How can I fix error 14 in my iPod Touch restore?

When I try to restore and update my iPod Touch, appears Error 14 in my iTunes interface. How can I fix that error?

Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Above from:
http://support.apple.com/kb/TS3694#error14

Similar Messages

  • How do you fix Error 1004 on an iPod Touch?

    My iPod Touch shows a message every time time I try to update or download an app that says Error 1004 and the app is unable to be downloaded. If anyone knows how to fix the error, please post a comment to help me.
                                                                                                                            Thank You  

    from: http://support.apple.com/kb/TS3694#error1004
    Error 1004 and 1013: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to default on Windows. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • How do i fix error code 3014 on ipod touch 1st generation?

    please help

    Hi justinlee1234,
    Welcome to Apple Support Communties!
    Take a look at the article linked below, it provides tips for resolving the 3000-3020 alert messages, which indicate iTunes cannot communicate with the update server.
    Error 3194, Error 17, or "This device isn't eligible for the requested build"
    http://support.apple.com/kb/ts4451
    Resolution
    If you see one of these messages and need help updating or restoring your iOS device, install the latest version of iTunes and try to update or restore again. If you need more help, follow these steps.
    Check your hosts file
    After you update iTunes to the latest version, check the hosts file to make sure your computer can contact the update server.
    If you’re using a Windows computer, follow the steps in this Microsoft support article (note that resetting thehosts file will affect software services that rely on hosts file redirects). If you're using Windows on a business computer, consult your IT department to be sure applications will work correctly after you reset the hosts file.
    If you're using a Mac, follow these steps:
    In the Finder, choose Applications > Utilities.
    Open Terminal.
    Enter this command and press Return:
    sudo nano /private/etc/hosts
    Enter the password you use to sign in to your computer and press Return. You won't see text appear in the Terminal window when you enter the password. Make sure you use a nonblank administrator password.
    Terminal will display the hosts file.
    Navigate using the arrow keys and look for an entry containing “gs.apple.com”.
    Add the # symbol and a space ("# ") to the beginning of the gs.apple.com entry.
    Press Control-O to save the file.
    Press Enter when asked for the filename and Control-X to exit the editor.
    Restart your computer.
    Try to update or restore your iOS device again.
    Address TCP/IP filtering, firewall, or security software
    If you have TCP/IP filtering, firewall, or security software installed on your computer, follow these steps.
    Follow these steps to configure or temporarily uninstall your security software.
    Bypass your Internet router. Some routers might block iTunes from accessing the update server. If you're using a router that isn't manufactured by Apple, try these steps.
    Disconnect from your wired or wireless router.
    Use an Ethernet cable to connect directly to your modem.
    Restart your computer and modem. Contact your Internet service provider for instructions on using your modem.
    Be sure you have a working Internet connection by visiting www.apple.com. See these steps for help or contact your Internet service provider.
    If your Internet connection is working, try to update or restore your iOS device again.
    Restore or update on another computer
    Try to restore or update on another computer with a different Internet connection. This will help rule out other issues on your computer that might stop iTunes from communicating with the update server.
    Errors 1639, 3000-3020, and 3100-3999 (with the exception of 3194) are sometimes caused by your network settings. If your computer uses a managed network, refer to your network administrator. Proxies, firewalls, and other network security measures can cause these errors. If necessary, find a different network connection to restore the device. For example, if you're restoring at work, try to restore at home or on a friend's computer and network.
    -Jason

  • How can i fix a white screen on ipod touch

    all of the sudden the screen went white and i have no access.HELP

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How do i fix error 9 on my ipod touch

    ok so my ipod went dead for a few days so i went to charge it and i got the symbol on the screen to connect it to itunes. i connected it and it said that i had to restore my ipod...so i clicked restore...it was almost finished restoring and it came up that error 9 occured.
    is there anything i can do to fix my ipod or should i get a new one?
    I have tried to do what the apple website tells me to but it doesnt work....
    thanks!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

    How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

    Steve,
    I appreciate your answer.  While it might work, I'm a bit hesitant to remove the other programs as a possible solution since they are all currently working.
    With Acrobat 9 Pro failing with the OS 10.7 upgrade, I'm hoping that there is a less severe solution.
    Since the trigger appears to be 10.7 and may have something to do with the discontinued support of Rosetta, I could be spending a few hours working on a reinstall without a change.  Yes, it might work.  The "might" is the part that makes me hesitate.
    Is anyone else out there on OS 10.7 and running Acrobat 9 Pro?  Any issues with anyone else?
    Thanks Steve.  I do appreciate your offering a solution.  I may end up trying it if nothing else comes together.
    Mark

  • How can I fix error -1202 when trying to purchase I tunes?

    How can I fix error-1202 when trying to purchase itunes?

    If you used iTunes on your computer to download the app, suggest you download the app using your iPad. Should then install correctly.
     Cheers, Tom

  • How can I fix error code 403?

    How can I fix error code 403?

