how, but I managed to contracted several variants of the nasty Rovnix virus and now my system will not even boot into Safe Mode after trying to restore to several different restore points. Enabled bootlogging, but not sure how to re
-
Adding/Reading XMP Metadata in a psd file
Hi, I'm having some troubles to understand how to add and read XMP metadata on a psd file. I followed the Panel developer guide tutorial, and try to look on the internet for some answers, but I'm still stuck ... Here is the simple example I'm trying
-
T400- make the external monitor primary problem.
I use T400 and Acer p223w monitor. From some reason I cannot make the external monitor to be the primary monitor. Using the Presentation Doctor I have the option to define the external monitor as the primary but when I test it, it says that I have il
-
BUG: OJC produce internal error with JAXB 2.0 src
Hello, the OJC of JDev 10.1.3.0.4.36.99(Service Update 1) has problems with the src of the RI of JAXB 2.0. The JAXB 2.0 uses generics, polymorhy and a lot of annotations. To test my problem take the src from: https://jaxb.dev.java.net/jaxb20-ea3/JAXB