How can I find the text only in the custom text frame?

Well guys, I have a problem.
I have such code:
app.findTextPreferences.findWhat = "text";
text = app.activeDocument.findText();
position = text[0].insertionPoints[0].index
in the variable "position" I get  global(not depending in which frame the text is) position(number of chars) of the found text, but I want to get the number of the frame where is text was found! Or how can I find only in the custome frame?
Please, help me

Assuming that you have some way of identifying that text frame, then it is just a matter of doing the search only against that frame. For example:
myFrame = app.documents[0].pages[3].textFrames[5];
app.findTextPreferences.findWhat = "text";
text = myFrame.findText();
position = text[0].insertionPoints[0].index
However, unless myFrame is the first in a story, the index will not be relative to the start of myFrame. To get that, you need:
framePos=myFrame.characters[0].index;
textOffsetInFrame =position - framePos;
Dave

Similar Messages

  • I had 2 games of clash of clans on 1 game centre.  Now I can only see one?  How can I find the other one?

    My kids had 2 games of clash of clans on 1 game centre.  Now I can only see one?  How can I find the other one?
    My daughter set up a game centre on her ipad.  My son, on his ipad used the same game centre log in.  He then set up his own game of clash of clans.  After my son set up his Clash of Clans, my daugher set up her own Clash of Clans using the same game centre log in on her ipad.  Both were using the Clash of Clans successfully on their own ipads using the same game centre log in. 
    One day my son signed into someone elses Clash of Clans, since then he is unable to go back to his Clash of Clans and can only see his sisters.
    Please let me know if this can be resolved.
    We wish to delete my daughters Clash of Clans - as she does not use it at all.  We would like to regain access to my sons. 
    My son can visit his Clash of Clans - his clan name is 'The Big Boys'  He has a shield that is blue with a yellow lightning from top right to bottom left.  His name is Fat Poo (I know ridiculous).
    If you can help us or advise us what to do we would make my son very happy
    thanks

    Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
    I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
    My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
    I haven't tried installing the latest beta. Maybe that would fix the problem.
    Toddo

  • How can i find the printing program?

    hi
    i have sap script how can i find the printing program ?
    ami

    ami bardogo wrote:
    hi
    what is the different between the commands 'break' and 'break-point'
    thanks,
    ami
      h2 Breakpoints  h2
    Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
    There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
    Breakpoint Variants
    The Debugger contains different breakpoint variants:
    Static
    A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
    Directly set
    dynamic breakpoints
    Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
    Breakpoints
    at statements
    The Debugger stops the program immediately before the specified statement is executed.
    Breakpoints
    at subroutines
    The Debugger stops the program immediately before the specified subroutine is called.
    Breakpoints at function modules
    The Debugger stops the program immediately before the specified function module is called.
    Breakpoints at methods
    The Debugger stops the program immediately before the specified method is called.
    Breakpoints at exceptions and system exceptions
    The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
    Static Breakpoints
    Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
    In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
    Dynamic Breakpoints
    Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
    Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
    ·        You do not have to change the program code.
    ·        You can set them even when the program is locked by another programmer.
    ·        You can define a counter that only activates the breakpoint after it has been reached.
    Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
    In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
    Lifetime and Transfer of Breakpoints
    A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
    If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
    If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging  under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
    For further information on special breakpoints, refer to:
    Breakpoints at Statements
    Breakpoints at Subroutines
    Breakpoints at Function Module Calls
    Breakpoints at Methods
    Breakpoints at System Exceptions
    h2 page  break h2
    WINDOW TYPES
    When defining a layout set window, you must select a window type for the window. You can choose between three types:
    • Constant windows (CONST)
    • Variable windows (VAR)
    • Main windows (MAIN)
    CONSTANT WINDOW
    A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
    Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
    VARIABLE WINDOW
    The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
    As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
    MAIN WINDOW
    Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
    • It controls the page break.
    • It contains the text body that may cover several pages.
    • It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
    As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
    If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
    HOW THE COMPOSER WORKS
    The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
    Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
    Page control in layout sets
    Define subsequent page statically
    Define subsequent page dynamically
    Format a layout set page
    PAGE CONTROL IN LAYOUT SETS
    SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
    If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
    DEFINE SUBSEQUENT PAGE STATICALLY
    You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
    DEFINE SUBSEQUENT PAGE DYNAMICALLY
    The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
    If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
    NEW-PAGE .
    NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
    FORMAT LAYOUT SET PAGE
    The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
    For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
    As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
    A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
    To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
    LAYOUT SET CONTROL
    To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
    To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
    You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
    Several print requests
    Start a layout set again
    Switch layout sets
    Find layout sets
    SEVERAL PRINT REQUESTS
    Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
    CALL FUNCTION 'OPEN_FORM'
    CALL FUNCTION 'CLOSE_FORM'
    CALL FUNCTION 'OPEN_FORM'
    CALL FUNCTION 'CLOSE_FORM'
    You cannot combine ABAP/4 list output and SAPscript output in one print request.
    START A LAYOUT SET AGAIN
    Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
    To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
    CALL FUNCTION 'OPEN_FORM'
    CALL FUNCTION 'START_FORM'
    CALL FUNCTION 'END_FORM'
    CALL FUNCTION 'START_FORM'
    CALL FUNCTION 'END_FORM'
    CALL FUNCTION CLOSE_FORM
    If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM.

