How can I find the devices that use my Apple ID

I Need to find the devices that use my apple ID

Store > View Account. On the Account Information page, click on Manage Devices, and you will see the list.

Similar Messages

HT4623 I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

Hello anacc,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
Best of luck,
Mario

How can I find the user that created a user account and the user who last updated the account

How can I find out who created a user account and who last updated the account. I think that this is the same information that is displayed in the description field on the General tab.
I am using ADO commands and vbscript
ug3j

I should point out that there are two attributes of all AD objects that can help you track down the correct information in the system logs. These are the whenCreated and whenChanged attributes. This will tell when the object was created and when it was last
modified, which should help when you search the logs. Also, while whenCreated is replicated to all DC's, so they will all have the exact same creation time, the whenChanged attribute is technically not replicated. The date/time on each DC reflects when
the last modification was replicated to that DC. The values will differ slightly on each DC, reflecting how long it took for the change to replicate.
Richard Mueller - MVP Directory Services

How can I find the buttons that there are in Searchaccount view IUICMD ??

Hello experts,
Could you tell my where can I find the buttons ("Search", "Reset", "Create Account") that appear in the view "SearchAccount", please could help me??
Thanks in advance.

Hi,
Go to the Search Account View IMPL class-CL_IUICMD_SEARCHACCOUNT_IMPL.There you will find the method DO_INIT_CONTEXT.Inside that method, coding is there to place buttons on the view.
The buttons can be placed anywhere-DO_Prepare_output,Do_init_context or IF_BSP_WD_TOOLBAR_CALLBACK~GET_BUTTONS method in the IMPL class.So you can either try looking into these methods or you can look into the html coding.There you will find a variable called gt_buttons(not always, but mostly it will be there).You can use the where-used-list of gt_buttons to find where it is getting filled.
Hope this helps!
Regards,
Rohit

IPad (1) bluetooth only "searches".. doesn't find. All works on my IPhone 4, but the IPad can't "find" the devices. Using Motorola behind the head and Rocketfish behind the head headphones.

I have both Motorola and Rocketfish behind-the-head earphones. Both work fine on my IPhone 4. But the bluetooth setting on my IPad only "searches" and doesn't find the devices. Any ideas? (Using Latest OS for IPad

I had the same problem for the last 2 weeks and today it just started working with nothing changing. I've also read reports of others having it just start working today. Give it a shot again. I think it was a problem that AT&T sorted out.

HT1414 I have disabled the auto synch on connection of the IPhone5 and now ITunes will not show the iphone as available. How can I find the dialog that will give me control over backup's?

Where -on iTunes - can I find a control that will enable me to synch the Iphone.
The auto synch on attaching is turned off

There is no merge feature for itunes content, never was. Merge applies only to contacts and calendar entries.
The itunes content sync is one way - computer to iphone. The exception is itunes purchases
You can transfer the purchases from the iphone to itunes before you sync. File>Transfer Purchases

How can we tell the client that use process order or production order (proc

Dear guru,
My question on what reason we can tell the client that u have to use process order or production order .
On what scenario we suggest client that use process order or production order

Hi,
Process manufacturing is primarily designed for the chemical, pharmaceutical, food and beverage industries as well as the batch-oriented electronics industry
Discrete manufacturing is u201Cthe production of distinct items such as automobiles, appliances, or computers,u201D whereas process manufacturing covers u201Cproduction that adds value by mixing, separating, forming, and/or performing chemical reactions. It may be done in either batch or continuous mode.u201D
Letu2019s think about what your company manufactures. Does it require mixing chemicals? If so, you may need an ERP system that does things like calculate ingredient quantities.
If your company assembles products from many component parts, youu2019ll require discrete manufacturing functionality
Other approach:
If the finish good cannot return back to its basic components, your manufacturing is Process. For instance, the finish good is a can of soda. It cannot return back to its basic components such as carbonated water, potassium benzoate, aspartame, citric acid, and other ingredients. But if the finish good is car or computer, your manufacturing process is Discrete because it can be disassembled and the parts, to a large extent, can be returned to stock. Therefore Bill of Material (BOM) of discrete manufacturing consists of component parts for assembly while Process manufacturing consist of formulas, recipes and other ingredients
Process manufacturing is scalable. If a formula calls for 1,000 pounds of cake flour, but you only have 500 pounds, you can still bake cakesu2014just not as many. Conversely, in discrete manufacturing, one missing part means waiting for it before the finished assembly unit can start rolling off the production line
The obligatory requisite for process manufacturing is Lot Potency and Shelf Life where as discrete manufacturing values Serial Numbers, ECNu2019s and assembles.
If it is discrete manufacturing ---go for Production order
If it is process manufacturing ---go for process order
thanks and regards
Venkat V

