How can I find the source of report in the executable method= "Spawned" ?

Dear all:
how can I find the source of report in the executable method=>"Spawned" ?
Regards,

Hi,
Please see this thread.
To View Spawned Concurrent Program Source Code
To View Spawned Concurrent Program Source Code
Regards,
Hussein

Similar Messages

How can I find out what is running in the background and running my batterie down

How can I find out what is running in the background

Hi simpbarby,
Welcome to the Support Communities!
The links below will help you understand what apps are running on your iPhone. You can quit the ones that you aren't using.
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
This link will provides tips to conserving battery life:
Apple - Batteries - iPhone
http://www.apple.com/batteries/iphone.html
Optimize Your Settings
Depending on how they are set, a few features may decrease your iPhone battery life. The tips below apply to an iPhone running iOS 7.0 or later.
Enable Wi-Fi: Having Wi-Fi enabled helps consume less power when doing activities that access data. Go to Settings > Wi-Fi and log in to a Wi-Fi network.
Adjust brightness: Dim the screen or turn on Auto-Brightness to extend battery life. Turning on Auto-Brightness allows the screen to adjust based on lighting conditions.
Fetch new data less frequently: The more frequently email or other data is fetched, the quicker your battery may drain. To fetch data manually: Go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually.
Turn off push notifications: Apps with Push Notification alert you of new data, which may impact battery life. To disable, go to Settings > Notifications, choose the app you want to disable, and do the following:
Change Alert Style to None.
Turn Badge App Icon off.
Turn Sounds off.
Note: New data will be received when you open the app.
Minimize use of location services: Apps that actively use location services, such as Maps, may reduce battery life. You can see which applications have recently used location services by going to Settings > Privacy > Location Services.
Use Airplane Mode in low- or no-coverage areas: Your iPhone always tries to maintain a connection with the cellular network, which may use more power in low- or no-coverage areas. Turn on Airplane Mode to increase battery life in these situations.
Viewing Usage StatisticsKnowing and understanding your iPhone usage can help you better manage your battery life. To view your iPhone usage statistics, go to Settings > General > Usage. Under “Time since last full charge”:
Usage: Amount of time iPhone has been awake and in use since the last full charge. iPhone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
Standby: Amount of time iPhone has been powered on since its last full charge, including the time the phone has been asleep.
I hope this information helps ....
Have a great day!
- Judy

I lost my macbook, how can i find it back? i have the serial number.

i lost my macbook, how can i find it back? i have the serial number.

you can not find it unless "find my mac" was enabled and the mac is online. Also, read this: http://support.apple.com/kb/ht2526

How can i save my Test Stand report as the serial Number?

Hi, I'm using TestStand 3.0 and LabVIEW 7.0 I want to know how i can save my TestStand generated report as the UUT serial number. Thanks

Hi arj,
Within the Report Option in the Report File Pathname Tab is a control 'New UUT Report File for Each UUT'. Enabling this will include the Serial number in the Report Filename. Unfortunately its formated into the filename as '[serial number]'.
This is done in a step in the Process Model - Test UUTs or Single Pass. This step is called 'Determine Report File Path' which is a dll call to a function in modelsupport2.dll. This returns the full pathname to the report and stores in Locals.ReportFilePath.
So you have the option either modify the Locals.ReportFilePath or modify the Function in modelsupport2.dll and rebuild the DLL.
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer

How can I find and disable Page Down in the Keyboard Shortcuts menu?

I often accidentally hit Page Down because it's right beside my arrow keys. It seems to switch to the next symbol in the library which is something I never under any circumstances would want to do. How do I disable this incredibly annoying keyboard shortcut? I can't find it anywhere in the unsearchable rat's nest that is the Keyboard Shortcut menu.

