How can I fix "1801 microcode update error" I have a hp compaq dc5700. I replaced my processor

how can I fix "1801 microcode update error" I have a hp compaq dc5700. I upgraded my processor to "core2Duo 2.6MHz, e4700"

Hi MOndo7299:
Thank you for your post. I am glad to help!
I assume that the P in the your post is for Processor. The "1801Mocrocode update error" is telling you to update the CPU.  There is more then one way to do this. You can do this by downloading and running the HP Support Assistant.  click here, to aid in updating drivers and resolving issues. You can update from Device Manager. Open Device Manager, right click on the processor and you should see an option to update. You could also check the manufacturer's site for any updates. For your convenience I am sending documentation on "Downloading or Updating Software and Drivers for HP Computers"  click here. If you require further assistance would you please provide your exact model number, and what changes you have  made. How Do I Find My Model Number or Product Number?  click here.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • How to fix "1801-Microcode Update Error" in HP Compaq dc7700p Convertible Minitower

    Hello, 
    i've been reading and reading this post for a several times and i'm not sure will this work on my PC so i must ask, how to fix "1801-Microcode Update Error" in HP Compaq dc7700p Convertible Minitower i've upgraded it with E7200 instead of the original E6300
    here's Product Number: p/n RN120ET#UUZ
    I'm able to boot up and start windows i don't know is it working normaly or not, i'm just annoyed with the boot message: 
    Please HELP and Thank You in advance !!!
    This question was solved.
    View Solution.

    Hi:
    You will need to update the BIOS to its latest version to get rid of the microcode error, and the processor will only run at half the FSB speed because the BIOS update was not written to make the E7xxx processors work correctly.
    You will need to run this software each time you get into windows and change the multiplier to the max.
    Or you can run that batch file listed on the below webpage for it to run automatically.
    http://crystalmark.info/software/CrystalCPUID/index-e.html
    If I were you, I would just install a Conroe E6700 and have a problem-free upgrade.
    You will need to use the DOS based flash because I don't think there is a BIOS update written for W7.

  • How to fix "1801-Microcode Update Error" in HP Compaq dc7600 Minitower

    Dear Sir,
    I am using hp compaq dc7600U  with pentium (R) 4 3.00 GHz. processor. When I changed the processor with Pentium D 3.4 GHz. processor I found a message " 1801 Microcode Update error" Press F1 to continue. After pressing F1 computer works normally. I want to know that how I can remove this error message. 

    Please see my reply to your other post at the link below...
    http://h30434.www3.hp.com/t5/Desktop-Hardware/how-to-fix-quot-1801-Microcode-Update-Error-quot-in-HP...

  • How to fix "1801-Microcode Update Error" in HP Compaq dc7600 Convertible Minitower

    Dear Sir,
    I am using hp compaq dc7600U  with pentium (R) 4 3.00 GHz. processor. When I changed the processor with Pentium D 3.4 GHz. processor I found a message " 1801 Microcode Update error" Press F1 to continue. After pressing F1 computer works normally. I want to know that how I can remove this error message. 

    Hi:
    You need to install the microcode update by using a bootable flash drive with the common MS DOS Command files and the contents of the microcode flash file included on the bootable flash drive.
    Then you type Flashbin.exe at the command prompt you get when you boot from the flash drive, and hit the enter key.
    Follow the on screen instructions to update the microcode.
    I have attached the tool to make a usb flash drive bootable and the MS DOS system files to copy onto the flash drive.
    See the 3 files below under Attachments.
    Unzip and copy the DOS  files without any folders to the flash drive after you run the HP tool to make it bootable.
    I have also zipped up and attached the microcode update files.
    Unzip them and put them on the flash drive too without any folders after you make the drive bootable.
    Attachments:
    SP27608.zip ‏1817 KB
    Dos System Files.zip ‏243 KB
    DOS Flash.zip ‏73 KB

  • How to fix "1801-Microcode Update Error" in HP Compaq dc7800 Convertible Minitower

    I have Intel Core 2 Duo @ 2.93 Ghz. My operating system is Windows 7 Ultimate x64. 
    This question was solved.
    View Solution.

