How can I find out the overall time and not only the time of a single clip?

I have set up two cameras in one room. Both cameras record the same thing from different perspectives at the same time. I have found an interesting scene for video 1 (recorded by camera 1). Now I would like to find the time at which the interesting scene takes place in video 2.
However, I have not seen any way to get displayed, at what time the scene starts in relation to the total length of the video (e.g: scene starts after 5 minutes from total 10 minutes).
The indicated time refers only to a part of the clip and not to the overall project, even if a special clip is not selected. Does anyone know, how I can find out the time?

Go to Settings>iCloud>Storage & Backup. It will be shown just below the Back Up Now button at the bottom.

Similar Messages

How can i find out the more than one times occurance of integer in a array?

How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

Kumar_Mohan wrote:
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

How can i find out the last time a back up to icloud was done

How can i find out the last time a back up was done to icloud?

Go to Settings>iCloud>Storage & Backup. It will be shown just below the Back Up Now button at the bottom.

How can I find out the dpi of an image in Acrobat.

How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
That opens a panel on the right.
To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

How can I find out the audio sampling rate of BetacamSP tape?

Hi guys
I'm trying to digitize BetacamSP tape. But I'm afraid if I might choose wrong setting...
This tape is from very long time ago so we don't know which audio sampling rate we recorded with..
How can I find out the audio sampling rate of this BetacamSP tape?
Thanks:)

The sampling rate is set by the Sony DVMCDA2 you are using, when the conversion is made from the analog input to the digital (DV) output. You should be outputting standard DV which is 16bit 48khz audio.
Assuming you are in the US, your Easy Setup for FCP should be DV-NTSC, and then open the Log and Capture Pane and set the Capture Settings Device Control to Non-Controlable Device and you should be good to go.
You will have to roll the deck manually and start and end your capture manually.
You can download a user manual for the DVMCDA2 by clicking here.
MtD

How can i find out the resolution and accuracy of PXI-6602 module?

I have a 32 bit 8 channel PXI-6602 counter module. PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.

Hi chandhu,
Were you referring to the accuracy of the count register or the timing clock?
PXI-6602 specifications can be found in the NI 660x Specifications. The resolution of the count register is, as you’ve noted, 32 bits. This corresponds to a maximum count value of 4,294,967,295. As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal. Again, this is all found in the specifications.
You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
I hope this helps. Please post back if you have further questions.
Ed W.
Applications Engineer
National Instruments

How can I find out the age of my imac

How can I find out the age of my computer to see if it will be able to download latest operating system

Open System Profiler in Utilities folder. Look for the Model ID on the right. Then see the following:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

How can we find out the disk which is used for a mount point

How can we find out the disk which is used for a mount point?
one of our mount point(/u03/oracle/prod) was using high I/O and this was causing slowness in the server.
I can see a disk operation error in errpt at the same time as below. Wanted to check whether the mount point /u03/oracle/prod is using the disk hdisk31
$errpt|more
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
DXB78877 1125032114 T H hdisk31 DISK OPERATION ERROR
OS version:AIX 6.1
DB:11.2.0.2

this is the output for cat /etc/filesystem
/u02:
        dev             = /dev/fslv00
        vfs             = jfs2
        log             = /dev/loglv00
        mount           = true
        options         = rw
        account         = false
/u01:
        dev             = /dev/fslv01
        vfs             = jfs2
        log             = /dev/loglv00
        mount           = true
        options         = rw
        account         = false

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How can I find out the mail server from email address?

Hi:
How can I find out the mail server from email address?
for example: If I know the email address is [email protected],
how to find the pop3 and smtp mail server?
THANK YOU

You can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
Sean

How can I find out the screen size of the users moniter using the Acrobat SDK?

How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
Thanks,
Gregory

Currently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
Gregory

How can I find out the apn number of the battery without having it?

I dont have the battery of my iphone 5 anymore but how can i find out the apn number of the battery? I would like to change it but i need to know the apn number to choose the right battery.

Apple does not provide any user-serviceable parts (other than accessories or sometimes a SIM card tray).
Therefore, there are no legitimate iPhone batteries available for sale anywhere.
Anything you find will either be salvaged, counterfeit, or stolen.

How can I find out the number of lines in a text file?

How can I find out the number of lines in a text file?

java.io.BufferedReader in = new java.io.BufferedReader( new java.io.FileReader( "YourFile.txt" ) );
int lineCount = 0;
while( in.readLine() != null )
lineCount ++;
System.out.println( "Line Count = " + lineCount );

How can i find out the file size of a Keynote on an iPad please?

How can i find out the file size of a Keynote on an iPad please?

I think a rule of thumb is what you're looking for.
Full bandwidth CD audio (AIFF): about 10 MB/min
Apple Lossless: about 5 MB/min
MP3 @ 256k: about 2 MB/min
MP3 @ 128k: about 1 MB/min
Of course the MP3 file size is exactly linear with bit rate.
As for sound quality:
Apple Lossless is, as the name says, lossless.
MP3 @128k: fine for listening in the car or the kitchen etc. If you have an audiophile sound system, this will remind you why you spent all that money.
MP3 @256K: barely distinguishable from CD on very good equipment.
MP3 @320K: probably not distinguishable from CD.
I presume that since you're talking about importing classical CDs these are ones you own. Remember you can always do it again if you need higher fidelity or if better technology comes out. I import most CDs at 128k, since most of my MP3 listening is in the car, or walking, or as background. And I can always play the CD if I want to sit and listen.
The logic for purchased music is totally different -- you probably won't get to upgrade that without buying it some different way. So buying 128k MP3s (or AACs) is something you'll probably regret later. Buying 256k MP3s is a lot less problematic.

How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

Thanks so much for your reply King_Penguin. No, sadly there is not indication of the expected release date on the film, it's no where to be found. I have also tried to look in other places online, but no luck. I guess your latter statement jives more with my situation, that being the studio/rights-holder hasn't feel inclined to provide the date.

How can I find out the list of users who has the access to IT 0008

All,
How can I find out the list of users who has the W R permission for IT 008
for others?
SUIM doe not look like giving me the correct results.
Please advise.
Thanks,
From
PT.

combine tables AGR_1251 and table AGR_Users on keyfield AGR_USERS
in tabel AGR_1251 select on Field LOW values IT0008.OR W OR R,
noiw you get also other values
So better solution run the query twice over AGR1251 first on IT0008 and secondly on values W OR R and then the result over table AGR_USERS
Youu also might put an additional selection on object P* (only selecting HR objects)
output wll be UID in table AGR_USERS

How can I find out the overall time and not only the time of a single clip?

Similar Messages

Maybe you are looking for