How can I find  sync message  in Adapter Engine Table

Hi,
I see async message in Table(XI_AF_MSG , XI_AF_MSG_AUDIT)
But don't see sync message.
Where is sync message stored in Adapter Engine?
Can anybody help me!!

Hi,
Refer this Doc..
http://help.sap.com/bp_bpmv130/Documentation/Operation/TuningGuide.pdf
regards,
vasanth.

Similar Messages

  • How can we prioritize the messages in Adapter engine

    Hi Experts,
    I want to prioritize the messges in adapter engine, How can i do this?
    Thanks in Advance
    Srinivas

    Hi,
    did you check help.sap.com ?
    http://help.sap.com/saphelp_nwpi71/helpdata/en/46/6ffe8effc20eede10000000a155369/content.htm
    Regards,
    Michal Krawczyk

  • I have made my iphone 4s restore by accident. how can i find my messages?

    i have made my iphone 4s restore by accident. how can i find my messages?

    Do you have a backup?  If you restored as new, your messages were deleted.  Unless you have a backup to restore from, they are gone permanently.  Do you regularly backup in iTunes or to iCloud?

  • How can I find out when was a particular table last updated?

    How can I find out when was a particular table last updated? I need to find out the usage of this table - when was it last updated, etc. Thanks in advance. The version I am using is Oracle 9i.

    If you don't have any application level logging, and auditing is not enabled, there's not much hope.
    You could, if you have archive logs available, go trawling through archive logs via logminer, but that's likely to prove painful and not very fruitful, unless you're very meticulous and patient...
    -Mark

  • How can i find the messages in the log

    I want to see the all the error/information messages in the message log (buffer) , how can i view them? is there any table or function module for that?
    I'm trying to delete  error/information  messages before a user can see on the screen in the sales order creation process.
    Hope I'm clear with my question !
    Edited by: aday rao on Oct 30, 2009 6:41 PM

    There are few messages creating confusion the  users regarding a creditcard authorization we want to delete them .
    Here is the scenario ....
    we have a custom program in which
    Creating the order using FM      CALL FUNCTION 'BAPI_SALESDOCU_CREATEWITHDIA'
    once the order is created and saved we display the same saved order for the user with code below ...
    set parameter id 'AUN' field SALESDOCUMENT.
    call transaction 'VA03' and skip first screen.
    But in between the order  save and siaply , creditcards authorization program will kick in the background  if it has some errors , these errors are displayed in my VA03 screen initial screen.  I'm planning to remove them from the log .

  • How can you find out whether anything in a table's been selected?

    How can you find out is there anything(a cell or a row) in a table's been selected???
    it's doesn't matter which cell or which row's been selected in a table, but just to know is there anything been selected
    I can't figure out the code to do that >.<
    is there anything to do with
    bookTable.getCellEditor()?

    How can you find out is there anything(a cell or a row) in a table's been selected???
    it's doesn't matter which cell or which row's been selected in a table, but just to know is there anything been selected
    I can't figure out the code to do that >.<
    is there anything to do with
    bookTable.getCellEditor()?

  • How can I find/sync my old iPhone camera roll photos?

    I've searched about 5 different ways here on the forums and can't find an answer to this question. I recently upgraded my iPhone 3Gs to an iPhone 4. I backed up the old phone and just sold it a couple of days ago. Here's my problem: I can't find the folder containing my (old) camera roll photos so I can sync them to my new iPhone. I'm aware that iTunes doesn't back up camera roll photos, however I understand they are saved as part of the standard backup process. Are they included in the "iPod Photo Cache" and, if so, can I use this to copy them onto my new phone? Note that I was unaware until today that I can save camera roll photos on my PC using Windows Camera and Scanner or Adobe Photoshop; I'll start doing that tonight so I'll have them in a separate folder from now on. I'm running Windows Vista on my PC, FYI.
    Thanks,
    Steve

    Is there a way for me to save what's currently on my phone?
    No. If you restore your new phone from a previous backup, all data on your phone will be erased & replaced with the data from your backup. However, if you don't want to do that you can see if this will recover the photos in question from your 3GS backup:
    http://www.iphonebackupextractor.com/

  • TS2755 I am trying to find a message from 2012 and when I load previous messages it only goes back so far then the program quits and sends me to the home ( main) screen. How can I find the message and get around this?

    I am trying to access a message from early 2012. When I load previous messages It will only go back to oct 2012 and then the program stops and kicks my to the home page. Anyone know how I can get to the message? Thanks.

    Try Spotlight Search
    1. From any Home screen page of iPad, drag your finger down anywhere on the center of Home screen.
    2. Spotlight search will now appear and you can search for apps, texts, or any other content you'd like just as you did on previous versions of iOS.

  • How can I find all messages like this?

    What criteria can I use in a smart mailbox to find all messages like this?
    The message from Robert Nicholson <[email protected]> concerning “Hi Testing” has not been downloaded from the server. You need to take this account online in order to download it.
    I have a lot of these because I use IMAP for my mail but there's no point in keeping these messages as they were deleted from the server a long time ago.

    Robert,
    I am not sure what a Smart Mailbox would have to offer with respect to this?
    However, the problem is likely not that the message has been deleted from the server, but that Mail 2.0 has problems with some IMAP servers at displaying some messages.
    I am hopeful, but cannot assure anyone, that a fix is being worked on for this, and perhaps will be available sometime in the future.
    If you were to access with a different version of Mail, such as 1.3.11, or another mail client, you might access these messages. Therefore, I would not be quick to try and eliminate them.
    Ernie

  • How can I find error message according to DAC etl task error code?