  • How can I find the location of an app on my iPad 2?

    How can I find the location of an app on my iPad 2? The app comes up with a search, but that seems to be the only way to find it. I just installed the app today, but I can't figure out where it is. It has a pretty distinctive icon, and I've looked through all of my apps and even in folders (even though I don't know how it would have gotten there). I want to put it in an appropriate folder under the right subject, but I can't find it to do this. I can use the app, since I can find it through a search though. I have a lot of apps, but I looked very carefully and can't find it. Is there a way to ask my iPad to locate it for me? It's a $25 app and one I plan to use regularly, so I want it located in the folder of my choice.This problem makes we wonder if I have other "missing" apps, apps that I could  find if I happened to think to search for them, but that don't appear to be on my iPad (even though they actually  are).

    You were right about the homescreens. I had turned my iPad off for the night with less than three full homescreens of loose apps, those not in folders. When I turned the iPad on this morning to try your suggestions, I had five full pages of loose apps. They just appeared when I restarted, and there was the app I was looking for, easy to find. Last night I was deleting apps I decided I wouldn't use, organizing useful apps into folders, and making sure I had as few pages as needed by making sure the gaps made by the moved/deleted apps were closed. The missing apps didn't show up at that point; I was just left with fewer than 11 pages. The apps only showed up when I restarted this morning. There were almost three extra pages of apps that weren't there last night. I know there must be other things missing, since all of the pages are full. So I tried your suggestion in iTunes. I connected my iPad, found an app in the alphabetical list on the left, and double clicked it. This brought me to the app's homescreen (and its home folder when applicable), the place where it was located. In order to identify which page that was, I had to scroll through the screen shots of the homescreens that was below the homescreen that was showing until I found the homescreen whose number was in white. Then I could count the pages on my iPad until I got to that page. I'll have to delete more apps and organize more into folders to see what else might show up. There are just too many apps available for special education, and I'm in the process of figuring out which are the best for my needs. Thanks so much!

  • How can I find the serial number for my stolen iPad that's associated with my apple ID ?

    How can I find the serial number for my stolen iPad that's associated with my apple ID ?

    If you registered it with Apple check your registered items at Your Support Profile for Registered Purchases. Also, see iOS- How to find the serial number, IMEI, MEID, CDN, and ICCID number.
    What To Do If Your iDevice Is Lost Or Stolen
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • How can i find the installed forms version in 6i...?

