How can I fix a Window that disappears Off Screen

Hi,
I'm running a new installation of MAX/msp and the output window does not appear on my monitor. When I use exspose the window comes in to view but when I click on it it disappears off screen to the left, therefore I can't grab it with my mouse.
I think the problem stems from when I was using dual monitors, one of which burned out so I am now only using one.
So far I've deleted all the MAX/msp preferences that I can find.
I've looked in System Preferences - Displays - This shows that my mac only expects to see my single monitor.
I remember in OS9 there was a key command to allow you to move windows without the use of a mouse - If there's one for OSx it would probably solve my problem but I can't find it.
I'm using a G4 dual 867 OSX 10.4.7 with a SyncMaster920n monitor
Any help appreciated
James
G4 dual   Mac OS X (10.4.7)  

ok problem solved from within MAX
Menu: window -> alt + click window of your choice
James

Similar Messages

  • On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

    On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

    Click on the Hot Corners..  button and look at the four definitions.  In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop.  Set it to "-" to deactivate.

  • I've installed the Adobe Reader Plug In. Yet every time I click to see a PDF, it opens another browser and it is blank. The Browser reads about:blank. How can I fix this so that PDF's open in the browser?

    I've installed the Adobe Reader Plug In. Yet every time I click to see a PDF, it opens another browser and it is blank. The Browser reads about:blank. How can I fix this so that PDF's open in the browser?

    Check your settings in Options > Applications: https://support.mozilla.com/en-US/kb/Opening%20PDF%20files%20within%20Firefox#w_check-firefox-settings
    Also see:
    *https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox
    *http://kb.mozillazine.org/File_types_and_download_actions
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

  • I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    How are you trying to transfer it and what are your setting on iTunes.  I'm not on a computer that has iTunes at the moment so I'm going from memory and similar issue.  If iTunes is set to sync music then I don't think you can select and drag, if set to manual manage music then you can.  Also make sure you are dragging to music on the iPhone.
    Hope this helps

  • Everytime that I sign on FaceTime on my macbook pro, it says "the server encountered an error processing registration. Please try again later". How can I fix this so that I can use facetime again

    Everytime that I sign on FaceTime on my macbook pro, it says "the server encountered an error processing registration. Please try again later". How can I fix this so that I can use facetime again

    Not a solution, but was able to login at work.   Then when I got back to the hotel all was fine and it works now.  Just will not change IDs I guess.  

  • When I try to text my mom, she never receives my text, it always shows as an imessage and never an sms. How can I fix this so that it can be sms like before?

    When I try to text my mom, she never receives my text, it always shows as an imessage and never an sms. How can I fix this so that it can be sms like before?

    Does your mom have an Apple device?

  • How can I fix a tune that didn't download right?

    I bought a tune and it plays only for a few seconds even if it says 5 minutes of time...  how can I fix that?  Can I be refund and retry or is it to complicated?  I didn't find anything on that subject.
    Thanks for helping me out!

    Hi Melanie2690,
    Thanks for using Apple Support Communities.
    Refund will be one of the options when following this article.
    For more information on this, take a look at this article:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Best of luck,
    Mario

  • How can you fix a phone that is taken apart?

    How can you fix iphone that is taken apart?

    You can try ifixit.com. But most likely all it's good for now is recycling. Don't put it in the trash.

  • How to get back windows that are off screen?

    I use my macbook at work with one attached display, and then at home with a different attached display. The two extra displays are different sizes. A lot of times when I plug it into the smaller of the two displays, some of the windows come up off screen and I can't figure out how to drag them back on. For example now I have a Microsoft Word window where the bottom half is on the screen, and the top half is up above the top of the screen. The only way I know to move a window is to grab the top edge and drag it, but the top edge is off the screen so I can't do that.
    Also sometimes a window is bigger than the screen height, and the only way I know to make it smaller is to drag the bottom right corner, but the bottom right corner is off the screen and the window height is bigger than the monitor height.
    Is there a way to get these windows back all the way onto the screen? Thanks.

    This is one of the most serious flaws of the Macintosh, and in many instances there is just NO answer. You could resort to writing a script using the Script Editor, but this seems a tough way to get round what is essentially a bug in the OS - it has been there for over 20 years and I don't think Apple are about to realise that the age of multiple screens and changing screen sizes is here NOW and it is time to change so we can resize from any border like all other modern OSs.
    If you want to try the script approach - try this link for help:
    http://www.transparen.com/macintosh-technical-support-group/window-offscreen

  • How can I fix my display that had vertical lines when I open/close the lid?

    Just a few minutes ago, as I was adjusting the Macbook's lid, I got a huge vertical line showing on my display. The line goes away after I fiddled with the lid a little. Now, every time I open/close the lid, the lines sometimes pop in and out, always in the same area.
    I'm scared the wires connecting to the Macbook's display is loose or something. What can I fix it?
    Here's a picture of how it looks like: http://img341.imageshack.us/img341/7683/picture4gj.png

    Sounds like the LVDS cable might have come loose somewhere or is faulty, would not say it's the LCD just yet. If it's under warranty just take it to any apple store or local service provider. If it's out of warranty I would not suggest taking to an Apple Store because they will just quote you the whole display, but an Apple Service Provider might be able or wiling to attempt to just repair the faulty part in the display(just know your model display does not come apart easily) http://support.apple.com/kb/HT1434 , good luck

  • How can I fix my iPod 5 th gen screen it's cracked to the max and it's also broken where can I go to fix. It and how much would it cost to maybe switch it in or get a new screen replaced

    How much will it cost to get a cracked screen to get replaced or just to switch in a ipad 5th gen broken  iPod

    Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
    Apple - iPod Repair price                       
    The following will void the remainder of your warranty
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit

  • How can I get my window to fit the screen?  It is too big.

