How can I find out why update reader11.07 will not load on mavericks?

Is there an Adobe tech out there who can tell me why? or another user having the same issue?

I googled my problem and found myself at some place with a link
This was not an Adobe Forum.
I clicked the link (legitimate) and the update was perfect.
When I first went to adobe to update , it failed. Gave me some error thing.[ I never update from a popup.]
Only from the real website. I tried to get help from chat and they referred me to the forum where I guess you found my question.
I hope this helps someone. All is good now.

Similar Messages

Getting the error "Adobe Send cannot currently send this file" how can I find out why?

Getting the error "Adobe Send cannot currently send this file" how can I find out why?

Hey James,
Please let me know what kind of file are you trying to send using 'Adobe Send' online service.
Does this happen with every file you try to send or any specific one?
Have you tried using a different browser? What happens? Check with your internet connection speed as well.
Hope to hear from you.
Regards,
Anubha

HT1498 How can I find out when a movie will be available for rent?

How can I find out when a movie will be available for rent?

You can't. A movie's only available for rental if the copyright holder allows that; nobody except for them and Apple would know when or if a specific movie will be.
(102388)

How can I find out the overall time and not only the time of a single clip?

I have set up two cameras in one room. Both cameras record the same thing from different perspectives at the same time. I have found an interesting scene for video 1 (recorded by camera 1). Now I would like to find the time at which the interesting scene takes place in video 2.
However, I have not seen any way to get displayed, at what time the scene starts in relation to the total length of the video (e.g: scene starts after 5 minutes from total 10 minutes).
The indicated time refers only to a part of the clip and not to the overall project, even if a special clip is not selected. Does anyone know, how I can find out the time?

Go to Settings>iCloud>Storage & Backup. It will be shown just below the Back Up Now button at the bottom.

How can I find out the strings that will be presented to the UI

Hi All,
I am working on a Swing based application (Swing based UI)
I am requested to do the following on the bytecode of that application:
I am supposed to find out what strings from within that bytecode will be presented to the UI and what will be used for an internal usage.
i have no way of running the application to verify that, i can only work on the static bytecode files.
hard question ha?
Thanks,
EItan.

You would of course have to run it. Either via a VM or recreating a VM yourself.
As an example of that how would you figure out what string occurs in the following (pseudo) code?
String msg = (cnt > 1) ? ("files=" + cnt) : ("file=" + cnt);
if (cnt > 1) DisplayMessage(msg);

How can I find out when new tower will be activated

A New tower is and has been standing at 37062. How to find out when it will be activated?

If you can see it in a Safe manner ) If the tower is just off the Road usually there will be a Brown style building next to it Located on the Door next to the Tower you should be able to see a Verizon Plaque.. There usually Red Silver to Red n White if you see orange then it's a at&t Tower.. The Tower could also be a Digital County Tower for Police Sheriff Fire and EMS.. as well and not a Cellphone tower..

How can I find out WHY a user keeps becoming disabled in WGM?

I know users are disabled after a certain number of incorrect login attempts, in my case it is se to 7.
But one user keeps becoming disabled for no obvious reason. The user in question just logs into FTP.
Once it has been disabled, I try re-enabling it but if I quit WGM and re-open they will be disabled again straight away. I have to delete the user and re-create them with the same UID for it to stay active.
Its highly unlikely that the user is entering the password incorrectly this many times!

It can maybe be an old alias or something like shared fonts from a server share trying to login.
Maybe not even on the same machine.
Check logs.

How can I find out why my apple I'd is disabled?

I was purchasing apps and suddenly my Apple Id has been disabled. What do I do to get it dis-ambled?

Hi..
Use the iForgot link to reset your Apple iD account here > Apple ID: "This Apple ID has been disabled for security reasons" alert appears

I want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized?

i want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized? also how can i update the software?

This is a tedious solution, which is stupid! And some users report an inability to reauthorize a computer after an "en masse” deauthorization. I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge!

How can I find out if I need a BIOS update?

I have a Yoga 2 Pro. How can I find out if I need to update the BIOS?
Solved!
Go to Solution.

If it ain't broken, don't fix it. This is expecially true with the BIOS.
Unless you are trying to fix a particular issue and you believe a new BIOS will help, don't touch it. The BIOS is one thing that can brick a computer should something go wrong during the flashing process.

