How can I find the procedures where I use a table?

How can I find the procedures where I use a table?
I need to look for it in all the users.

select name,owner from dba_dependencies where referenced_name='table_name'
and referenced_owner = 'schema'
and type = 'PROCEDURE'
Aravind

Similar Messages

Hi. My 2013 MacBook Air has suddenly reverted to a previous Excel spreadsheet (from May). I use the same spreadsheet several times a day and hit cmd 's' every 5-10 minutes. How can I find the version I was using yesterday?? Please help. Thanks

Hi. My 2013 MacBook Air has suddenly reverted to a previous Excel spreadsheet (from May). I use the same spreadsheet several times a day and hit cmd 's' every 5-10 minutes. How can I find the version I was using yesterday?? Please help. Thanks

Might be something for you here > Automatically save and recover files - mac excel

How can i find the gain/amplification factor used when acquiring a voltage signal using PCI 6036E

in short, i am interested in find the sensor gain for used in feedback loop simulation

Greetings!
The gain setting defaults to unity gain, but it is selectable to x10 or x100, also. (This is your pre-digitizing gain, of course...after it's in digital form, you can tweak the gain to anything you want in your VI.
Hope this helps.
Eric
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705

How Can I Get The Table_Name Where I Used Dbms_Errlog?

CREATE TABLE ERROR_LOG
ORA_ERR_NUMBER$      NUMBER,
ORA_ERR_MESG$           VARCHAR2(2000 CHAR),
ORA_ERR_ROWID$      UROWID(4000),
ORA_ERR_OPTYP$      VARCHAR2(2 CHAR),
ORA_ERR_TAG$           VARCHAR2(2000 CHAR),
ORA_ERR_TABLE_NAME      VARCHAR2(30),
ORA_ERR_TIME           DATE     DEFAULT SYSDATE,
ORA_ERR_AUTHOR     VARCHAR2(30)     DEFAULT USER
I create a single table for handling errors for all tables.
I just want to Get the table name where I used dbms_errlog.
I want to get table_name where I performed last DML Statemet?
Edited by: Nilesh Hole on May 24, 2010 4:50 AM
Edited by: Nilesh Hole on May 24, 2010 4:57 AM
Edited by: Nilesh Hole on May 26, 2010 3:43 AM

I should have written "you should not" rather than "can not." The advice holds.
The point of using the package in its default mode is that you can fix the problems.
Do it generically and all you learn is that an error occurred.
SQL> select * from ERROR_LOG_SERVERS;
ORA_ERR_NUMBER$ ORA_ERR_MESG$                                      ORA_ERR_ROWID$     OR ORA_ERR_TA
              1 ORA-00001: unique constraint (UWCLASS.PK_SERVERS)                     I
                violatednot much useful information.
But I appreciate you posting the idea so I show on my website why doing this is a bad idea.

In iPhoto, how can I find the videos which are used in iMovie?

My overall goal is to split my iPhoto library, because it's taking up half my HD. (Proud dad, taking too many burst photos and videos of the little guys). I'll put the videos and older-year photos onto an external drive.
Problem is - I can't figure out which iPhoto video clips are in my Huge Home Movie, which has about 5 minutes from every month from 2008-2011.
Is there a way that I can find them? Perhaps I can flag or rate them in iMovie? Perhaps a smart album in iPhoto?
Details:
iMovie '11 (9.0.9)
iPhoto '11 (9.4.3)
Willing to upgrade to newer versions if they solve the problem.

Restore solved it!

How can i find the latest row inserted in a table

i have a table with five columns and there is no primary key and everyday 100's of rows will be inserted to this table ,infact by mistake i have inserted a row and i just want to find out which is the last row i have inserted in to this particular table is there any way to find out this please......