    Hi:
    The E7500 processor is not supported in the dc7800, which is why you are getting the microcode error.
    Below is the list of supported processors.
    Intel Core 2 Duo Processors:
    Intel Core 2 Duo E4500 Processor (2.20-GHz, 2 MB L2 cache, 800-MHz FSB)
    Intel Core 2 Duo E4600 Processor (2.40-GHz, 2 MB L2 cache, 800-MHz FSB)
    Intel Core 2 Duo E4700 Processor (2.6-GHz, 2 MB L2 cache, 800-MHz FSB)
    Intel Core 2 Duo E6550 Processor (2.33-GHz, 4 MB L2 cache, 1333-MHz FSB)
    Intel Core 2 Duo E6750 Processor (2.66-GHz, 4 MB L2 cache, 1333-MHz FSB)
    Intel Core 2 Duo E6850 Processor (3.0-GHz, 4 MB L2 cache, 1333-MHz FSB)
    Intel Core 2 Duo E7200 Processor (2.53 GHz, 3 MB L2 cache, 1066 MHz FSB)
    Intel Core 2 Duo E7300 Processor (2.66 GHz, 3MB L2 cache, 1066 MHz FSB)
    Intel Core 2 Duo E8200 Processor (2.66-GHz, 6 MB L2 cache, 1333-MHz FSB)
    Intel Core 2 Duo E8300 Processor (2.83-GHz, 6 MB L2 cache, 1333-MHz FSB)
    Intel Core 2 Duo E8400 Processor (3.00-GHz, 6 MB L2 cache, 1333-MHz FSB)
    Intel Core 2 Duo E8500 Processor (3.16-GHz, 6 MB L2 cache, 1333-MHz FSB)
    Inter Core 2 Duo E8600 Processor (3.33-GHz, 6 MB L2 Cache, 1333-MHz FSB)
    As a long shot, you can try installing the latest microcode update. You need to use a bootable USB flash drive with dos files so you can run the flashbin.exe command after you copy the microcode update files to your bootable flash drive.
    I can't get to the dc7800 support site. When you can, select the microcode update download from 2010  v1.14
    If you are unfamiliar with how to make a flash drive bootable, here is a good "how to" article with the files you need.
    http://www.techpowerup.com/forums/showthread.php?t=47812
    Paul

  • Xw6200 1801 microcode update error

     Hi I have recently upgraded my xw6200 workstation cpu from 2 x intel xeon 2.8 ghz to 2 x inel xeon 3.6 ghz. the problem is when i but up my pc i get a error "1801 microcode update error" and give me the option to boot by pressing f1 and the it boots up no problem apart from the fans are a lot noisier. is there a way to solve this error every time i boot up. its not a massive problem as windows runs fine after i press F1 but any help would be appreciated thanks.

    Unfortunately, the latest  version of the installed BIOS version is as good as it gets.
    The BIOS family 786B7, which your BIOS is a member of,  was last updated in 2006.
    Unless a microcode update can be found through Windows update or at Intel for the installed operating system, this may be an issue that I am unable to help you resolve.
    Normally a BIOS update is the answer, but no more exist.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How Can I Fix A QuickTime Codec Error?

    How Can I Fix A QuickTime Codec Error?
    I have several movies from 2008 that are labeled as .mov but I now get a QuickTime error saying "The document "XXXXXX" could not be opened. A required Codec isn't available."
    These movies ran in QuickTime just fine until about a month ago.
    All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
    If I click on the Thumbnail Preview "It" runs.
    How can I fix this?
    TOP image is the Error message.
    BOTTOM image is the Thumbnail Preview info.
    I've checked out "Tell Me More" and have not found a solution.

