How can I find the Search pane on iOS 7.0.4?

It USED TO WORK by swiping down from the center. Now swiping down from the center with the newest CRAP iOS 7.0.4, all that happens is the notifications tab pulls down.
I can see all the options for Spotlight Search in the General Setup, and have all of the search options enabled, but the old way (2 weeks ago) of getting the search pane DOESN'T WORK ANYMORE.
Anyone have a clue where it went, or how to get it back, or enable it, or anything? SIRI is clueless too. I say "Open Spotlight Search". She says "You don't seem to have an app named Spotlight Search"
I can tell SIRI to open one of my 150+ apps WHEN ONLINE, but if I'm flying or out of wi-fi, and want to search my iPad, I need the spotlight search pane!!!

Gee, tonefox, did you REALLY have to log on and take the time to throw stones and call names? A tantrum? Really? Tantrum??
How about from now on you just submit useful information? I admitted to having problems with it, and I was frustrated because it didn't work the way it used to. Maybe I just got lucky before, every time I wanted the search pane.
I asked Siri for "Spotlight Search" because that's what Apple CALLS IT in the general setup. So, genius, since you're SO much more highly informed than me, what else should I have asked for? Believe me, I tried dozens of different word combinations to get Siri to give me the search pane.
Again, if you don't have something nice or helpful to say, please don't say anything. This isn't a social network place - it's a support forum. You gave no support.

Similar Messages

Can't find the search in iTunes iOS 7.0.3

I have a iphone 4S and i just updated to ios 7.0.3. Went into iTunes and tried to search. The interface canges to the search page but there is no input box. Am I missing something. It was there in 7.0.2

jackisstuck wrote:
Went into iTunes ...
I don't know what that means. You may mean you went into the iTunes Store, or you may mean you went into the Music app. There is no longer any item called "iTunes" on an iPhone.
If you went into the iTunes Store, there is a "search" tab in the lower right.
If you went into Music, scroll from top to bottom on the window you are viewing, and you should see a search area there.

HT5275 How do I find the password pane in safari? It is mentioned as a new feature, but I can't find it.

How can I find the password pane in safari?
I have looked through all of the obvious menus.
Would like to find one of my stored website passwords.
Thank you.

In Safari: Preferences>Passwords

How can I find the location of an app on my iPad 2?

How can I find the location of an app on my iPad 2? The app comes up with a search, but that seems to be the only way to find it. I just installed the app today, but I can't figure out where it is. It has a pretty distinctive icon, and I've looked through all of my apps and even in folders (even though I don't know how it would have gotten there). I want to put it in an appropriate folder under the right subject, but I can't find it to do this. I can use the app, since I can find it through a search though. I have a lot of apps, but I looked very carefully and can't find it. Is there a way to ask my iPad to locate it for me? It's a $25 app and one I plan to use regularly, so I want it located in the folder of my choice.This problem makes we wonder if I have other "missing" apps, apps that I could find if I happened to think to search for them, but that don't appear to be on my iPad (even though they actually are).

You were right about the homescreens. I had turned my iPad off for the night with less than three full homescreens of loose apps, those not in folders. When I turned the iPad on this morning to try your suggestions, I had five full pages of loose apps. They just appeared when I restarted, and there was the app I was looking for, easy to find. Last night I was deleting apps I decided I wouldn't use, organizing useful apps into folders, and making sure I had as few pages as needed by making sure the gaps made by the moved/deleted apps were closed. The missing apps didn't show up at that point; I was just left with fewer than 11 pages. The apps only showed up when I restarted this morning. There were almost three extra pages of apps that weren't there last night. I know there must be other things missing, since all of the pages are full. So I tried your suggestion in iTunes. I connected my iPad, found an app in the alphabetical list on the left, and double clicked it. This brought me to the app's homescreen (and its home folder when applicable), the place where it was located. In order to identify which page that was, I had to scroll through the screen shots of the homescreens that was below the homescreen that was showing until I found the homescreen whose number was in white. Then I could count the pages on my iPad until I got to that page. I'll have to delete more apps and organize more into folders to see what else might show up. There are just too many apps available for special education, and I'm in the process of figuring out which are the best for my needs. Thanks so much!

How can i find the original picture in the correct event folder from an album folder picture?

how can i find the original picture in the correct event folder from an album folder picture? I can find the link to the original event folder, but is there a way to get right to the picture without having to search visually the event folder?