That's not guaranteed to give you the latest row added to the table. Oracle could place new rows anywhere depending on what happened to rows in the table previously, what space is available in the tablespace etc etc:
SQL> create sequence dt_test_rowid_seq start with 1 increment by 1;
Sequence created.
SQL>--generate some test data
SQL> CREATE TABLE dt_test_rowid as
2 select     object_id,
3     object_name,
4     dt_test_rowid_seq.nextval ins_sequence
5 from
6     dba_objects
7 where
8     object_id is not null
9 and
10     rownum <10000;
Table created.
SQL>--here, the latest addition to the table....
SQL> select max(ins_sequence) from dt_test_rowid;
MAX(INS_SEQUENCE)
             9999
SQL>... reflects the highest rowid
SQL> select ins_sequence from dt_test_rowid where rowid=(select max(rowid) from dt_test_rowid);
INS_SEQUENCE
        9999
SQL>--get rid of a load of rows
SQL> delete from dt_test_rowid where mod(object_id,2)=0;
2521 rows deleted.
SQL>--insert a load more
SQL> insert into dt_test_rowid
2 select     object_id,
3     object_name,
4     dt_test_rowid_seq.nextval ins_sequence
5 from
6     dba_objects
7 where
8     object_id is not null
9 and
10     rownum <1000;
999 rows created.
SQL>--and here the latest addition to the table...
SQL> select max(ins_sequence) from dt_test_rowid;
MAX(INS_SEQUENCE)
            10998
SQL>--...is NOT reflected by the highest rowid
SQL> select ins_sequence from dt_test_rowid where rowid=(select max(rowid) from dt_test_rowid);
INS_SEQUENCE
        9999

Where can I find the community where they used to share photoshop actions, presets, patterns ?

I can't exactly tell where it is located but I'm quiet sure I found it here in adobe.com. It's a group of people sharing actions, presets, patterns, all pertaining to photoshop .Has it been removed or transferred somewhere else? Please advise. Thanks !

Does this help?
Adobe Exchange
https://creative.adobe.com/addons

"Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
in both cases I can only see the photos in 'photos' because 'events' shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
3) iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
"Volumes" are the original files aren't them?
Please help. this is so annoying to try and find in the forum, to tricky to explain
I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
THANK YOU
Vicky

The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
This is not clear, especially when you say
I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
So it's a simple question:
Are you these Managed or Referenced Libraries?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

TS3376 How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please

How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please

iPods (except for iPod touch) are not linked to any iTunes "account." They are associated with your iTunes library. The account in iTunes is your Apple ID, and that is used to buy and download content from the iTunes Store. It is not required to use an iPod.
The 1st (and 2nd) gen shuffle can only be used with one iTunes library at a time. When you connect it, iTunes should prompt you to start using it with your iTunes library, and warn that the shuffle's existing content will be erased. Have iTunes erase the shuffle, and it will be associated with your iTunes library going forward. You can then add content to your shuffle.
The need for the previous owner's Apple ID and password should only come up if you are trying to transfer existing content from the shuffle to your iTunes library, AND the previous owner had content purchased from the iTunes Store. Just cancel out of that step, if iTunes asks.

I encrypted iphone backup by mistake ( didnt realize the box was checked). I dont know the password to disable the encryption. How do i fix this? How can i delete the backup , where do i find it?

I encrypted iphone backup by mistake ( didnt realize the box was checked). I dont know the password to disable the encryption. How do i fix this? How can i delete the backup , where do i find it?

In iTunes click on edit then preferences then on the devices tab and the backups are there. Select the one you want to delete then delete it

How can i find the printing program?

hi
i have sap script how can i find the printing program ?
ami

ami bardogo wrote:
hi
what is the different between the commands 'break' and 'break-point'
thanks,
ami
h2 Breakpoints h2
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
·        You do not have to change the program code.
·        You can set them even when the program is locked by another programmer.
·        You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
For further information on special breakpoints, refer to:
Breakpoints at Statements
Breakpoints at Subroutines
Breakpoints at Function Module Calls
Breakpoints at Methods
Breakpoints at System Exceptions
h2 page break h2
WINDOW TYPES
When defining a layout set window, you must select a window type for the window. You can choose between three types:
Constant windows (CONST)
Variable windows (VAR)
Main windows (MAIN)
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
MAIN WINDOW
Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
HOW THE COMPOSER WORKS
The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
Page control in layout sets
Define subsequent page statically
Define subsequent page dynamically
Format a layout set page
PAGE CONTROL IN LAYOUT SETS
SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
DEFINE SUBSEQUENT PAGE STATICALLY
You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
DEFINE SUBSEQUENT PAGE DYNAMICALLY
The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
NEW-PAGE .
NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
FORMAT LAYOUT SET PAGE
The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
LAYOUT SET CONTROL
To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
Several print requests
Start a layout set again
Switch layout sets
Find layout sets
SEVERAL PRINT REQUESTS
Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM.

