How can I fix a time error on my MacBook?

How can I fix a time error on my MacBook?

If, after checking the settings in Sys Pref> Date/Time nothing really changes
you could see if a reset of the NVRAM could help.
Read carefully & when using the keyboard sequence, let the computer
start tone sound three times, to be sure the reset has really occurred.
•About NVRAM & PRAM:
http://support.apple.com/kb/HT1379
Does the time gain by itself? Is the Time Server set to automatically
keep the computer time corrected when you are online? You may
also try the manual settings, if the computer had not been used in
some time, because if the battery gets too low, the capacitor in a
portable computer can also lose power, & NVRAM - PRAM chip
settings could be lost. However by then, Date can also be wrong.
Was there anything else going on that may have affected this?
Sometimes odd items are related to something else.
Good luck & happy computing!

Similar Messages

  • How can i fix a 4280 error code when trying to burn cd's on itunes

    How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C

    Did you by chance find out a solution with your problem?     I am having the same issue with the same drive.    I even uninstalled iTunes and completely reinstalled it.
    Thank you for any help anyone can offer.    I'm not having any luck finding answers on the net.     Thx.

  • How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

    How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

    Hey Debbiered1,
    Follow the steps in this link to resolve the issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    When you uninstall, the items you uninstall and the order in which you do so are particularly important:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • TS3694 how can i fix the itunes error 1638,3194 when i am restoring my ipad 2 wifi?

    how can i fix the itunes error 1638.i changed my hosts file but i recive this error again.what can i do?

    See Apple support Article
    http://support.apple.com/kb/TS3694?viewlocale=en_US#error1638

  • How can I fix apple tv error "this content requires hdcp for playback"

    how can I fix apple tv error "this content requires hdcp for playback" I've done everything suggested in troubleshooting and still my apple tv don't work.  I'm thinking on returning it, since it doesn't work.

    Welcome to the Apple Community.
    Check that the HDMI cable is correctly seated at both ends.
    Try disconnecting the cable and connecting it again.
    Try another HDMI cable.
    Make sure your TV supports HDCP
    Try the Apple TV with another TV

  • How can I fix my communications error be my HP officejet j6480?  The printer still works.

    How can I fix my communications error between my Mac OS X and my HP Officejet J6480?  My printer still works.

    It is an HP Office jet 4635...%help

  • HT204408 Internal FaceTime error occurred.  How can I fix and run FaceTime on my MacBook  running 10.6.8

    How can I fix face to run on my MacBook running 10.6.8. The error is "internal face error occurred.

    I was getting the same error, and I could not find the file to copy that others had mentioned.  However, I found a fix that works for me.  I did a "control + click" on the facetime icon in the dock, selected "options" then "remove from dock".  Once it was gone, I opened "launchpad" opened Facetime from launchpad, then when the icon was in the dock I did another "control + click", "options" and then "keep in dock".  Now I have no problem opening it.  Hope this helps someone else.

  • HT1414 How can I fix a 2001 error code

    How can I fix a 2001 error code

    This is USB related issue. See these steps for resolution.
    http://support.apple.com/kb/TS3694#2000

  • I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

    I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

    Hi there Rlong50,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    -Griff W.

  • How can i fix a missing footing on a Macbook? superglue?

    how can i fix a missing footing on a Macbook? superglue?

    If you don't want to buy a new bottom case and your mac is out of warranty, sure superglue should hold whatever you are going to use as one of the "feet" to the mac.  Some adhesive is necessary.

  • How can I fix this printer error with Samsung SCX-4300 and SCX-4521f on Windows Server 2008 R2?

    I have two printers installed on Windows Server 2008 R2 (64-bit):
    1. Samsung SCX-4521f
    2. Samsung SCX-4300
    There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
    The drivers installed are as follows:
    SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7    3.04.96:03    Print Driver    11 Dec, 2009    12.37    MULTI LANGUAGE)
    SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
    After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
    On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
    The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
    The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
    Neither will print a test page.
    Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
    The error persists and nothing will print.
    When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
    "Printer: Error" and "N document(s) in queue".
    Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
    As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
    Once all the jobs are cleared the printer information says "Printer: Ready".
    Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
    With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
    However, I can't see any specific error messages.
    How do I find out what exactly "Needs troubleshooting"?
    Please can anyone advise further?