    Dear all,
    How can i find the installed forms version in 6i, the situation is we have given a solution which will work in only forms6i latest version, before implementing the same we need to check whether the forms latest version has been installed or not
    Is there any way to find out without opening the forms builder..?
    Even if we un install the forms from a machine, the forms60_path variable will remain in regedit, so we cannot go based on that and aslo i dont know whether regedit will have the version details and all.
    It would be greatly appreciated if any one can give a solution.
    Thanks in Advance.
    Thangaraj.

    you query the registry, the registry has the version number saved, but I cannot remember exactly where and I don't have 6i Installed on my machine.
    You just open the Forms Builder and click on Help/About.
    But Jan's method is the best.

  • How can I find the time a site was accessed in Safari's history?

    I know that Safari's "History" list is in reverse order, that is, most recently visited sites at the top of the list.  How can I find the time a particular site was visited?

    As of Safari 5.1.7 there does not appear to be a way to view the time in the browser, but it is still possbile to find from the raw history file. Open /Users/[yourusername]/library/Safari/History.plist in a text editor. Depending on how your text editor reads the file, you may see a lot of garbled text, but you should still be able to find the URL that you want the time for. After the URL you may see the page's title, but should also see a left square bracket followed by numbers.
    Example:
    _?http://www.apple.com/_Apple[377832904.6o
    The integer is an Apple timestamp (number of seconds since 00:00:00 UTC on 1 January 2001). Find a timestamp calculator online to get the actual time for your timestamp. In the example above, Apple was visited on Dec 21 2012 at 17:35:04 PST.
    Cheers.

  • How can I find the non-truncated serial number of CS4 masters collection installed on my Mac?

    I got CS4 Masters Collection about 3 years ago when I was still using a PowerPC G5 Mac. Since then, I've upgraded my setup with Intel machines. I'd like to use Adobe Premiere Pro on my MacBook Pro, as I cannot run it on my G5. I found a download link on Adobe's servers for the old Adobe Premiere CS4 trial, and I downloaded it. Since it isn't installed on the G5, I should be able to use it on my intel machine, right? So I went into Help/System Info on one of the other CS4 apps installed on my G5, and found the serial code, but it was shortened to 20 characters, when the registration requires 24. How can I find the last 4 characters so I can activate Premiere? I found a guide, but it only works for PC's. Please help, I'm tired of using FCPX.

    No, that is not rue, Adobe limits the supply of their software explicitly to Adobe themselfs and to their contract distributers. And the other problem is that the serial is stcked on the package of the DVDs. So, if someone passes his original DVDs to someone else he gives him also the serial. He has no possibility to hinder someone the use of these SN. So he has given away the proof of his licence.

  • If I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...

    if I've lost or had my iPod nano 3rd gen stolen, how can i find the serial numbers? Nothing in iTunes but i am sure i linked them before...
    They are not listed as devices on the itunes store account...

    Hi BradSLane,
    Thanks for using Apple Support Communities.  This article has one method to find your serial number:
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    If you have lost or found an Apple product, please contact your local law enforcement agency to report it. Although Apple does not have a process to track or flag lost or stolen product, you can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
    Go to My Support Profile*.
    Sign in with your Apple ID.
    View your purchases in "My Products".
    * Currently available only in certain languages.
    Note: If you need help remembering your Apple ID(s), go here.
    Take care,
    - Ari

  • How can I find the position of a robotic arm with a cFP-CTR card?

    Hello,
    I use a CTR-500 to measure the pulses of 3 encoders.
    The encoders are related to the 3 axis (x,y,z), to which a robotic arm is moving.
    Each encoder has 2 channels (A,B) which go to each pair of Count Inputs of the CTR card.
    When the robotic arm is moving on one axis, the corresponding pair of Count Inputs is increasing, but there is a phase between the one Count Input and the second one. What is more, the Count Inputs do not decrease when the robotic arm is moving to the other direction, but they still increase.
    So, I cannot find easily the position of the robotic arm.
    What I have done, is to try finding the position, by using only one Counter Input for each axis. This means that I use the value of the encoder as a counter, and I calculate the position with some software tricks. But for some reason, it does not work properly.
    I have heard that the method I use is not proper. Instead, I have been told that I must use the phase of the 2 Count Inputs, in order to find the direction to which the robotic arm is moving. But, the Count Inputs of the CTR are augmenting in parallel, when the robotic arm is moving forward or backward.
    How can I find the position of the robotic arm, as it is moving like a CNC ?
    Thank you very much.
    Message Edited by nikosfs on 08-21-2009 12:27 PM