How can I find out when was a particular table last updated?

How can I find out when was a particular table last updated? I need to find out the usage of this table - when was it last updated, etc. Thanks in advance. The version I am using is Oracle 9i.

If you don't have any application level logging, and auditing is not enabled, there's not much hope.
You could, if you have archive logs available, go trawling through archive logs via logminer, but that's likely to prove painful and not very fruitful, unless you're very meticulous and patient...
-Mark

How can i find out what or why mac is running so slow ?

My Mac is running as slow as a week in jail , how can i find out what is causing it , I have 1TB memory , using 635 of it at the moment. i'm using version 10.7.1 , lion. It just seems so slow to respond to anything , start up , open an app , go from one song to another in iTunes , go from one event to another in iPhoto , everything is slow . any ideas out there folks ? I'd appreciate the help.
Thanks .

Here is all the information i can muster , I still can't find RAM .
Processor 3.2 GHz Intel Core i3
Memory 4 GB 1333 MHz DDR3
Graphics ATI Radeon HD 5670 512 MB
Software Mac OS X Lion 10.7.1 (11B26)

How can we find out data in an editable ALV grid has been changed or not?

Hi Experts,
How can we find out whether a data in an editable ALV grid has been changed or not.
I am using the
FM -> REUSE_ALV_GRID_DISPLAY_LVC
for ALV display.
I have to chekc whther data has been changed or not befor saving. if changed then only i want to
SAVE
. I cannot use the internal table comparison method for this purpose also i am not using OOP ALV.
So kindly sugest me an alternative.
Thanks and Regards,
Shahana

Hi,
Thanks for your answer. I already saw this post.
See this method.
CALL METHOD reuse_alv_grid->check_changed_data
IMPORTING
e_valid = lv_check.
This will update the internal table with the edited values. Then we can go for internal table comparison.
But my scenario will not allow me for itab comparisons.I just want to know the ALV data has been changed or not.
Regards,
Shahana

How can i find out the file size of a Keynote on an iPad please?

How can i find out the file size of a Keynote on an iPad please?

I think a rule of thumb is what you're looking for.
Full bandwidth CD audio (AIFF): about 10 MB/min
Apple Lossless: about 5 MB/min
MP3 @ 256k: about 2 MB/min
MP3 @ 128k: about 1 MB/min
Of course the MP3 file size is exactly linear with bit rate.
As for sound quality:
Apple Lossless is, as the name says, lossless.
MP3 @128k: fine for listening in the car or the kitchen etc. If you have an audiophile sound system, this will remind you why you spent all that money.
MP3 @256K: barely distinguishable from CD on very good equipment.
MP3 @320K: probably not distinguishable from CD.
I presume that since you're talking about importing classical CDs these are ones you own. Remember you can always do it again if you need higher fidelity or if better technology comes out. I import most CDs at 128k, since most of my MP3 listening is in the car, or walking, or as background. And I can always play the CD if I want to sit and listen.
The logic for purchased music is totally different -- you probably won't get to upgrade that without buying it some different way. So buying 128k MP3s (or AACs) is something you'll probably regret later. Buying 256k MP3s is a lot less problematic.

How can I find out user id who has deleted payment order

Issue : After payment run, the required information has been sent as Idoc to the bank. So, we know the payment order number. We observed that another payment run also has picked up this vendor invoice and made payment.
Usually Payment Sent will be marked X until the related information comes in the form of bank statement upload and this amount gets cleared.
We noticed that bank has made two payments for this amount to this vendor on different dates :- a) when the payment order supposed to be paid as per the payment terms and b) when second paymnet run paid the amount [ this time it got paid directly as there is long due amount ].
From SAP APP angle, both the payment run worked fine and also the calcaltion of payment terms as well.
So, we come to conculsion that someone has deleted the payment order from the system. Thats the reason this invoice got picked up by 2nd APP and paid the amount.
Where we could not find the related entry in REGUH/REGUP tables for this payment order and no document changes.
Question: How can I find out user id who has deleted payment order. Appreciate any clue / answer for this issue please.
Thank you
Sri

Hello,
Not sure about deletion logs. =/
Idea:
What if an error occured during the first payment? Have you checked sm13 to check if any update termination occured in the payment program?
Regards,
Renan

How can I find out why update reader11.07 will not load on mavericks?

Similar Messages

Maybe you are looking for