    The printer (SCX-4300) has stopped again.
    Since it has been stopped I have done your recommendations:
    Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
    Set the "Interactive Services Detection" to Automatic and started it.
    Unfortunately the printer did not start printing, the print jobs did not restart or delete.
    I decided to check the Operational logs that we enabled.
    The first job I see goes like this:
    Information: Rendering job 41.
    Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
    Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
    sandbox). Win32 error code returned by the print processor: 0x0.
    Information:Printing job 41.
    Information:Spooling job 41.
    This job actually printed.
    Other jobs printed fine with no error.
    There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
    Any ideas what to try now?
    Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now.

  • TS3694 how can i fix a 3014 error for the iOS 6 update

    I tried to update my iPhone 4 to iOS 6, and when it was restarting, it gave me the option to restore it. When i click restore, it comes up with an message about error 3014. How can this be resolved? Because my phone is now frozen in the restore stage.

    thy this article http://lastplaceonthe.net/fix-itunes-error-3014-upgrading-iphone-firmware/
    Ryan

  • How can I fix the time in my iphone5c

    My iphone 5c time sets still, it loops back to the time of last reset.  I have done different resets, and even taking it to the genius bar and they were not able to make my phone show the right time.  they say it is a hardware issue, not software.  Any ideas? it all started with wifi issues, then imessage until finally time issues.  change the settings to manually, back to automatic and still didn´t fix the time.  Please help.
    I updated to the last IOS 8.1.3, done setting reset, content and setting reset, itunes restore/reset, applecare guided reset. change time manually and automatic.  genius bar reset, and time issue has not been fixed.

    You will get this warning, if your book includes textboxes that still include the default text, like "Insert Title". You need to find these boxes and add your own text.  Look for boxes like this:
    Make a PDF-preview of your book and look, where the preview differs from what you are seeing in iPhoto.
    iPhoto, Aperture: Previewing an order in iPhoto or Aperture

  • How can I fix this graphics problem on my Macbook Pro?

    Whilst playing numerous games on my Macbook Pro, I have noticed the same problem. This causes the game to be almost unplayable and usually happens after playing the game for a while. I have had this happen on many games such as Portal 2, World of Warcraft, Team Fortress 2, Starcraft II and a few others.
    I have had this problem ever since I first got my Macbook Pro, but the issue has changed slightly since. A software update a long time ago caused the problem from affecting the whole screen to just affecting the window the game was being played in.
    I can sometimes fix the problem by opening the Display preferences in System Preferences and it automatically fixes itself - without me doing anything. There is another way I have found to temporarily fix the problem, however this has only worked on World of Warcraft. It involves changing the reselecting the display in the video settings and reapplying it - causes the game screen to go black for a few seconds and the issue is resolved.
    The problem is that the graphics on the screen start to flicker and move about and certain sections are missed out. It's kind of like a fuzzy tear in the screen.
    I have a attached an image of the worst case of this that I have had (I managed to screenshot it).
    System Specs
      Model Identifier:          MacBookPro7,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Memory:          4 GB
      Chipset Model:          NVIDIA GeForce 320M

    Does it do the same thing if you boot from a different disk, like your old Mac OS X install disk?  I see you're running Lion, so also try booting from the recovery partition by holding down command and r at startup.
    If it can't boot from any system, it's a hardware issue.  You'll need to contact Apple for service.  If you can boot from the recovery partition, try repairing the hard drive with Disk Utility.  You may also want to try running Apple Hardware Test.

  • HT201364 plug in failure. how can i fix them? I have a MacBook. mac OS X version 10.6.8. how can i uptade to Mavericks?

    I have a macBook. Mac OS X version 10.6.8. How can i uptade to Mavericks?

    If your machine supports Mavericks you can download it via the App Store.

Maybe you are looking for