How can I find out when new tower will be activated

A New tower is and has been standing at 37062. How to find out when it will be activated?

If you can see it in a Safe manner ) If the tower is just off the Road usually there will be a Brown style building next to it Located on the Door next to the Tower you should be able to see a Verizon Plaque.. There usually Red Silver to Red n White if you see orange then it's a at&t Tower.. The Tower could also be a Digital County Tower for Police Sheriff Fire and EMS.. as well and not a Cellphone tower..

Similar Messages

HT1498 How can I find out when a movie will be available for rent?

How can I find out when a movie will be available for rent?

You can't. A movie's only available for rental if the copyright holder allows that; nobody except for them and Apple would know when or if a specific movie will be.
(102388)

How can i find out when the Creative Cloud be available in my country?

how can i find out when the Creative Cloud be available in my country?

This information is not available. We are working to add more countries, the newest being South Africa which will be added by the end of November. We are working to make this process more transparent. I understand how frustrating it is to not know if and/or when the Creative Cloud will be available in your country.

How can I find out when was a particular table last updated?

How can I find out when was a particular table last updated? I need to find out the usage of this table - when was it last updated, etc. Thanks in advance. The version I am using is Oracle 9i.

If you don't have any application level logging, and auditing is not enabled, there's not much hope.
You could, if you have archive logs available, go trawling through archive logs via logminer, but that's likely to prove painful and not very fruitful, unless you're very meticulous and patient...
-Mark

How can I find out when 1.9 is coming to my area

I live in 90266 in CA. How can I find out when 1.9 is going to be released in my area?

VZ does not publish the upgrade schedule. I think messages are sent to the STB a day or two before the upgrade occurs but that is it. I understand some information may be put on dslreports about the ugprades pending.
Being a community leader I don't even have access to the upgrade schedule. This is kept close to the folks within VZ. I can say that the east coast upgrades are put on hold while VZ CWA workers are striking.
Jim

How can I find out if a user has an active session

How can I find out if a user has an active session or sessionObject in the application Server.
When a user logs on to my web-application, I want him to be able to see a
list of all the other users that are also loged on. To do this I need to get a
list of all the session objects avaliable in the sever at that perticular moment?
In J2EE 2.1 I found the class "javax.servlet.http.HttpSessionContext" with the method "getIds()"
that returned all the session Id's. By using the method getSession(java.lang.String sessionId)
from the same class, you could then retrieve the sessionObject.
But these methods are depricated (and want to be able to use the
latest version of J2EE).
Is there any other way to do this?
I'm using JBoss application server.

Check out HttpSessionListener -> http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/http/HttpSessionListener.html
Essentially what you have to do is implement this interface. You also have to register the listener in your web.xml, like this:
<listener>
 <listener-class>
 package.name.YourListener
 </listener-class>
</listener>sessionCreated() will get called each time the app server creates a session and sessionDestroyed() will get called each time the app server invalidates a session. You could have a Map that contains all the active sessions, and a method for printing a list of all of the active sessions.

How do I find out when a release will be made containing fixes to known bugs?

I'm currently using Firefox 22.0 which is part of Ubuntu Precise (12.04). I have not been able to find out when a release will be made containing fixes to known bugs in Firefox. How do I find out when a release will be made containing fixes to known bugs?

For desktop
* latest release http://www.mozilla.org/firefox/notes/
* latest beta http://www.mozilla.org/firefox/beta/notes/
* latest Aurora http://www.mozilla.org/firefox/aurora/notes/
For mobile
* latest release http://www.mozilla.org/mobile/notes/
* latest beta http://www.mozilla.org/mobile/beta/notes/
* latest Aurora http://www.mozilla.org/mobile/aurora/notes/

How can we find out when master data was activated

Hello Friends,
We are loading master data for one info object directly from R3 to Info Object without PSA.
1) The Request Green in RSMO only tells that data is loaded successfully but it does not give any information about Activation is that right ?
2) How can i find out histroy of when one particular Info Object( Master data ) is activated? any tables or tcodes ?
Thanks
Tony

hi,
1) The Request Green in RSMO only tells that data is loaded successfully but it does not give any information about Activation is that right ?
Ans- yes it give loading details only.
2) How can i find out histroy of when one particular Info Object( Master data ) is activated? any tables or tcodes ?
ans -in SM37 chk any attribute change run is completed , else in RSA1 Tools -> apply attribute change and hierarchy -> you can see the finished and scheduled job.
also u can chk the master data table for any M version records is available.
Ramesh

Without opening the package. How can I find out when this ink expires?

Can I use the code on the packaging to find out when this ink expires? I do not want to open it.
Thanks. I appreciate your help!
This question was solved.
View Solution.

These ink cartridges don't have Expiry dates, so they don't have to be used up before a certain time. They do have a warranty ends date, which is lasermarked onto the cartridge body.
Hope this helps...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

How can i find out when i bought my i pad

Where can I find out the exact date that I bought my ipad

Go into your ITUNES, click on MANAGE DEVICES and check out the date you associated your device with your account, this will typically be the date you bought the device.