    You don't want to use a cFP-CTR-500 card.  What you have are quadrature signals.  You should be using the cFP-QUAD-510.  It has 4 channels that can handle both the A and B signals of a quadrature encoder.  It has the built in circuitry do determine the phasing of A vs. B to know when to count up vs. count down.

  • How can we find the list of user exits for a transaction

    hi all
    iam new in user exits please send the basic details
    how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
    regards
    jagadish

    hi,
    check the below links for userexits
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    FAQ's
    http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    http://www.easymarketplace.de/userexit.php
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    1. what is the defference between enhancement and user-exits?
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    Re: difference between user exits & customer exits
    Some Questions ! Plz help...
    http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
    2. Difference between CMOD and SMOD?
    http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
    http://www.sap-img.com/abap.htm
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
    check these links..
    http://www.sapgenie.com/abap/tips_and_tricks.htm
    http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    passing selet-option variable to subrouine...
    Finding the user-exits of a SAP transaction code
    Finding the user-exits of a SAP transaction code
    Enter the transaction code in which you are looking for the user-exit
    and it will list you the list of user-exits in the transaction code.
    Also a drill down is possible which will help you to branch to SMOD.
    Written by : SAP Basis, ABAP Programming and Other IMG Stuff
                 http://www.sap-img.com/*
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    if u want to find the function exit
    then check the below code
    REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
    TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
    TABLES : TSTCT.
    DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA : FIELD1(30).
    DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
    TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'SMOD'
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
    TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(95) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Exit Name',
    21 SY-VLINE ,
    22 'Description',
    95 SY-VLINE.
    WRITE:/(95) SY-ULINE.
    LOOP AT JTAB.
    SELECT SINGLE * FROM MODSAPT
    WHERE SPRSL = SY-LANGU AND
    NAME = JTAB-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    WRITE:/1 SY-VLINE,
    2 JTAB-OBJ_NAME HOTSPOT ON,
    21 SY-VLINE ,
    22 MODSAPT-MODTEXT,
    95 SY-VLINE.
    ENDLOOP.
    WRITE:/(95) SY-ULINE.
    DESCRIBE TABLE JTAB.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , SY-TFILL.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    AT LINE-SELECTION.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    or
    1. in se11, goto table MODSAP
    View table contents
    2. in Type field, enter 'E' (for function exit)
    3. For that tcode, u should know the program name.
    eg. SAPLLMOB
    4. then type SAPLLMOB and execute
    or
    REPORT z34331_user_exit .
    TABLES : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    START-OF-SELECTION.
    Validate Transaction Code
    SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
    Find Repository Objects for transaction code
    IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir
    WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
    SELECT SINGLE * FROM tfdir
    WHERE pname = tstc-pgmna.
    SELECT SINGLE * FROM enlfdir
    WHERE funcname = tfdir-funcname.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'FUGR'
    AND obj_name = enlfdir-area.
    MOVE : tadir-devclass TO v_devclass.
    ENDIF.
    ENDIF.
    Find SAP Modifactions
    SELECT * FROM tadir
    INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object = 'SMOD'
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
    SELECT SINGLE * FROM modsapt
    WHERE sprsl = sy-langu AND
    name = jtab-obj_name.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    WRITE:/1 sy-vline,
    2 jtab-obj_name HOTSPOT ON,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
    GET CURSOR FIELD field1.
    CHECK field1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    Regards,
    Naveen

  • HT5035 i have a itunes gift card how can i find the balance on my card?

    i have a itunes gift card how can i find the balance on my card?