How can I find the original newsfeed addresses in apple RSS mail

I subscribe to a lot of newsfeeds through my apple mail RSS feed. Now I want to find the original addresses to load onto a new device, but the apple mail only shows the title I gave the feed. Where is the actual feed hidden (for example feedburner address)?

Depends on whatr you mean
Deleting from your phone does not delete from anywhere else
HOWEVER deleting from your Photo stream does delete from the Photostream so anyone looking at the PS from any device will no longer see the photo
But if your Mac iPhoto is set to automatically impor tphotos form PS or is you have manually imported photos from PS then onc ethey are imported they are on your Mac and change to PS will not affect them
for more on PS see http://support.apple.com/kb/HT4486?viewlocale=en_US&locale=en_US
LN

I upgraded to OS7 and am having trouble with the reminder app. can not find the dates that use to be at the bottom

tips on using Reminders with OS7

iOS 5: Understanding Location Services
http://support.apple.com/kb/ht4995
 Cheers, Tom

How can I control the music that plays during Apple TV photo slide shows?

I don't want to make my parents listen to Breaking Benjamin music as they watch my photo slide shows on Apple TV. Need something more sedate. But if a B.B. song is in my iTunes music library, it is a candidate for random selection as background music for my slide shows. How do I control what music plays during Apple TV photo slide shows?

What I find is really silly, is the fact the music video's are listed under that artists albums in the Music menu. And when you go into the video 'album' (called 'Unknown' unless you change it) there is an option to shuffle the tracks. Clicking this just results in an error message. So, they should either remove that option if it is a video album, or, better yet, GET IT TO WORK. So silly of them to omit this.
I have submitted feedback.

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

https://discussions.apple.com/thread/6219522

I have PC with Windows XP. I wish to buy a book but it says I need iOS with a specific version of iBooks to open the file. How can I open the product without have a Apple product?

I have PC with Windows XP. I wish to buy a book but it says I need iOS with a specific version of iBooks to open the file. How can I open the product without using an Apple product?

What is the GarageBand version that your friend is using?
If it is GarageBand '11, version 6.0.5, you can buy GarageBand '11 as a boxed retail version with the iLIfe '11 bundle, e.g. from Amazon.
Then you can upgrade GarageBand '11 to 6.0.5, using this upgrader from the Support page:
GarageBand 6.0.5
GarageBand 6.0.5 will work well with your system. But if your friend is using the newest GarageBand 10, this will not help. Then ask your friend to send you audio files for each track, so you can recreate the project from the audio. Or your friend could also use GarageBand '11 for the projects you want to share, that will run well in all newer MacOS X versions, even with GarageBand 10.0 installed on the same system.
-- Leonie

My Ipad and macbookair have been stolen. How can I find the imei code of both devices considering that were all registered on icloud?

My Ipad and macbookair have been stolen. How can I find the imei code of both devices considering that were all registered on icloud?

Unless you have configured iCloud on the MacBook Air and made sure that Find My Mac was turned on, you can't track that. And even if you did do that, that is not a foolproof method of tracking, as it relies on the thief connecting to the internet using the guest account on the machine and not getting in to your account and disabling Find My Mac or wiping the hard drive and installing a clean system.
As for the iPad, similar rules apply there. If it is a wifi-only iPad, it cannot be tracked any other way. If it has 3G, your wireless carrier may be able to help you track it.

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices

I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

How can I find the devices that use my Apple ID

Similar Messages

Maybe you are looking for