    All of a sudden a few days ago my window on my MacBook pro expanded and now does not fit all at one time on the screen.  I must have done something but do not know what.  I hope someone can help me to get the window to fill the screen so I don't have to move the window back and forth to see everything.  Thanks, Quinner

    Turn off Zoom from the Universal Access and Keyboard & Mouse panes of System Preferences.
    (107642)

  • How can I fix a website that's not compatible with Firefox?

    I work with a website (www.cumctopeka.org) which seems to have compatibility issues with Firefox. I upload audio files through the program FileZilla, and through the website designer Bridge Element (www.bridgeelement.com). Recently the problem has occurred that when audio files are uploaded, they are played as video files through Firefox. Internet Explorer is able to play the files, but not Firefox. I've contacted Bridge Element's tech support several times and they finally said it was a Codec issue with Firefox and some Windows OS. I've personally been able to use Firefox on cumctopeka.org on a Windows 8 and everything works as it should, but then another WIndows 8 laptop will have issues.
    The audio files can be found here: http://cumctopeka.org/~cumctope/sermon-series.php
    Any help available...?

    ''andywhitakersmith [[#question-1054643|said]]''
    <blockquote>
    Recently the problem has occurred that when audio files are uploaded, they are played as video files through Firefox.</blockquote>
    I think this is normal, actually. When you load an MP3 "full tab" with the content type audio/mpeg Firefox does use the "video" tag. I think this is left over from a time when there were some limits on the controls of the audio tag.
    Anyway, if you want more control over the choice and appearance of the player, you would need to embed a player in your list page.
    ''Edit: fixed typo.''

  • How can I fix a problem that I guess that has to do with DirectX?

    Hello. I'm currently having an issue while attempting to play Arma 3. Everytime I join a lobby/session in Arma3, I can play about 5, 10, 15 or 20 minutes, but no longer because at a moment, my screen freezes if I am playing it in Fullscreen, but if I'm playing
    in Windowed Mode, I get this error message saying "DX11 error : buffer Map failed : DXGI_ERROR_DEVICE_REMOVED",
    and with that happening, I am not able to play. I have posted about this issue on Arma 3 Forums, etc.. And I got alot of different answers so I will list them and ask which one should I do and if there are more solutions, I'd like to know.
    - Disable Windows Aero when playing Arma 3.
    - Uninstall and Install DirectX to update.
    - Reinstall Arma 3.
    - My clock might be overclocked. (I don't know how that would bug a game).
    Thank you for taking a look at my thread. I hope you can be able to help me out!

    Hello,
    Are you using the latest drivers on your displaycard / latest DirectX -version?
    Have you run Dxdiag.exe and checked there are no erros to be found there?
    Have you changed your display settings (ingame and also in windows level)? You should check if the error still happens if you lower your graphics settings.

  • We have 5 devices connected to the same apple id. My kids want to text from their iPods but its connected to my iPhone number and my email. How can I fix it so that their txts to their friends don't look like they are from me?

    We have 5 devices connected to the same apple ID. My kids want to text from their iPod but when they do, it shows up on their friends devices that it was sent from my email or cell phone #. Is there anyway to fix this?

    See:
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
    You will also have to uncheck your phone number is Settings>Messages>Send and Receive. You can't delete the phone nunber since it associated with your yur accounbt whch has the phone.

Maybe you are looking for

  • Compressor Stuck @ 99% for the 4th time...

    I successfully got project 1 of 2 out yesterday, workflow went like this: (From FCP) "Send to: Compressor" Select destination/compression settings. Submit batch (3 different timelines to be encoded." In this instance, Compressor successfully complete

  • Box in a main window  with a header text in it

    Hi Abapers, I am new to sapscripts and have got an issue where a box  in the main window of the first page is not getting printed in the next page when the data is flowing to the next page . below is the code in the main window. BOX FRAME 10 TW HEIGH

  • Disabling workflow email notifications

    Hi gurus, One of my users is no longer approving timesheets. therefore, he would like that he stops getting emails from Workflow for him to approve timesheets. The workitems are all blank which is odd. Any ideas to help in stopping the emails from be

  • Tabular Model Partition

    Hi everyone Please help me, I am new to the tabular model  My table data size big having millions of records , i need to apply the Partition on my tables month wise or Year wise. I have search many blogs but i could not able to find the right solutio

  • Workstatus BPC7.5 SP06

    Hello Guru's, Is it possible to view the workstatus via EVLCK for entities which i have no read rights for? Version: BPC7.5 SP06  Regards, Jeff Edited by: jefferzonzz on Sep 6, 2011 4:46 PM