How can i find PR from Sales orders?
As we know,we can relate the Sales order and Purchase order from table EKKN.
But when we haven't creat the purchase order,how can find purchase request order form sales order NO.??
TKS a million~~
Hi
Very simple to find out go to ME53N in item details click account assignment tab in that you have AccAssCat E and Order field you will find the sales order number.
If you want to see some collective data use ME5A and select Scope of List as ALV and Account Assignment Category as C for sales order.
Thanks
S.Murali
Similar Messages
-
How can I find ringtones for sale in iTunes? I don't see it as a category anywhere.
how can I find ringtones for sale in iTunes? I don't see it as a category anywhere.
Ferretbite wrote:
You could also download the Ringtone Maker all for iPhone in the AppStore and create your own custom ringtones and message tones.
Not needed.
Easy enough to do in iTunes.
Find the song you want and note the start/stop time you want the ring tone.
Right click - get info, click the Options tab and set the start/stop times as above.
Right click - Create AAC version. This creates a new file.
Drag this new file from the iTunes window to the desktop.
Delete the file from iTunes and also select Delete from hard drive.
On the desktop, rename the file whateveryouwant.m4r (first part you can change to whatever you want & change the extension to .m4r).
Drag the file back to the iTunes library at top left.
Make sure iTunes prefs > General has Tones ticked. -
How can I use the field "Sales Order" on derivation?
Dear All.
This is about PA characteristic derivation.
I want to change the characteristic value "Sales Order (KAUFN)" by derivation.
But I cannot select the characteristic field on target field.
The field "Sales order(KAUFN)" doesn't exist there.
Why? How can I use the field "Sales Order" on derivation?
Y.C.BaeHi Bae,
in order to be able to choose fields KAUFN (for sales order) and KDPOS
(for sales order item) as target fields of derivation step 'enhancement'
you have to modify the coding of subroutine EXIT GET_ALLOWED_TARGETS
in program RKEDRCOPA like this:
NAME-IDENTIFIER = 'CO-PA'.
NAME-TABNAME = FIELDTAB_ENTRY-TABNAME.
NAME-FIELDNAME = FIELDTAB_ENTRY-FIELDNAME.
IF FIELDTAB_ENTRY-USGFL CA 'DUV'
BEGIN OF INSERTION *****
OR FIELDTAB_ENTRY-FIELDNAME = 'KAUFN'
OR FIELDTAB_ENTRY-FIELDNAME = 'KDPOS'
END OF INSERTION *****
OR FIELDTAB_ENTRY-FIELDNAME = 'KNDNR'
OR FIELDTAB_ENTRY-FIELDNAME = 'ARTNR'
Actually sales order number and sales order item shouldn't be changed
by derivation (therefore they are no valid target fields in standard)
but if you need to fill them within an enhancement this modification
will help you to define them as valid target fields. But this is just
the technical frame so far; the logic from which table you'd like to
derive the sales order number correctly depends on your implementation
of the enhancement! I just want to ask you to be rather careful with
the implementation of the exit so that the sales order number isn't
changed in cases that shouldn't be concerned.
Regards,
Abhisek -
How can I create a new sales order template
Hello,
how can I create a new sales order template in SAP CRM 7.0 (Web UI)? I want to use this sales order template in scenario ´'Mass Generation of Sales Orders via Marketing Projects'.
Thanks for your support in advance.
Best regards,
anvanHi,
Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
regards Camilla -
How can I create a new sales order template in SAP CRM 7.0
Hello,
how can I create a new sales order template in SAP CRM 7.0 (Web UI)? I want to use this sales order template in scenario ´'Mass Generation of Sales Orders via Marketing Projects'.
Thanks for your support in advance.
Best regards,
anvanHi,
Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
regards Camilla -
My ipad stores my documents in iCloud. How can I find them from a different computer? I used to use a memory stick and could work on my documents on any computer and want to have a replacement system using documents created on my ipad - I can't use a memory stick with it.
How do you know that they are on iCloud, the iPad can (and does) save locally. If they are on iCloud they will be accessible via the application that created them (Pages, Numbers etc) and can be reached from any computer with iCloud access by logging to iCloud.com. But you did that and stated that they are not there, so what makes you think that they are?
-
How can I find history from a specific website on my MacBook Pro?
How can I find history from a specific website (such as: time spent on that website and things of that nature) on my MacBook Pro? I would also like to see if I can get a detailed history for other things done on the computer, such as: Date & Time Spent running a specific application, etc.
Not so much.
You can try 3rd party app for example http://timingapp.com/ -
How can i find out in apple order what week my ipod is ?
How can i find out in apple order what week my ipod is ? its says it was shipped today.
Message was edited by: Matt kidddont matter now its a week 38 it sed on the invoice
Message was edited by: Matt kidd -
I can't remember my security questions. How can I find the answers in order to purchase my first app?
Go to: expresslane.apple.com
Under product categories choose iTunes
Then iTunes store
Then account management
Press continue.
Now choose iTunes store security and answer the bullet questions and click continue.
Sign in with your appleid and press continue
Under contact options fill out the information and advise iTunes that you would like your security/challenge questions reset. Click send.
iTunes will respond to you within 24 hours by email. -
I lost one calendar from my Mac Osx 10.5.8 system on G4 how can I find it from time machine backup?