How do I find out when our exchange will be upgrad...

Our exchange is very small (around 35O lines) and we are a long way from it - 4km. At the very best - early in the morning - we can get 1.5mb download and 0.35mb upload. By the time everyone else is on it in the evenings it doesn't really work at all - so slow you can't check the speeds. Have done all we can locally, am a county broadband champion, but seems impossible to find out when the BT exchange will be upgraded. Suspect we are too rural and will be in the 10% not covered by the Government's weedy promise of 2015. Such a missed opportunity - as better broadband would be a fantastic boost to rural economies and save fuel. Anyone know how a) you can find out the plans and b) what's the best way to lobby?

Hi,
Your exchange is probably ADSLMax enabled giving your speeds of up to 8mb. The upgrade your probably talking about is the upgrade to BTw's 21cn network which enables ADSL2+ at your exchange. ADSL2+ is upto 20mb.
You can check if your exchange is going to be upgraded here: http://www.samknows.com/broadband/broadband_checker
However if you have a long line then a good stable line on ADSLMax may not be a good stable line on ADSL2+ as ADSL2+ is more aggressive to any noise on your line.
Once BTW and Openreach have upgraded your exchange it can take days/weeks/months till your line is upgraded to ADSL2+ as they are manual transferred to the new equipment in the exchange in batches.
If your on a ling line then you might be moved to BTw's 21cn network but kept on ADSLMax.
If your able to supply your ADSL Line Statistics and a BT speedtest we might be able to tell you if you will benefit from ADSL2+.
1) ADSL Line Stats Help
If you have a BT Home Hub like the one below...
Then:
1) Go to http://192.168.1.254 or http://bthomehub.home
2) click Settings
3) Click Advanced Settings
4) Click Broadband
5) Click Connection or sometimes called ADSL (see picture Below)
The direct Address is http://bthomehub.home/index.cgi?active_page=9116 (for bthomehub3)
2) can your post your BT Speedtest results by using http://speedtester.bt.com (not beta version) [best done with a wired connection ie Ethernet]
cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

How can I find out WHEN a specific iPhone was reported stolen?

I bought a storage unit at auction. There was a brand new iphone 4S, among other items, in the locker. Many had receipts with the owner's name so I know it wasn't a storage unit full of stolen merchandise. I ran a check of the iphone through a website, imei.info, and it seemed to come up clean (Verizon locked). The Ebay buyer backed out of the auction and now, days later, is claiming the phone is stolen. I'm thinking the buyer for some unknown reason, is the one who reported it stolen, just recently, and is trying to scam me. When I called Verizon, they confirmed that this phone was either lost or stolen but could not tell me when it was reported.
DOES ANYONE KNOW HOW I CAN FIND OUT THE DATE THE PHONE WAS REPORTED STOLEN, AND POSSIBLY WHO REPORTED IT STOLEN?
Many Thanks!!!
Anthony

Buyer fraud has become a problem on eBay.
I ran a check of the iphone through a website, imei.info, and it seemed to come up clean (Verizon locked).
It probably would have been better to contact Verizon directly, but if you kept records of that research, use it to dispute the buyer's subsequent claim. Unfortunately, eBay buyers hold all the cards these days, and eBay's robots will simply order you to accept a return or face suspension of your account and seizure of your PayPal assets.
To dispute a SNAD may require that you obtain a court order to subpoena Verizon's record of the theft, which will entail an expense that will almost certainly exceed absorbing the loss.
Ebay is a buyer's paradise. For sellers, not so much.

How can I find out the new row.

I use below coding to create a new row,
row =vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
My question is how I can find out it later?
thx.

If you have just inserted one row, then getCurrentRow should work.
in case you have inserted multiple rows after doing a setattribute, or setting the PK values in EOImpl, then you would need to loop through the VO and find the ro that matches the values using getAttribue method.
Thanks
Tapash

How can I find out when my machine (or any Mac) was made?

I thought there was a place where you put your serial number in and was able to fin out when the manufacture date was.

Welcome to the Apple discussions
You can enter your serial number at http://support.apple.com/specs/#powerbook and it will tell you what specific model Powerbook you have, so at least you can bracket the build date between models. If you have an active Applecare agreement on a system, there may be more detail, however, I think most Applecare's have expired on Powerbooks. Otherwise, I'm not aware of anyplace you can find the build date of your system.

HT201364 I'm not certain if my Mac Pro was made in early 2008. How can I find out when it was made?

Like many video editors, I am eager to upgrade to the new FCP 10.1, but I'm not sure if my Mac Pro can run Mavericks (a requirement for the FCP 10.1 upgrade). The Apple page states that Mac Pro's made in "Early 2008" should be okay, but how can I tell before diving into the upgrade? I can't afford to buy a new Mac Pro right now.
Thanks in advance for any help!

Thanks for the assistance! Turns out my venerable Mac Pro was manufactured in 2007, so Mavericks (and FCP 10.1) will have to wait until I buy a newer system.
All the best,
Tony

How can I find out when new tower will be activated

Similar Messages

Maybe you are looking for