    Hi Roiby,
    We need more information regarding the error you mentioned here?
    Please have a sahre with what actions, what changes on the PC recently, check into event viewer and see if related logs we could found out.
    Further, if this is related with Windows update, you may take a look at hte folloowing article:
    "Error 403 Access Denied/Forbidden" occurs when you connect to Windows Update
    Best regards
    Michael Shao
    TechNet Community Support

  • HT2305 HOW DO I FIX ERROR 43  FOR MY iPOD CLASSIC ?

    HOW DO I FIX ERROR 43  FOR MY iPOD CLASSIC ?

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs?

    I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs. in order to start rebuilding my music collection?

    You should be able to recover the media with the tips in  this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into a newly authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That should switch the assocation of the device to the new library but it is not something I've personally tested.
    When you get it all working, make a backup!
    tt2

  • How can I install iOS 7 on my iPod touch 4th gen?

    How can I install iOS 7 on my iPod touch 4th gen?

    You can't
    . As Apple said in June, iOS 7 is not compatible with the 4G iPod.
    All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB

  • How can I add more memory to my iPod touch

    How can I add more memory to my iPod touch?

    You are not able to add memory to a iPod Touch.
    The only way to get more memory is to buy one with a larger capacity.

  • We are evaluating the use of iPod touch devices to record best practice videos on our manufacturing floor and to post to an internal Moodle web site. How can you upload a video from the iPod touch to a site other than YouTube?

    We are evaluating the use of iPod touch devices to record best practice videos on our manufacturing floor and to post to an internal Moodle web site. How can you upload a video from the iPod touch to a site other than YouTube? The Moodle upload interface is expecting a file selection dialog box like windows or OSX. I do not want to have to go through an intermediary step of messing with a pc.
    Thanks!

    It should be around 7 and a half gigs. In iTunes, across the bottom there should be a bar that show how much storage is being used and by what. (music, movies, apps, etc.) To make music take up less room, you can check the box to make it convert the music to 128kbps AAC. This lowers the quality, but with most earbuds and speakers, you can't even tell the difference.
    The iPod touch has parental controls built in. You'll find them in Settings. I think they only work for enabling/disabling Safari, Mail, YouTube, and App Store. Here's an app that does more: http://www.mobicip.com/online_safety/ipod_touch

  • How can I manage more RAM on my iPod Touch 4G ?

    How can I manage more RAM on my iPod Touch 4G ?
    My iPod Touch 4G used to have 120MB of free RAM, but it suppost to have 256MB of RAM...120MB is totally not enough for the applications and the iOS to run smoothly...my applications always close in a sudden and the iOS is extremely lag...
    I'm thinking is there anyway to manage of free more RAM on my iPod Touch 4G, I wanna free at least to 150MB...
    I've tried iMemoryEnhancer, Mem Tool, Daemon Tools and Memory Free; but none of them work...I've also tried simply click on Free Memory on SBSettings...but all applications came out with the exact same result...120MB...
    My iPod Touch 4G is running on iOS 4.3.1(8G4) and got 277 applications installed with around 10 Cydia tweaks..so please can anybody help me out ?
    TYVM

    try these
    1. quit apps on MT bar
    2. restart your ipod
    also, how many G(or M) have you used in the ipod, and how many G do you have in orginal?
    Calvin

  • As a grand parent, how can I put some apps on an ipod touch and then give it as a gift?

    As a grand parent, how can I put some apps on an ipod touch and then give it as a gift?

    Apps and many other purchases are tied to the iTunes Store account via which they were purchased. So if you buy the app, that app is tied to your iTunes Store account. Without that account information, the child could not update the app nor back it up.
    I'd also suggest giving the child an iTunes gift card or gift certificate along with the iPod. If the child is too young to have and manage his or her own iTunes Store account, then his or her parent could set up an iTunes Store account to purchase the apps. That could be done with that gift card and not need a credit card. You can also gift specific apps, though again that would require the child or a parent to open an iTunes Store account through which to redeem the gift. For more information on gift options, see:
    http://support.apple.com/kb/HT2736
    Regards.
    Message was edited by: Dave Sawyer

Maybe you are looking for

  • How to reset paths (NOT missing photos)

    I have created a new folder with all my photos. Within it are individual folders named by year (2013, 2012, 2011, 2010, 2009...). I have several old catalogs with photos pointing to different files on several external HDs.  I want to relink them nice

  • I have a brand new Mac Pro Tower that continually kicks me off the internet and sometimes starts up not connecting to the internet?

    My brand new Mac Pro Tower that I spent a small fortune on sometimes boots up and does not connect to the internet when every other computer in my office does and other times it just kicks me straight off. My question is, is there a problem with the

  • Requirement for Gate Pass Imprtent Requirement

    Dear All, the Customer is asking for the gate pass entries to be entered into the system . as you all know there is no std sap transaction for creation of gate entries in sap . this has to be customized . types of gate pass used here is both returnab

  • No cut and paste function?

    hello, coming from a window world, i don't know all about mac. i was surprised not to found the cut and paste option on leopard. is it me or it doesn't exist ? thank you

  • OSB Proxy design

    Hi All, I am developing a OSB proxy to read from JMS queue and write the message to another JMS Queue. while writing to JMS Queue if the JMS server is down, the proxy should retry for 3 times and then it should go to sleep mode for 20 minutes. After