    How Can I Fix A QuickTime Codec Error?
    The basic work flow is to determine which codecs were used to create the non-playing file and then check to see if these formats are supported by your current system codec component configuration.
    If the files will open in one of the QT player app, the open the inspector window to see which codecs were used to create the original file as seen here...
    or here in the "Format" entry...
    Or, if you have QT 7 keyed for "Pro" use, you can open the "Properties" window to gain even more information as demonstrated here...
    if you file will not open in either of the QT Player apps, then you can try opening the Finder "Get Info" window for the file,
    use a third-party media player that will open the file, or
    use a dedicated media information utility to learn this information....
    Once you know what codecs were used to create the file, post back with this information so we can deterine if the file should be natively supported by your Mac OS X install, requires an Apple Pro editing codec normally installed by the editor app, or requires a third-party codec which the user must supply.
    These movies ran in QuickTime just fine until about a month ago.
    All the folders in which these movies were stored in 4 folders in 2 folders in one folder. All folders at each level were encrypted with Stuffit Deluxe a version circa 2008 and decrypted with a newer Stuffit Deluxe 10.x. Other movies that are NOT .mov and in with the .mov movies still run.
    Your information does not indicate whether or not the files actually played on the current system or were transferred from a different system which was properly configured for playbac, whether or not you recently upgraded your operating system/modified your codec component configuration by adding or deleting any codecs, whether your compound "Stuffing" of the files created corruption, etc.
    As to MOV files the selves, this extension just implies the data was placed in the QT generic file container and the actually data could be of any compression format thathat was compatible with the codec component configuration for the system on which the files were created and could include natively supported system codecs, pro editing codecs, and/or third-party proprietary or hybrid codecs. (I.e., this is why we may need more information regarding the individual non-playing files.)
    If I click on the Thumbnail Preview "It" runs.
    f you are referring to QuickLook (QL) then the technology is different than QuickTime (QT). In the former case, the system is playing representative data but not actually opening the file as QT does. Thus, there is always the possibility that the problem is in the file structure (atom) information. For instance, suppose someone merely changed the MOV file extension in the Finder rather than actually copying data to a real MOV file container. Then it is possible that the QT player app may be searching for a codec that is not supposed or expected to be supported in the MOV file container and, not finding it, issues the erroneous codec error message—especially since you did not inticate the source of the file you are trying to play or, in some cases, which QT player is now not playing the file.
    In short, there are several possibilities here and not enough specific information.

  • TS3694 How can I fix this type of error in iphone 4?"The iphone could not be restored. An unknown error occurred (3194) "please help me.

    Hi everybody !
    AT&T company is unlocked (factory)my iphone4 before 3 days ago so i want to restore to unlock iphone 4 with itunes but it is not restore.
    How can I fix this type of error in iphone 4?- "The iphone could not be restored. An unknown error occurred (3194) "
    please help me in nepali language(if posible) or english. thank you.

    http://support.apple.com/kb/TS3694#error3194
    This means that either your firewall/antivirus is blocking access to Apple's servers, or you have used your computer to jailbreak an iDevice in the past. The link above tells you how to resolve this issue.

  • My ipod disabled itself for 23 million minutes. How can I fix it if I don't have itunes on my computer?

    My ipod disabled itself for 23 million minutes. How can I fix it if I don't have itunes on my computer?

    A computer with iTunes is not required
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You need the iPod and iPad conencted to the interned and FindMyiPod turned on on the iPod an the iPad need to have the FindMyiPhone app installed. That now requires iOS 7 on the device.
    You can also wipe by on a computer/s browser, going to icloud.com>FindMyiPhone

  • TS3694 how can i fix an apple support error 2 issue

    my computer lets me install itunes however it say i cant run it because i need apple app support. how can i fix this error?

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • How can i fix  sorry, an unexpected error occured. Please try again later. Error code:-1012 (NSURLEErrorDomain)

    guys, im having problem when logging to facebook using my ipad2.. it has a pprompt message of;
    "Sorry, an unespected error occured. Please try again later. Error Code:-1012 (NSURLEErrorDomain)"
    how can i fix this error?
    need your help and inputs..
    regards

    Hello migoy1201,
    It sounds like you are experiencing this error with just the FaceBook app.  I recommend following the steps in this tutorial for an issue with a specific application:
    Using apps on your iPad
    https://www.apple.com/support/ipad/assistant/application/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Lately pdf files from the Web do not display properly; what is wrong and how can I fix it so I don't have to use IE?

