How can i find out the resolution and accuracy of PXI-6602 module?

I have a 32 bit 8 channel PXI-6602 counter module. PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.

Hi chandhu,
Were you referring to the accuracy of the count register or the timing clock?
PXI-6602 specifications can be found in the NI 660x Specifications. The resolution of the count register is, as you’ve noted, 32 bits. This corresponds to a maximum count value of 4,294,967,295. As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal. Again, this is all found in the specifications.
You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
I hope this helps. Please post back if you have further questions.
Ed W.
Applications Engineer
National Instruments

Similar Messages

HT1349 How can i find out the size and length of my playlist?

How can i find out the size and length of my playlist? Anybody?

It shows up in iTunes on your computer as seen here:

I cannot update an app because I used a different ID when I purchased it and I have no record of it. How can I find out the ID and password

I cannot update an App because I used an ID and password to purchase the APP that I no longer can retrieve. Is there anyway that I can find out that information ?

Try here > Associating and verifying email addresses with your Apple ID
And here > Is there a way to find my Apple ID Name if I can't remember it?
Frequently Asked Questions About Apple ID

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How can I find out the dpi of an image in Acrobat.

How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
That opens a panel on the right.
To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

How can I find out the mail server from email address?

Hi:
How can I find out the mail server from email address?
for example: If I know the email address is [email protected],
how to find the pop3 and smtp mail server?
THANK YOU

You can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
Sean

How can I find out the screen size of the users moniter using the Acrobat SDK?

How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
Thanks,
Gregory

Currently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
Gregory

How can i find out the more than one times occurance of integer in a array?

How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

Kumar_Mohan wrote:
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

How can i find out the file size of a Keynote on an iPad please?

How can i find out the file size of a Keynote on an iPad please?

I think a rule of thumb is what you're looking for.
Full bandwidth CD audio (AIFF): about 10 MB/min
Apple Lossless: about 5 MB/min
MP3 @ 256k: about 2 MB/min
MP3 @ 128k: about 1 MB/min
Of course the MP3 file size is exactly linear with bit rate.
As for sound quality:
Apple Lossless is, as the name says, lossless.
MP3 @128k: fine for listening in the car or the kitchen etc. If you have an audiophile sound system, this will remind you why you spent all that money.
MP3 @256K: barely distinguishable from CD on very good equipment.
MP3 @320K: probably not distinguishable from CD.
I presume that since you're talking about importing classical CDs these are ones you own. Remember you can always do it again if you need higher fidelity or if better technology comes out. I import most CDs at 128k, since most of my MP3 listening is in the car, or walking, or as background. And I can always play the CD if I want to sit and listen.
The logic for purchased music is totally different -- you probably won't get to upgrade that without buying it some different way. So buying 128k MP3s (or AACs) is something you'll probably regret later. Buying 256k MP3s is a lot less problematic.

How can I find out the list of users who has the access to IT 0008

All,
How can I find out the list of users who has the W R permission for IT 008
for others?
SUIM doe not look like giving me the correct results.
Please advise.
Thanks,
From
PT.

combine tables AGR_1251 and table AGR_Users on keyfield AGR_USERS
in tabel AGR_1251 select on Field LOW values IT0008.OR W OR R,
noiw you get also other values
So better solution run the query twice over AGR1251 first on IT0008 and secondly on values W OR R and then the result over table AGR_USERS
Youu also might put an additional selection on object P* (only selecting HR objects)
output wll be UID in table AGR_USERS

I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these?

I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these? I saw a reply however, it was not my name and assumed it was for someone else. Now timed out. Can UI still have help on this matter please?

If you registered PSE before, go to the main page of adobe.com, sign in and go to your account and you should find the serial number there in your purchases.

How can I find out the audio sampling rate of BetacamSP tape?

Hi guys
I'm trying to digitize BetacamSP tape. But I'm afraid if I might choose wrong setting...
This tape is from very long time ago so we don't know which audio sampling rate we recorded with..
How can I find out the audio sampling rate of this BetacamSP tape?
Thanks:)

The sampling rate is set by the Sony DVMCDA2 you are using, when the conversion is made from the analog input to the digital (DV) output. You should be outputting standard DV which is 16bit 48khz audio.
Assuming you are in the US, your Easy Setup for FCP should be DV-NTSC, and then open the Log and Capture Pane and set the Capture Settings Device Control to Non-Controlable Device and you should be good to go.
You will have to roll the deck manually and start and end your capture manually.
You can download a user manual for the DVMCDA2 by clicking here.
MtD

How can i find out the table hierarchy

Hi experts,
I have one doubt. how can i find out the table hierarchy in the particular schema.
Let me explain my requirement in detail.. In my Database i have nearly 250 table each table have it's own temporary table(for authorization purpose we are maintaining the temporary tables) for each day i have to clear the temporary table data.
All temporary table connected with each other. i mean all the table having foreign key relationship.. while i attempt the delete the data from the temporary table it showed ORA-02292: integrity constraint violated - child record found.
So can any one please tell how can i delete the child table record first and then parent record table record.
Thanks in advance
Arun