Depends on whatr you mean
Deleting from your phone does not delete from anywhere else
HOWEVER deleting from your Photo stream does delete from the Photostream so anyone looking at the PS from any device will no longer see the photo
But if your Mac iPhoto is set to automatically impor tphotos form PS or is you have manually imported photos from PS then onc ethey are imported they are on your Mac and change to PS will not affect them
for more on PS see http://support.apple.com/kb/HT4486?viewlocale=en_US&locale=en_US
LN

How can i find the value category code in CJVC

Hi Gurus
how can i find the value category code in CJVC and which tables its stored.can any one tell me.please please

Read TPIK3 in an internal table, then search COEP-KSTAR in this table, with KSTAR between TPIK3-KSTRF and TPIK3-KSTRT, and other keys like Controlling Area and application/component (eg "PS" in project-system as in CJVC or "PM" in Maintenance as in IW33, multiple application use this table). You can also use a FM like PS_FIND_ACPOS_FOR_KSTAR.
Regards,
Raymond

HT5035 i have a itunes gift card how can i find the balance on my card?

i have a itunes gift card how can i find the balance on my card?

If the value of the card isn't printed on it and you don't have the purchase receipt, the only way to determine the value of the card is by redeeming it. If you have already redeemed it, then the card is now valueless. The credit balance is carried in your iTunes Store account and will be displayed in iTunes next to your Apple ID when you're signed into the iTunes Store, or on an iOS device at the bottom of the screen in the App Store or iTunes Store apps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base before you post a question.
Regards.

How can i find the file to which Session Manager has saved my session ?

How can I find the file to which Session Manager has saved my session ?
== This happened ==
Every time Firefox opened
== User Agent ==
Opera/9.80 (Windows NT 6.0; U; en) Presto/2.5.24 Version/10.53

From
http://support.apple.com/en-us/HT4946
Where your backups are stored
The folder where your backup data is stored depends on your computer's operating system. Make sure the backup folder is included in your data-backup routine. iTunes places the backup files in these places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
    Windows Vista, Windows 7, and Windows 8: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    To quickly access the AppData folder, click Start. In the search bar, type %appdata%, then press Return.
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    To quickly access the Application Data folder, click Start, then choose Run. In the search bar, type %appdata%, then click OK.
See here for how to backup
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support

How can I find the reason for frequent system crashes?

Hi all,
since a couple if weeks my iMac (late 2009) has a system crash at least once per day; I don't know the reason or what software causes that. How can I find the source of this crashes?
Thanks and regards
Chris

Thanks for your answer.
Here the result:
EtreCheck version: 1.9.15 (52)
Report generated 27. September 2014 11:26:51 GMT+8
Hardware Information: ?
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information: ?
ATI Radeon HD 4670 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 3:9:21
Disk Information: ?
ST31000528AS disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 999,35 GB (636,04 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ?
StoreJet Transcend StoreJet Transcend 2 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted>: 209,7 MB
Transcend (disk1s2) /Volumes/Transcend: 2 TB (1,53 TB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple, Inc. Keyboard Hub
Apple Inc. iPhone
Apple Inc. Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.3) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
[loaded] foo.tap (1.0) Support
[loaded] foo.tun (1.0) Support
Startup Items: ?
KP_IPFW: Path: /System/Library/StartupItems/KP_IPFW
Sudochmod: Path: /Library/StartupItems/Sudochmod
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.machangout.glims.loader.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] org.tcpdump.chmod_bpf.plist Support
[loaded] PACESupport.plist Support
[running] vyprvpnservice.plist Support
Launch Agents: ?
[loaded] com.avast.userinit.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.hp.messagecenter.launcher.plist Support
[running] com.machangout.glims.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.akamai.single-user-client.plist Support
[loaded] com.avast.home.userinit.plist Support
[running] com.google.Chrome.framework.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[not loaded] Verbindungsassistent
User Login Items: ?
Show Desktop
Skype
Air Media Server
TuneupMyMac
VyprVPN
Internet Plug-ins: ?
NPClientBinding: Version: 1.0.0.5 - SDK 10.6
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
NPCleanHistory: Version: 1.0 - SDK 10.6
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: Unknown
NPSafeInput: Version: 1.0 - SDK 10.6
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
NPSafeSubmit: Version: 1.0 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.0.2.6 Beta - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Safari Extensions: ?
AdBlock
wrc (Disabled)
Download Shuttle
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
Picasa: Version: 1.0 Support
WebEx64: Version: 1.0 - SDK 10.5 Support
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Java Support
MacFUSE (Tuxera) Support
Time Machine: ?
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 338.35 GB
Destinations:
Transcend [Local] (Last used)
Total size: 2 TB
Total number of backups: 23
Oldest backup: 2014-09-12 08:28:44 +0000
Last backup: 2014-09-27 03:10:24 +0000
Size of backup disk: Adequate
Backup size 2 TB > (Disk used 338.35 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      2% WindowServer
      0% Microsoft Word
      0% VyprVPN
      0% Skype
      0% hidd
Top Processes by Memory: ?
377 MB iTunes
369 MB Safari
254 MB mds_stores
180 MB com.apple.IconServicesAgent
131 MB com.avast.daemon
Virtual Memory Information: ?
2.37 GB Free RAM
3.25 GB Active RAM
1.60 GB Inactive RAM
793 MB Wired RAM
1.52 GB Page-ins
0 B Page-outs