Aha, thank you for drawing my attention to the export html button, it does make it possible to search those keyboard shortcuts.
In my case, View -> Go to -> Next was set to nothing. More oddly, the words "Page Down" don't appear anywhere at all in the generated file, and when I set another random command (Zoom In) to use Page Down it didn't warn of a conflict. Hitting page down zoomed in instead of switching me to another symbol, and when I cleared the shortcut from zoom in it went back to swapping between symbols. I guess I'll have to set something benign to use the page down key.
Bizarre. I guess this must be a bug in CS6?

How can I find out what's running in the background?

Hi All -
This has been happening for quite some time and I just can't seem to figure it out.
It seems as though my machine is constantly processing something. I can hear it "chugging away". Even when no applications are running. So far I have tried the following:
Deleting all applications I no longer use (including all of their hidden files)
Turned off applications such as Google Drive and Drop Box (in case it was the continual syncing)
Checked the Activity Monitor and Installed something called iStat Pro - neither of which I understand how to read.
Can anyone give me any more suggestions? My next step would be to reformat, but we all know how cumbersome and time-consuming that can be! Perhaps I just need more memory or storage.
Thanks so much in advance
S7

Did you uninstall CleanMyMac according to the developer's instructions: How to Uninstall CleanMyMac Classic ... - MacPaw
To verify that you've eliminated all of the files associated with CYM download and run Find Any File to search for any files with "the application's' name" and the "developer's name" in the file name. For example for CleanMyMac you'd do two searches:
1 - Name contains "cleanmymac"
2 - Name contains "macpaw"
Any files that are found can be dragged from the search results window to the Desktop for deletion.
FAF can search areas that Spotlight can't like invisible folders, system folders and packages.
Download and run Etrecheck. Copy and paste the results into your reply. It's a diagnostic tool that was developed by one of the most respected users here in the ASC to help identify the more obvious culprits.

How can one counter be sources (or gated) with the output of the other?

I'm trying to use the counters to generate a square pulse train that contains a certain number of pulses (on 6036E). For that I need to gate counter0 with the output of counter1. The manual seems to indicate that I need to use
GPCTR_Change_Parameter (deviceNumber, ND_COUNTER_0, ND_GATE, ND_COUNTER_1) ,
however it makes no difference to the output; I see no gating. What am I doing wrong? Am I missing something?
I would also like to source counter1 with the output of counter0. There's a similar function call to choose the source signal, but so far I've been unable to source a counter with anything but the internal timer. I guess the reason for it might be the same as the gating problem.
Petro

Hi Petro-
This example shows how to output a finite gated pulse train on an E Series board. It mentions that it is a CVI example, but the main .c file does not include any CVI-specific functionality so it should work if you're using ANSI C.
Equivalent functionality is available in NI-DAQmx for your board and is considerably more intuitive. An example of pause-triggered pulse train generation is available in the "C:\Program Files\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Counter\Generate Pulse\Dig Pulse Train Cont-Pause Trig" directory of your local drive. One method to generate the "pause trigger" pulse train is shown in "C:\Program Files\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Counter\Generate Pulse\Dig Pulse Train-Cont" .
I'm not sure what you mean when you say "I would also like to source counter1 with the output of counter0." What do you need to perform this operation for? The reliance of counter 1 on counter 0 and counter 0 on counter 1 creates a type of circular reference that is almost guaranteed to be problematic.
Hopefully this helps-
Tom W
National Instruments

How can I find out more about books in the iBooks store?

I've got iBooks for my iPod Touch and it works well. However when I search for stuff in the iBook Store, there is very little information apart from the title and author of a work. For example if it's a translation of a well-known book (think Tolstoy, Homer, Dumas), then probably there will be several different translations available, but iBooks store doesn't tell me which one it is offering; indeed sometimes more than one version is offered with no info about the difference between the versions. Is there any way of searching for more info on books in the store? After all, someone must have compiled the list.

