How can i fix "invalid processor microcode update" i have a compaq dc7600 cmt C2C6260Q93

My m/c is a HP Compaq dc7600 CC2C6260Q93).
 I've replaced the 2.8 processor with INTEL(R) PENTIUM (R) D CPU 3.00 GHZ/4M , during start-up it gives the message "missing or invalid processor microcode update"
 My motherboard is HP (C)2005 HP DC

Hi:
Please see my reply to your other post at the link below.
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/how-can-i-fix-quot-invalid-...

Similar Messages

  • How can i fix "invalid processor microcode update" i have a compaq dc7100 cmt

    My m/c is a HP Compaq dc7100 CMT(DX438AV).
     I've replaced the 2.8 processor with a P4 HT 3.4ghz 1M/800 SL7PY , during start-up it gives the message "missing or invalid processor microcode update"
     My motherboard is HP 0968h . My Bios is...  Version : 786C1 v01.05
    I looked at specs for the board and i think it supports this chip, can anyone help fix this problem
    Thanks..
    This question was solved.
    View Solution.

    Hi:
    Now that you installed the latest microcode update, may I recommend you install the Pentium 4 650 3.4 GHz?
    That processor has double the L2 cache as the one you installed, and you can run a 64 bit operating system on it.
    If you have the CMT, you have a pretty wide assortment of video cards you can install so you can run all of the features of Windows 7.  The onboard GMA 900 video won't run Aero. Just keep within the power supply limit of 345W
    I have W7 x64 on my dc7100 CMT and an ASUS nVidia 8400GS 512 MB fanless video card in mine, and everything works great. Recommended P/S is 300W for the card so I was fine.
    The P4 650 is pretty reasonable on eBay. That is where I got mine.
    http://computers.shop.ebay.com/CPUs-/164/i.html?CP​U%2520Type=Pentium%25204&rt=nc&LH_BIN=1&_nkw=650&_​...
    Paul

  • My ipod disabled itself for 23 million minutes. How can I fix it if I don't have itunes on my computer?

    My ipod disabled itself for 23 million minutes. How can I fix it if I don't have itunes on my computer?

    A computer with iTunes is not required
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You need the iPod and iPad conencted to the interned and FindMyiPod turned on on the iPod an the iPad need to have the FindMyiPhone app installed. That now requires iOS 7 on the device.
    You can also wipe by on a computer/s browser, going to icloud.com>FindMyiPhone

  • How to fix "1801-Microcode Update Error" in HP Compaq dc7600 Minitower

    Dear Sir,
    I am using hp compaq dc7600U  with pentium (R) 4 3.00 GHz. processor. When I changed the processor with Pentium D 3.4 GHz. processor I found a message " 1801 Microcode Update error" Press F1 to continue. After pressing F1 computer works normally. I want to know that how I can remove this error message. 

    Please see my reply to your other post at the link below...
    http://h30434.www3.hp.com/t5/Desktop-Hardware/how-to-fix-quot-1801-Microcode-Update-Error-quot-in-HP...

  • Lately pdf files from the Web do not display properly; what is wrong and how can I fix it so I don't have to use IE?

    I am a professor and frequently need to open pdfs of academic journal articles from electronic databases. Within the last two or three weeks, when I try to do this using Firefox, only the first page of the pdf displays and the rest are blank. In addition, a bar appears across the top with the message "This pdf file may not display properly." So I have had to switch to Internet Explorer to open the files and do my research. What is going on and how can I fix it so I can open pdf files from the Web in Firefox and have them display properly?

    My question is simple - why would you put an application in production that has a lot of bugs? To replace a good and steady Adobe product? My customers will believe that I put a pathetic fallible form online. They are not sophisticated on computers so I just tell them to use IE. Ugh
    I must agree with pgwebgirl!

  • My IPad Retnia does not charge when plugged in using the USB from my computer to car adapter, how can I fix this to be able to have flexibility in charging?

    When I plug me IPad into the USB connector to my laptop or into my car charger, it show as not charging. How can I fix this so that I can charge my Pad in these settings?

    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    And this - Unplug the charger from the iPad and then replug. May resume charging.
    Or - Recalibrate the battery. See link below.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • HT1459 My daughter forgot the password to her IPod & disabled it.  How can I fix this? I do not have the serial number because it was purchased used!

    My daughter reset her IPod and after doing so the Ipod asked for a password.  We do not have a serial number for the Ipod as it was used.  The IPod is now disabled.  How can I fix this?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • How to fix "1801-Microcode Update Error" in HP Compaq dc7600 Convertible Minitower

    Dear Sir,
    I am using hp compaq dc7600U  with pentium (R) 4 3.00 GHz. processor. When I changed the processor with Pentium D 3.4 GHz. processor I found a message " 1801 Microcode Update error" Press F1 to continue. After pressing F1 computer works normally. I want to know that how I can remove this error message. 