How can i find the printing program?

hi
i have sap script how can i find the printing program ?
ami

ami bardogo wrote:
hi
what is the different between the commands 'break' and 'break-point'
thanks,
ami
h2 Breakpoints h2
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
·        You do not have to change the program code.
·        You can set them even when the program is locked by another programmer.
·        You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
For further information on special breakpoints, refer to:
Breakpoints at Statements
Breakpoints at Subroutines
Breakpoints at Function Module Calls
Breakpoints at Methods
Breakpoints at System Exceptions
h2 page break h2
WINDOW TYPES
When defining a layout set window, you must select a window type for the window. You can choose between three types:
Constant windows (CONST)
Variable windows (VAR)
Main windows (MAIN)
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
MAIN WINDOW
Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
HOW THE COMPOSER WORKS
The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
Page control in layout sets
Define subsequent page statically
Define subsequent page dynamically
Format a layout set page
PAGE CONTROL IN LAYOUT SETS
SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
DEFINE SUBSEQUENT PAGE STATICALLY
You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
DEFINE SUBSEQUENT PAGE DYNAMICALLY
The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
NEW-PAGE .
NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
FORMAT LAYOUT SET PAGE
The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
LAYOUT SET CONTROL
To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
Several print requests
Start a layout set again
Switch layout sets
Find layout sets
SEVERAL PRINT REQUESTS
Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM.

How can I find the dns names ?

those what are made in the control panel...

how can I find the dns names ?That is OS specific thus you must either use Runtime.exec() or use JNI to get to the names.
If you search this forum you will find more specific suggestions on how to get them.

How can we find the most usage and lowest usage of table in Sql Server by T-SQL

how can we find the most usage and lowest usage of table in Sql Server by T-SQL
The table has time stamp column
StartedOn datetime
EndedOn datetime

The Below query has been used , but the textdata column doesnot include the name of the table ServiceLog.
SELECT
FROM
databasename,
duration
fn_trace_gettable('F:\Program
Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\log_148.trc',
default)
WHERE
DATABASENAME='ZTCFUTURE'
AND TEXTDATA
IS
NOT
NULL
--AND TEXTDATA LIKE 'SERVICE%'
order
by cpu
desc;

I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?

I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?

Its possible the App is not available in the Canadian store if the link doesn't work for you.
https://itunes.apple.com/us/app/xfinity-connect/id320788270?mt=8

How can I find the URL for an iCal calendar in iCloud so I can make a link to it on a web page.

I have a single iCal calendar that I want people to access through my webpage. How can I find the URL so that they can view the calendar without having to subscribe to it. I converted to iCloud from .Mac and I can see that changes to this calendar are not showing up.

Mmmh.. i see... I don't know wether it is possible for people just check calendars without subscribing to them... I have been sharing some calendars in my website (maybe you can have a look at it in order to check wether it could be a possible solution for you)
http://web.me.com/andreabruschi/englishplanet/English_Courses.html
Cheers
Andrea

In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

Hello, all.
In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

Click the search magnifying glass and uncheck "Search entire library".
Type in the name of the track.
Click the album of interest to show tracks.
Select the track.
Press the X in the search box to clear the search.
Double click the track you want to start playing first.
tt2

How can I find the Search pane on iOS 7.0.4?

Similar Messages

Maybe you are looking for