Can someone help me with that pls !!!!!!https://discussions.apple.com/thread/5176639
-
How to trigger an Idoc from Sales order creation and change
We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
Follow the below steps:
1. Go to NACE transaction
2. Select V1 application and select OUTPUT TYPES
3. Select the required output type and double click on Processing routines.
4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
5. Save it.
message type ORDERSP in the distribution model (BD64).
Follow the below steps to configure the condition records:
1. Go to NACE
2. Select V1 application and select CONDITION RECORDS
3. Select the requred output type and click on Condition records
4. Selection screen will be displayed.
5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
Sales doc type = OR
Funt = SP
Partner = blank. It means there is no restriction on partner numbers.
Medium = A
date/time = 4
Lan = EN.
Note: partner is left blank means, the sales order of type OR can be send to all partners.
6. Save it.
We also done ALE configuration.
We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
Kindly suggest the solution.
Regards,
Sharad DixitHi ,
Please check the total error description and diagnosis as below :
InVa02 enter SO go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
Please paste the diagnosis .
Thanks and Regards,
P.Bharadwaj -
how do i find out what was ordered in my itunes account, i have some charges that i do not recognize. i have multiple devices on the same account.
Hello, chunnyb.
Thank you for visiting Apple Support Communities.
Here are the steps on how to view your purchase history in iTunes.
iTunes Store: See your purchase history and web order numbers
http://support.apple.com/kb/ht2727
If you need to report and issue with a purchase, see the article below.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Cheers,
Jason H. -
How can i get the open sale orders for given material no and plant
Hi,
I have to retrieve the open sale orders depending on the material number and plant.
For only open sale orders at header level and item level.
I want to use VBUK-GBSTK to find open sale order at header level and
VBUP-GBSTA at item level.
Can any one suggest me the best logic as performance is concerned?
Thanks,
Kumar.hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
vbeln
posnr
matnr
werks
erdat
kbmeng
vrkme
from vbap
into table it_vbap
for all entries in it_plant
where matnr = it_plant-matnr and
werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right? -
How to do partial Billing from Sales order
Hi Sap Gurus,
Could any one help me out how i can do partial billing from a sales order. I have 5 line items in SO and only want 3 items out of that to be billed so my sales order should be stated like partially billed.
Please give some suggestions
Cheers
EdieHi,
You may create a status profile to put "Billing Block" for Sales Doc type at header level.
T.Code: BS02/ OBIS
This will automatically put a Billing-Block at the items levels, as soon s you will create and save Order.
Alternatively, if you are not willing use to Status-Profile, Goutham has already explained the process* in his post
Best Regards,
Amit.
*Note: Relevant Copy-control settings must be maintained in VTFA for Target Billing from Source Doc. -
How to do Goods Issue from Sales Order Stock?
Dear All,
we are doing a trading Scenario & based on customer requirement we procure the goods from our vendor & we receive it to Sales Order(special) Stock. Now what are the settings to be done in the Sales/Shipping so that when we do a delivery for our customer the Stock is Issued from our Un-res Sales Order Stock & not from un-res stock ?
Hope its clear.
Regards,Hi Sam,
Thanks a lot for the reply.
Sorry for not explaining the scenario in the begining.
See I have to configure a trading Scenario with some changes from the std.
As in trading Process there are 3 entities.
1. Customer - X
2. Company - Y (Who performs trading)
3. Vendor - Z
Following is the breif requirment.
Company Y generated an inquiry in system for an item with respect to customers RFQ. Now since Y doesnt manufacture the product(item) it creates a PR in background with respect to inquiry.
Based on this PR, Y procures & receives the good into Un-restricted Sales Order Stock (with ref Inquiry doc no:).
Now based on price Quoted by Z, Y will create a Quotation with ref to inquiry & finally a SO for Customer - X with ref to the Quotation.
Now at the time of delivery (creatd with ref SO) system is not able to issue the goods from the sales order stock since the stock is stored with ref to inquiry no: & delivery is with ref to SO.
So I am planning to simulate a cycle by creating a delivery & PGI with ref to Inquiry.
If you can suggest a way out, it will be highly appreciable.
Hope its clear.
Regards,
Maybe you are looking for
-
I try to run the ausp dbtable. with entries of object: 00001019680 and more that 1300 entries Inter char. sr_code classtype: z01 the problem is display in a short dump with this message There is no help text for this runtime error either the text was
-
Using the lighting effects filter causes my CS6 to crash
Hi, I read other threads with people have issues with their PC, but I am not able to follow them to correct my issues. When I open a JPEG file from my mark iii into CS6, I try to start a new layer and then add the lighting effects filter. CS6 crashe
-
Blackberry Desktop Software Failed to validate your blackberry device
Blackberry 8310 was running slow. The people at the ATT store said I need to update the software. Downloaded the newest version to the desktop and when I tried to upload it to the phone received the following message "Blackberry Desktop Software Fa
-
Our Motorola qip6416-2 suddenly is producing a very low volume on the volume out connectors. Volume to the TV is OK, but we have both a stereo and a TV-Anywhere hooked up to the audio out, and the volume on both has taken a sudden plunge. Any sugge
-
I have 2 libraries with 2 users ( didn't notice that one of my CDs was on other account until now ). So I'm asking if there is a possibility to move all songs from my first account to my second, without authorizing new computer? Thx.