How can we find the most usage and lowest usage of table in Sql Server by T-SQL

how can we find the most usage and lowest usage of table in Sql Server by T-SQL
The table has time stamp column
StartedOn datetime
EndedOn datetime

The Below query has been used , but the textdata column doesnot include the name of the table ServiceLog.
SELECT
FROM
databasename,
duration
fn_trace_gettable('F:\Program
Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\log_148.trc',
default)
WHERE
DATABASENAME='ZTCFUTURE'
AND TEXTDATA
IS
NOT
NULL
--AND TEXTDATA LIKE 'SERVICE%'
order
by cpu
desc;

How can I find the location of an app on my iPad 2?

How can I find the location of an app on my iPad 2? The app comes up with a search, but that seems to be the only way to find it. I just installed the app today, but I can't figure out where it is. It has a pretty distinctive icon, and I've looked through all of my apps and even in folders (even though I don't know how it would have gotten there). I want to put it in an appropriate folder under the right subject, but I can't find it to do this. I can use the app, since I can find it through a search though. I have a lot of apps, but I looked very carefully and can't find it. Is there a way to ask my iPad to locate it for me? It's a $25 app and one I plan to use regularly, so I want it located in the folder of my choice.This problem makes we wonder if I have other "missing" apps, apps that I could find if I happened to think to search for them, but that don't appear to be on my iPad (even though they actually are).

You were right about the homescreens. I had turned my iPad off for the night with less than three full homescreens of loose apps, those not in folders. When I turned the iPad on this morning to try your suggestions, I had five full pages of loose apps. They just appeared when I restarted, and there was the app I was looking for, easy to find. Last night I was deleting apps I decided I wouldn't use, organizing useful apps into folders, and making sure I had as few pages as needed by making sure the gaps made by the moved/deleted apps were closed. The missing apps didn't show up at that point; I was just left with fewer than 11 pages. The apps only showed up when I restarted this morning. There were almost three extra pages of apps that weren't there last night. I know there must be other things missing, since all of the pages are full. So I tried your suggestion in iTunes. I connected my iPad, found an app in the alphabetical list on the left, and double clicked it. This brought me to the app's homescreen (and its home folder when applicable), the place where it was located. In order to identify which page that was, I had to scroll through the screen shots of the homescreens that was below the homescreen that was showing until I found the homescreen whose number was in white. Then I could count the pages on my iPad until I got to that page. I'll have to delete more apps and organize more into folders to see what else might show up. There are just too many apps available for special education, and I'm in the process of figuring out which are the best for my needs. Thanks so much!

How can i find the installed forms version in 6i...?

Dear all,
How can i find the installed forms version in 6i, the situation is we have given a solution which will work in only forms6i latest version, before implementing the same we need to check whether the forms latest version has been installed or not
Is there any way to find out without opening the forms builder..?
Even if we un install the forms from a machine, the forms60_path variable will remain in regedit, so we cannot go based on that and aslo i dont know whether regedit will have the version details and all.
It would be greatly appreciated if any one can give a solution.
Thanks in Advance.
Thangaraj.

you query the registry, the registry has the version number saved, but I cannot remember exactly where and I don't have 6i Installed on my machine.
You just open the Forms Builder and click on Help/About.
But Jan's method is the best.

Where can I find the file where the static mapping allocations of the DHCP server are stored?

In our company we are using DHCP to assign static ip addresses to our clients.
Now we are forced to change the ip address range. To prevent changing each allocation
of mac-address to ip-address manually with the admin tool i would like to change the allocation
in the file where the allocations are saved. The reason ist that i just have to use copy & paste for all
the allocations.
So how is the file named and where can I find the file where
the static mapping allocations of the DHCP server are stored? Is it just an ASCII file?
Must i note anything when i change the file manually?

From man bootpd:
BOOTP/DHCP STATIC BINDINGS
     Static IP address to ethernet address bindings are stored in the /etc/bootptab file and in Open Directory. Bindings specified in the /etc/bootptab file take precedence over those in Open Directory.
     See bootptab(5) for more information about the /etc/bootptab file.
     For Open Directory, bootpd looks at the /Computers records for the following properties:
/etc/bootptab is a standard text file, while the records in Open Directory can be manipulated either through the command line, or via Workgroup Manager.

How can I find the procedures where I use a table?

Similar Messages

Maybe you are looking for