    If the value of the card isn't printed on it and you don't have the purchase receipt, the only way to determine the value of the card is by redeeming it. If you have already redeemed it, then the card is now valueless. The credit balance is carried in your iTunes Store account and will be displayed in iTunes next to your Apple ID when you're signed into the iTunes Store, or on an iOS device at the bottom of the screen in the App Store or iTunes Store apps.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base before you post a question.
    Regards.

  • How can i find the meta chain name?

    My process chains are running based on meta chain option,So how can i find the meta chain name???

    Hello
    Goto SE16
    Table RSPCCHAIN
    ut u r local chain name as varient and exe
    similerly goback if the chain you get is also a local chain....Until you get only one chain...
    Where Used List --
    RSPCPROCESSLOG table
    You can see the Process Logs at SM37 too based on the Technical name of the Chain you can trace the Meta chian
    Thanks
    Geeta

  • How can if find the most repeated character and number ???

    Hi,
    I have a question. For instance, if we have a text file which contains:
    aaabbbhhhhhhtttttsjs12366
    How can i find the most repeated character and number. I have to add this code to the following program:
    I will aprreciate if you can help.
    Regards,
    Serkan
    import java.io.*;
    public class LineLen {
         public static void main(String args[]) throws Throwable {
              final String filename = "deneme1.txt";
              BufferedReader infile = new BufferedReader(new InputStreamReader(new FileInputStream(filename)));
              String line = infile.readLine();
              int linenum = 0;
              while (line != null) {
                   int len = line.length();
                   linenum++;
                   System.out.print(linenum + "\t");
                   for (int i = 0; i<len; i++)
                   System.out.print("*");
                   System.out.println("");
                   line = infile.readLine();
    }

    For a small alphabet like English, array migt be used:
    //in a for loop
    ++array[s.charAt(i)];For a big alphabet like chinese, HashMap might be barely used:
    map.put(s.charAt(i), increment(map.get(s.charAt(i))));
    // increment is a user defined method, possibly for an Integer object,
    // that returns a new Integer object

  • How can i find the adobe form translations

    Hi Friends,
    how can i find the adobe form translations?
    i mean i want to know in how many languages my adobe form has been translated?
    is their any report or is their any technique to find the translations........................
    Thanks,
    Harish.K

    Hello Harish,
    To find the translation of Adobe form is nothing but to find the labels or texts used in this adobe form in various languages. This will give you an idea on how many languages your adobe form has been translated.
    So to find the translations in different languages, you have to go to Context node of the Adobe form. Then go through the text nodes which are used as labels. These will be normally stored as Standard texts in SO10.
    For example. Take the text name of any one text node.
    1) Go to SE38.
    2) Type program RSTXTRAN.
    3) Let the Text key - object be TEXT.
    4) Then enter this text name in the field Text key - name. I have put the sample standard text ZTEST_ADOBE as shown below.
    5) Let the Text key - ID be ST.
    6) In Text key - language, Enter *  (i.e enter the Asterisk) because you want to find out all the languages.
    The screen parameters will be as shown below.
    7) Now Execute this report.
    8) It will show all the various languages in which this particular standard text is used which is nothing but the Adobe form is being used in these many languages. For example, the standard text ZTEST_ADOBE is used in 3 languages, English, German and Spanish as shown below. It will look as shown below.
    Note: This will give you the more or less the overall idea of the form that has been used in these many languages. But also make sure the standard text with particular language is also linked with the Transport Request. Because there are chances that the text was created in a particular language but was never used.

  • How can i find the exact BADI For a Particular Transaction

    hi ppl,
    How can i find the exact BADI For a Particular Transaction. Is there any Standard transaction or Programs to do this or suggest some other way.