CREATE OR REPLACE FUNCTION get_child_tables (
ptable VARCHAR2,
powner VARCHAR2 DEFAULT 'SCOTT',
plevel NUMBER DEFAULT 10
RETURN stringarray
-- -- create this ON SQL*PLUS "CREATE OR REPLACE TYPE STRINGARRAY AS TABLE OF VARCHAR2(50);"
-- AUTHID CURRENT_USER
PIPELINED
AUTHOR DATE VERSION COMMENTS
======================================================================================
[email protected] 26-OCT-2009 1.0 Developed to ease developers effort to find Nth level of Referential integrity
======================================================================================
-- PURPOSE -> To find PARENT=> CHILD relational TABLE(S) in Oracle upto a depth max N Level.
--SYNTAX TO USE
SELECT * FROM TABLE( get_child_tables('DEPT','SCOTT',3)); Store this query in a file for your use
SELECT * FROM TABLE( get_child_tables('EMPLOYEE')); Store this query in a file for your use
-- RESULTS looks as below
--1 => DEPT
--2 => EMP
--2 => EMP2
--3 => EMP_CHILD
--3 => EMP2_CHILD
-- and so on
--This can be leveraged to use in any oracle database REGION 10g having and above.
--This FUNCTION gives formatted result of the Oracle 10g Hierarchical query result coded in the cursor
--to find MASTER => CHILD relational TABLE(S) upto a depth max 10 Level.
--The result of the PIPELINED function can be retrieved using Oracle new operator
--TABLE(array name) in SQL query.
--Due to the AUTHID CURRENT_USER compiler directive any user can use based on his/her access privileges on the database.
--GRANT EXECUTE ON SCOTT.get_child_tables TO PUBLIC;
--CREATE OR REPLACE PUBLIC SYNONYM get_child_tables FOR SCOTT.get_child_tables;
IS
atname stringarray := stringarray ();
-- create this ON SQL*PLUS CREATE OR REPLACE TYPE STRINGARRAY AS TABLE OF VARCHAR2(50);
vlevel NUMBER;
vtname VARCHAR2 (50);
nindex NUMBER := 0;
bprocessed BOOLEAN := FALSE;
CURSOR c1 (powner_in IN VARCHAR2, ptable_in VARCHAR2, plevel_in NUMBER)
IS
SELECT LEVEL, LPAD (' ', (LEVEL - 1) * 2, ' ') || pt AS "TNAME"
FROM (SELECT a.owner w1, a.table_name pt, a.constraint_name c1,
a.r_constraint_name r1, b.owner w2, b.table_name ct,
b.constraint_name c2, b.r_constraint_name r2
FROM all_constraints a, all_constraints b
WHERE a.constraint_name = b.r_constraint_name(+)
AND a.owner = b.owner(+)
AND a.owner =
UPPER (powner)
-- Change Owner here while testing
--AND A.r_constraint_name IS NULL
AND a.constraint_type IN ('P', 'R')) v1
START WITH pt =
UPPER
(ptable)
-- Change your master table here while testing the QUERY
CONNECT BY PRIOR ct = pt AND LEVEL <= plevel;
-- Change lavel here while testing
BEGIN
atname.EXTEND;
atname (1) := 'NOTHING';
OPEN c1 (powner, ptable, plevel);
LOOP
bprocessed := FALSE;
FETCH c1
INTO vlevel, vtname;
IF nindex > 1 AND atname (atname.LAST - 1) = vtname
THEN
--DBMS_OUTPUT.PUT_LINE('2 ==== vtname ' ||vtname || ' '|| atname.count|| ' '||atname.last || ' '||atname( atname.last-1));
bprocessed := TRUE;
END IF;
IF NOT bprocessed
THEN
nindex := nindex + 1;
atname.EXTEND;
atname (nindex) := vtname;
PIPE ROW (vlevel || ' => ' || vtname);
DBMS_OUTPUT.put_line ( ' **** nindex - atname( nindex) '
|| nindex
|| ' - '
|| atname (nindex)
DLOG('ADDING ',vTname); A LOGGING ATONOMUS PROCEDURE FOR DEBUG PURPOSE
END IF;
EXIT WHEN c1%NOTFOUND;
END LOOP;
CLOSE c1;
FOR i IN 1 .. atname.COUNT
LOOP
DBMS_OUTPUT.PUT_LINE('atname (i) ' ||atname (i));
END LOOP;
RETURN;
EXCEPTION
WHEN no_data_needed
THEN -- THIS EXCEPTION HAS TO BE THERE TO GET THE FUCTION WORKABLE
DBMS_OUTPUT.put_line (SQLERRM);
RETURN;
--SELECT * FROM TABLE( get_child_tables('TB_XOP_LETR_TEMPLATE','OPS$CMS',5));
END get_child_tables;
Edited by: user3066657 on Jul 21, 2011 8:42 AM
Edited by: user3066657 on Jul 21, 2011 11:26 AM

How can i find out the height lenght width of that logo in so10 ?

I have TextName is there in so10.
How can i find out the height lenght width of that logo ?

Hi Sam,
In SE80, you should have a Repository for MIMES, including images.You should find your image here .
you have to use the following method to get the image as a binary string and then use gui_download to download it to local system
call method cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
exporting
p_object = fs_stxbitmaps-tdobject
p_name = fs_stxbitmaps-tdname
p_id = fs_stxbitmaps-tdid
p_btype = fs_stxbitmaps-tdbtype
receiving
p_bmp = loc_graphic_xstr
exceptions
not_found = 1
others = 2.
Thn you can find the size of the logo.
Regards
Naresh

How can I find out the age of my imac

How can I find out the age of my computer to see if it will be able to download latest operating system

Open System Profiler in Utilities folder. Look for the Model ID on the right. Then see the following:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

How can i find out the resolution and accuracy of PXI-6602 module?

Similar Messages

Maybe you are looking for