    Hi:
    You need to install the microcode update by using a bootable flash drive with the common MS DOS Command files and the contents of the microcode flash file included on the bootable flash drive.
    Then you type Flashbin.exe at the command prompt you get when you boot from the flash drive, and hit the enter key.
    Follow the on screen instructions to update the microcode.
    I have attached the tool to make a usb flash drive bootable and the MS DOS system files to copy onto the flash drive.
    See the 3 files below under Attachments.
    Unzip and copy the DOS  files without any folders to the flash drive after you run the HP tool to make it bootable.
    I have also zipped up and attached the microcode update files.
    Unzip them and put them on the flash drive too without any folders after you make the drive bootable.
    Attachments:
    SP27608.zip ‏1817 KB
    Dos System Files.zip ‏243 KB
    DOS Flash.zip ‏73 KB

  • After updating osx 10.9.2, I cannot type without curser leaving my field and making beeping noises. How can I fix this? After updating osx 10.9.2, I cannot type without curser leaving my field and making beeping noises. How can I fix this?

    I did the update and now my curser seems to leave my typing field and makes a beeping sound.  I then have to place my curser back to type some more.  I can no longer work in my excel spreadsheet because of this.  Is there a fix that I can install?  Please help! I also have to double click everything

    If it's slow on startup it would be extensions loading or LaunchDaemons starting up. 
    You should have a look in:
    /Library/LaunchDaemons
    /Library/Extensions
    You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. 

  • HT4528 I keep recieiveing an error message that reads "Cannot connect to iTunes store" on my iphone.......how can I fix this. I updated an app on my phone that was on my daughters itune account and it worked fine. Its only when I update my apps on my acco

    I can update apps that are on my phone though my daughters iTunes account but I cannot update my apps with my account. Please advise!

    If it isn't working on multiple networks and a restart didn't help, the next step would be to restore the iPhone. You may even have to try restoring it as a new device.
    If you don't want to restore the iPhone, you can try to avoid the problem by updating the apps in iTunes and then syncing them to the iPhone. Who knows, maybe the problem will go away after syncing one or two of the updated apps.

  • How can i fix my iphone 3gs when i have network issues after updating to IOS 6.1.3 and avoid the connect to ITunes screen?

    Im an owner of an Iphone 3gs.
    When I updated my software to IOS 6.1.3 I started having network issues such as my phone would go on searching, it would search for signal and then No service after few minutes it would restart and when its on again it would show me Connect To Itunes screen, I tried connecting but nothing happens and if I just leave it as it is it will just keep on restarting and showing the same screen sometimes I might get lucky and the phone will start working again but No Service and if I turn on my 3G for the times Im outdoors it will just restart again so 3G is also another problem I have got. Today I decided to take it to an Apple Store, the guy restored it and now what happens is that it switches on and is showing me the connect to Itunes message but with black backround and i cant do anything it keeps on restarting and showing the same thing. Please if there is anyone that would like to spend some time with me to help me out, he would be more than Welcome.
    Im located in South Africa

    iOS: Device not recognized in iTunes for Mac OS X

  • How can I fix Extension Manager CC update fail? (U44M1l210)

    Update is unable to extract downloaded files. I've retried numerous times, but get the same Update Failed message.

    U44M1I210 - Creative Cloud Help / Error U44M1I210 | Install updates :
    http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • HT2963 How can I fix permissions problems now that I have changed permission on my HD and have error code -8076, locked disk or ....?

    iMac v10.7.4. Error message says disk is locked. Permissions set for read/write admin (me). Can't open iTunes, Mail, photoshop, adobe bridge [you do not have permission!]. Fonts in Word are unexpected, not cambria. Used Disk utility to repair permissions (ran it twice, once before reinstalling photoshop from DVD; once today). Situation worsening.

    Permissions problems occurred after I downloaded Lion update on 6092012. I believe the  problem originates with  Lion (see the 19 pages of posted problems in the community). I have now talked with Apple Support rep and an Apple Genius. Have reinstalled Lion from the HD Recovery disk. I see some improvement but also at least one  new problem: TimeMachine apparently has lost all backups, don't know how or why. Will have to take machine to a mac specialist or wait for Mountain Lion to arrive. Lion is a bad cat.

  • FCP X has cashed my FCP Studio 3. How can I fix this? Would like to have FCPX and FCP 7 seven both running, how do I do this?

    Can anyone tell me how to repair my FCP 7? Motion five error came up, now I can't use FCP 7 anymore, not even after reloading FCP 7. I would like to run both FCP7 and FCP X, how does one do so?

    The new and old versions of Final Cut co-exist pretty well if you follow the recommended installation practices.
    Good luck.
    Russ

  • HT1222 When i try to record a video with my camer or want to facetime with someone, the sound is very low, my normal sound like sounds of games do work. How can i fix this.? I already have the latest ios and i am using the ipad mini.

    Help me please!

    Hi,
    If you have not already I would change the Slide size to something that has a 4:3 Ratio.
    The Buddy maybe trying to scroll left and right to see the whole slide although this shoud be controlled at you end.
    I would open the Connection Doctor during a Chat  (iChat's Video menu).
    Check that both Bit Rates are relatively stable (there is always some variance.)
    Anything over 5% particularly if over 500kbps is likely to be causing problems.
    You could try limiting the Bandwidth (iChat Menu > Preferences > Video section) to 500kbps at both ends
    It may pay to drop to 200kbps as a test.  (you may lose the Side by Side presentation at this speed).
    10:12 PM      Tuesday; June 21, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for