    Hi all,
    I run the DAetl tasks accroding to the BI APPS installation guide for Financials - Receivables.
    While I found some task result in errors and restart the run can't resolve them.
    I looked at the error tasks and found in the task detail page some index creating step got error. It indicated error code 1542, howerver I can't find any valueable error message.
    Is't a dac error code or informatica error code? where is the document that list all the error code,error message, root cause and solutions?
    Thanks & Regards,
    Scott
    Edited by: Typhoon on Jun 30, 2009 11:21 AM
    Edited by: Typhoon on Jun 30, 2009 11:37 AM

    Hi
    First try to run the workflow of that mapping individually by hardcoding the parameter values........and running through Informatica monitor itself.......later you can revert the changes.......In this way you can findout whether there is some problem in Informatica mapping or DAC configuration....If the problem is at Informatica mapping I think you need to change the session property for target as "Normal" Instead of "Bulk"(because you have indexes being created for the target which would be set record wise.....). Hope this helps
    With Regards
    Ven
    Edited by: user11254581 on Jun 29, 2009 10:58 PM

  • How can I find the largest BLOB in a table and how big it is?

    Hi
    I have a massive table with 10 million rows storing images as BLOBS as well as some other data.
    Is there a way that I can find which is the largest BLOB in it and how big it is?
    Any help would be appreciated
    Flaz

    select max(dbms_lob.getlength(blob_column)) from table
    remove the max to get the length.

  • How can I find overset text in a InDesign table and locate the page?

    I am currently using CC but see the same issue in CS5 as well. If text within a table is overset or cannot be displayed, I can use search/replace for a term that I know is in an affected cell, however InDesign will find the first instance but will not automatically navigate to the page. Instead it remains on whatever page I happened to be on.

    For product specific questions you may do better in the specific product forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right to open the drop down list and scroll
    http://forums.adobe.com/community/indesign

  • How can i find number of columns in a table ....... it's higer priority

    hi
    i wnat find the number of columns in a table.
    is there any predefine fiunction. pls tell me

    Thanks for correction!
    I asked myself that question after posting previous post... started to search in Documentation but you were faster.
    Thanks again!
    Message was edited by:
    Faust
    Edit:
    Dear thread users!
    You have here (in my post in this thread - see above) good example for inappropriate post in one thread.
    I posted to fast - I didn't realise am I sure what I wrote!
    Consequence was that, after posting, I asked myself is it correct my statement about rights on SYS-objects, I started to search for answer, etc.
    So what I want to say is: if you don't want to find yourself foolish, like I found myself, don't post before you are sure is it correct what you wrote!
    Cheers!

  • How can I find out the name of the table by knowing the type_id #

    Is that possible though? I know the type_id from viewResults.jsp page, but, it doesn't say which table it belongs to though! I have to know the table name to copy over updated data.

    right, which is a column... so no, I don't think you can get the table name from that... Maybe from ResultSet itself... I'd have to look at the API docs to be sure, and I'm sure you can do that just as easily.
    But as I said, you have a ResultSet, that must've come from a query, which must've had the table name(s) in it...

  • How can I find number of columns in a table using a query

    Hi
    I want to find the number of columns in a table using a query.
    Any help in this regard is much appreciated.
    Cheers

    Hi,
    This is the output i get when i executed ur query
    OWNER     OBJECT_NAME     OBJECT_TYPE
    SMLDBO     T2311_SURVEY_QUESTIONS     TABLE
    select OWNER,OBJECT_NAME,OBJECT_TYPE
    from all_objects
    where OBJECT_NAME = 'T2311_SURVEY_QUESTIONS';
    works Fine.
    But if i use the below query it returns : 0
    SELECT count(*) FROM user_tab_columns
    WHERE table_name =upper( 'T2311_SURVEY_QUESTIONS');
    What could be problem.
    The table exists + name of the table is correct + it resides in my schema itself.
    Any guess !!!

Maybe you are looking for

  • Error while loading shared libraries: libjvm.so

    Hi, Hopefully, this is the right list for this problem. I am working on a computer that has Linux 2.6.20-1.2952.fc6. I am trying to deploy a program to a Sun SPOT using over-the-air functionality; however, I get the following message: -pre-suite: -do

  • Not able to Use FaceTime:

    Here are the steps I followed to activate my FaceTime: 1.Seeting> facetime> enter Apple iD Screen opens up. 2. i enter the apple id and pass word hit signin button 3. next screen appear with question "People will call you using .......you like to use

  • How to Access Space on a large Hard Drive (Solaris 10 Running)/

    Good morning everyone, I have looked back a year on this forum and on hardware forums and I don't see this topic covered. Recently I installed Solaris 10 on a Sun Blade 150. Not being very smart, I accepted the default settings. The computer only see

  • Imovie Can't Find Music

    Hey Everyone, Been working on a rather long video with about 5 music files added as background. It worked fine all day, I closed it to make dinner, come back after dinner and imovie "*The song "___" could not be used because the original file could n

  • IPhone 4 wifi not working with apple wireless network

    Hello everyone, I am having a strange problem with my iPhone 4. It won't detect the wireless network, I have a time capsule with an airport express. I have another network that is not an apple hardware and that runs fine but slightly weak. At the off