    I am a professor and frequently need to open pdfs of academic journal articles from electronic databases. Within the last two or three weeks, when I try to do this using Firefox, only the first page of the pdf displays and the rest are blank. In addition, a bar appears across the top with the message "This pdf file may not display properly." So I have had to switch to Internet Explorer to open the files and do my research. What is going on and how can I fix it so I can open pdf files from the Web in Firefox and have them display properly?

    My question is simple - why would you put an application in production that has a lot of bugs? To replace a good and steady Adobe product? My customers will believe that I put a pathetic fallible form online. They are not sophisticated on computers so I just tell them to use IE. Ugh
    I must agree with pgwebgirl!

  • My IPad Retnia does not charge when plugged in using the USB from my computer to car adapter, how can I fix this to be able to have flexibility in charging?

    When I plug me IPad into the USB connector to my laptop or into my car charger, it show as not charging. How can I fix this so that I can charge my Pad in these settings?

    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    And this - Unplug the charger from the iPad and then replug. May resume charging.
    Or - Recalibrate the battery. See link below.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • HT1459 My daughter forgot the password to her IPod & disabled it.  How can I fix this? I do not have the serial number because it was purchased used!

    My daughter reset her IPod and after doing so the Ipod asked for a password.  We do not have a serial number for the Ipod as it was used.  The IPod is now disabled.  How can I fix this?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • How can I fix a dbwrap.exe error that prevents a SharePoint 2010 installation?

    Every time I attempt to install SharePoint 2010 on my Windows 7 64-bit laptop I get the following error in the setup log:
    'dbwrap.exe' failed with error code: -2068578304. Type: 8::CommandFailed.
    The installation aborts.  I need more information.  How do I fix this problem?J Tom Kinser

    thank you so much Yuming.
    I get the same issue while installing Sharepoint on Win 7. I check out error logs and get to know it's SQL Server Express issue.
    First I found this in DBWrapLog log:
    INF:0:Cannot find sql express instance. Do fresh install.
    INF:0:Try to install SQL Express.
    INF:0:Entering function RunCommand
    INF:0:Starting process C:\Program Files\Common Files\Microsoft Shared\SERVER14\Server Setup Controller\sqlexpr.exe with args  /q /HideConsole  /ACTION=install /pid=11111-00000-00000-00000-00000 /FEATURES=SQL,Tools /SQLSYSADMINACCOUNTS="BUILTIN\ADMINISTRATORS"
    /SQLSVCACCOUNT="NT AUTHORITY\Network Service" /INSTANCENAME=SharePoint /INSTALLSQLDATADIR="C:\Program Files\Microsoft Office Servers\14.0\Data" and waiting 00:49:10 for it to stop
    ERR:-2067919934:Leaving function RunCommand
    Then I start my SQL Express instance and run Sharepoint setup to repair. However I got this error again in DBWrapLog:
    INF:0:Entering function RunCommand
    INF:0:Starting process C:\Program Files\Common Files\Microsoft Shared\SERVER14\Server Setup Controller\sqlexpr.exe with args  /q /HideConsole /ACTION=Repair /INSTANCENAME=SharePoint and waiting 00:49:10 for it to stop
    ERR:-2068643839:Leaving function RunCommand
    INF:0:Try to config SQL Express instance.
    INF:0:Grant Exec Right for dbo.sp_add_job
    INF:0:Data Source=.\SharePoint;Initial Catalog=msdb;Integrated Security=True;Pooling=False
    WRN:0:Fail to config in the number 1 try, will sleep 10 seconds and try again. The exception is System.Data.SqlClient.SqlException:
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
    (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
    up to here, I get stuck.
    Can I consult this: How do you know to change value from reg HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\ServerRole. And what does this mean?
    Another Leon

Maybe you are looking for