    Use this code:
    *& Report  ZGET_BADI
    REPORT  ZGET_BADI.
    TABLES : TSTC,
    TADIR,
    MODSAPT,
    MODACT,
    TRDIR,
    TFDIR,
    ENLFDIR,
    SXS_ATTRT ,
    TSTCT.
    DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA : FIELD1(30).
    DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS : P_TCODE LIKE TSTC-TCODE,
    P_PGMNA LIKE TSTC-PGMNA .
    DATA wa_tadir type tadir.
    START-OF-SELECTION.
    IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
    ENDIF.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR
    WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR
    WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR
    WHERE FUNCNAME = TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT in ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(105) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    *Sorting the internal Table
    sort jtab by OBJECT.
    data : wf_txt(60) type c,
    wf_smod type i ,
    wf_badi type i ,
    wf_object2(30) type C.
    clear : wf_smod, wf_badi , wf_object2.
    *Get the total SMOD.
    LOOP AT JTAB into wa_tadir.
    at first.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Enhancement/ Business Add-in',
    41 SY-VLINE ,
    42 'Description',
    105 SY-VLINE.
    WRITE:/(105) SY-ULINE.
    endat.
    clear wf_txt.
    at new object.
    if wa_tadir-object = 'SMOD'.
    wf_object2 = 'Enhancement' .
    elseif wa_tadir-object = 'SXSD'.
    wf_object2 = ' Business Add-in'.
    endif.
    FORMAT COLOR COL_GROUP INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 wf_object2,
    105 SY-VLINE.
    endat.
    case wa_tadir-object.
    when 'SMOD'.
    wf_smod = wf_smod + 1.
    SELECT SINGLE MODTEXT into wf_txt
    FROM MODSAPT
    WHERE SPRSL = SY-LANGU
    AND NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    when 'SXSD'.
    *For BADis
    wf_badi = wf_badi + 1 .
    select single TEXT into wf_txt
    from SXS_ATTRT
    where sprsl = sy-langu
    and EXIT_NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED ON.
    endcase.
    WRITE:/1 SY-VLINE,
    2 wa_tadir-OBJ_NAME hotspot on,
    41 SY-VLINE ,
    42 wf_txt,
    105 SY-VLINE.
    AT END OF object.
    write : /(105) sy-ULINE.
    ENDAT.
    ENDLOOP.
    WRITE:/(105) SY-ULINE.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No.of Exits:' , wf_smod.
    WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
    ENDIF.
    AT LINE-SELECTION.
    data : wf_object type tadir-object.
    clear wf_object.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(8) EQ 'WA_TADIR'.
    read table jtab with key obj_name = sy-lisel+1(20).
    move jtab-object to wf_object.
    case wf_object.
    when 'SMOD'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    when 'SXSD'.
    SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
    CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
    endcase.
    Regards
    Vinayak

Maybe you are looking for

  • Using report parameter in data set filter expression with an SSAS data source

    I have an SSRS report with an SSAS data source. Report parameters: Param1 - text, single select Param2 - text, multi-select Dataset: In Query Designer, I want to include Param1 as a filter expression so I can have "Dimension1 Begins with @Param2". I'

  • Export, Import and Table declaration in custom function module

    I am creating a custom function module. Parameters needed are export internal table and one data field from the internal table. What do i need to fill for 'associated type' for these export parameters since size of the internal table and type for the

  • IPhone 4 becoming completely unresponsive for no obvious reason.

    My iPhone had been charging overnight with no previous problems ever encountered since i first bought it just over two months ago. After checking the time on it (apparently working fine), i got up half an hour later putting the iPhone in my pocket. W

  • Decimal Value for Percentage distribution on Account Assignement in SES

    Dear Experts, While creating service entry, the qty should be distributed on percentage basis for Account assignment with decimal value. For Example Say Service 100% done but value is 10,000..but there is distribution to different cost center say K,

  • Flash 8 AS2 Smiles in chat

    Hello all! I have a chatbox and I want to replace "" with an emoticon  and when I enter it the image comes on the left side behind the username  instead of being before text inputed. I changed the code using "  align='right' " and now it goes on righ