I always do the tapping, and this never tells me the kind of thing I was querying. However I have to admit the samples (which I haven't often used) do often seem to do the trick - I just sampled a few books, and since they all had title pages included in the sample, I got what I wanted from there. What they reveal about classics like Anna Karenina or The Odyssey is that the translations are often very old (frequently 19th Century) and therefore in the public domain. Nice because free, but I would not normally want to go back that far, so I guess iBooks is not the place to look for modern editions of classics?
Anyway to be fair you have answered my question - but I would love iBooks to give access to better review material (not just user reviews that may or may not exist, but something more like Amazon's system): and really I would like them to have a lot more books from different periods (again like Amazon, or a really good bookshop). But I guess I'm not exactly iBooks' target audience.

How can I find out my data usage for the past 3 months?

Greetings all, I have been a long time Verizon customer, and as such I, along with my husband, was grandfathered into the unlimited data plan. When I last spoke to a representative, they informed me that the only way we were going to be able to keep our unlimited data was by paying the full retail price ($600+) to get a new phone. So we were considering upgrading and changing to one of the newer data plans so we could still get the discounted price on the new phone, but I would like to make sure I choose one with enough data, without paying for a bunch of data that I don't use, however MyVerizon only shows me the amount I have used since the start of the billing cycle. Is there a way to find out the data usage for both my husband and myself for the last 3 months so I can choose the right option?
Thanks in advance for your help!

Hello sweetpea1221! How exciting that you're considering upgrading with us. mrhelper is helpful, indeed. You can view your data usage for each line under the View Bill option via your My Verizon account. You can also view your 3 month average data usage with our Account Analysis feature. Here's a link that will be helpful in doing so http://bit.ly/vnLjqO. I'm confident that we have a great plan to match your data needs. Please let us know if you have further questions.
TanishaS1_VZW
Follow us on Twitter @VZWSupport

How can i find an excel file deleted from the server

In our office we all have access to the main server. Recently a document that we need was deleted from the server. It's not in the trash. Can and how would we be able to find and recover this deleted document? Specifically I am looking for an excel document, and I already checked the recent docs on excel.
thanks!

Have the admin for the server restore the file from the backup

How can i find my deleted text messages on the iphone4

My ex boyfriend figured out a way to get all my deleted messages from the last month and i want to know how i can block him from doing this again?

Also, if the messages used Apple's iMessage, then any other device logged in using the same Apple ID and password would still have those messages regardless of whether you deleted them on your iPhone.

How can i find a number of valor in the flowing file i mean tu count the valors

i want to find how much valors are in tjis file i mean from the NCOUNT = 8062 to the end
Attachments:
exampl1.txt ‏2 KB

This works for your example I believe. If other files have something other than NCOUNT = 8062, then you'll have to do make some modifications to accomodate that but you should have something here to get you started.
Attachments:
Read_File.vi ‏18 KB

How can I find all my photos instead of the just the last six months?

I need help finding all my photos, instead of just the last six months.

Which PSE version ?
The last six month option is generally one of the choices for 'smart albums', now called 'saved searches'.

HT4436 how can I find previously backed up info on the icloud

I accidentally erased a phone number on my iPhone and am trying to recover it - anybody have any ideas out there??? Please :)

If you erased a phone number from the Contacts that connect to icloud, then you won't be able to get that back from an icloud backup - Contacts, as well as the other Apple data like Calendars are not part of a backup, since they are already in the Contacts database on icloud. If the contacts are/were also on your computer, then you can get back the contacts file from a restore of the backup of the computer you keep. On a mac, look in Time Machine to do a restore.

How can i find a library that is on the same network as me so I can share?

There are multiple people on the network that share iTunes libraries, but the certain one I'm looking for is not showing up. Is there anyway for me to search for this specific library? I am using the most recent version of iTunes.

There is no way to search for a shared library. If the computer on which the library is being shared is on the same subnet as your computer, it should appear automatically. If it's not appearing, perhaps the library isn't really being shared or the computer is on a different subnet in which case you cannot connect to it; iTunes Sharing does not work across subnets.
Regards.

How can I find the source of report in the executable method= "Spawned" ?

Similar Messages

Maybe you are looking for