How can I fix these messages, How can I fix these messages
Hello,
Since many days my Mac mini late 2009 under Lion server 10.7.5 very slow to response to commands (mouse click, move windows,...)
When I take a log into the log server I found these lines (every minute)
Jan 26 19:42:47 uranus com.apple.launchd[1] (com.apple.gw_controld[412]): Exited with code: 255
Jan 26 19:43:00 uranus com.apple.launchd[1] (com.apple.gw_logd[426]): Exited with code: 255
Jan 26 19:43:01 uranus com.apple.launchd[1] (com.apple.gw_datad[429]): Exited with code: 255
Do you have any ideas how to fix it or where I can look into check, and so on
Thanks in advance.
hi
when i checked the parameter shadow_core_dump=full and
cursor_space_for_time=false.If i set this parameter cursor_space_for_time =true and shadow_Core_dump=partial
is there any change in perfomance and especailly what basis we will set this cursor_space_for_time parameter
with regards
ramya
Similar Messages
-
After my last software update I can no longer access my mail. message displayed says "you have mail version 4.5 this cannot be used on Mac OS X Version 10.6.8 . How do I fix this???
See possible fixes here.
https://discussions.apple.com/message/19760703#19760703
https://discussions.apple.com/thread/4311280?tstart=0
https://discussions.apple.com/message/19710911#19710911
Some have reported success simply by reinstalling the update.
http://support.apple.com/kb/DL1586
Or download and apply, or reapply, the 10.6.8 Combo update first, then apply the Security Update again.
http://support.apple.com/kb/DL1399
I'd suggest starting with the simplest of these fixes, so look them over first. -
I just tried to update my IPhone from IOS 6.1.3 to the newest software and I am getting an error message "3004" and don't know how to fix this so I can update my phone. Please help!
http://lmgtfy.com/?q=iphone+error+3004
P.S.
These are user to user forums. You are not addressing Apple by posting here. -
since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?
A Davey1 wrote:
Not a nice answer!
Posting "Check the 'More like this'" area and not simply providing the answer is a great way to make these groups worthless.
You're ignoring context. On the old Apple Discussion Groups I never posted replies like that, instead giving people relatively detailed answers. The new Apple Support Communities made things worse by introducing certain inefficiencies. Then came Lion. The flood of messages that came with Lion required a painful choice for any of the people who had been helping here: (1) Give quality responses to a few questions and ignore the rest. (2) When applicable, give a brief answer such as the one that you found objectionable. (3) Give up all the other normal activities of life and spend full time trying to answer questions here.
People who needed help with Lion problems seemed to have trouble discovering existing message threads that described how to solve their problems. I never posted the suggestion of "Check the 'More like this' area" without verifying that the help that the poster needed could be found there. Even doing that, what I posted saved me time that I could use to help someone else.
The people helping here are all volunteers. None of them is being paid for the time they spend here. They all have a life outside of Apple Support Communities. It's arrogant of you to demand that people helping here spend more time than they already do. -
I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?
Hey bill.rizzo2,
Thanks for the question. I understand your phone number is missing on your iPad as an option for iMessage. The following article provides steps to resolve this issue:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Phone number missing on iPad or iPod touch
If your phone number isn't listed on an iPod touch or iPad, follow these steps:
1. Update to the latest version of iOS.
2. Verify that you're using the same Apple ID that you're using on your iPhone.
3. On your iPad or iPod touch, sign out of your Apple ID in the following locations:
- Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
- Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
4. Sign in to your Apple ID with FaceTime and iMessage.
If your phone number still isn't listed, follow these steps:
1. Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
- Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
- Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
2. Sign in to your Apple ID on your iPhone.
3. When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and Settings > FaceTime.
4. Sign in to your Apple ID on your other iOS devices.
Thanks,
Matt M. -
How can I fix my mac mini g4 1.5ghz which gets the must reboot message? what is the reason?
How can I fix my mac mini g4 1.5ghz with 2gig ram which gets the must reboot message randomlly? what is the reason? Hard disk has no errors.
Based on your description, you are having a kernel panic.
Can you post some of your crash logs? Might be a clue. See Mac OS X: How to log a kernel panic http://support.apple.com/kb/HT2546
Understanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html Also look at Tutorial: An introduction to reading Mac OS X crash reports
http://www.macfixit.com/article.php?story=20060309075929717
Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices except your monitor, keyboard and mouse. Do you experience the same problems?
To eliminate RAM being the problem, Look at this link: Testing RAM @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc (the AHT is on the Install/Restore DVD that came with your Mac)? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
May be a solution on one of these links.
http://docs.info.apple.com/article.html?artnum=106227 What's a "kernel panic"? (Mac OS X)
http://www.macmaps.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.index-site.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.thexlab.com/faqs/kernelpanics.html Resolving Kernel Panics
http://www.macfixit.com/article.php?story=20060911080447777 Avoiding and eliminating Kernel panics
http://macosg.com/group/viewtopic.php?t=800 12-Step Program to Isolate Freezes and/or Kernel Panics
Cheers, Tom -
We are using CSS 6 (not Cloud) for our yearbook. Starting today pages are giving message that we are missing a bunch of plug-ins so files can't open. How can I get these plugins? Why is this happening?
We are using CSS 6 for our yearbook. Starting today pages are giving message that we are missing a bunch of plug-ins so files can't open. We are 2 weeks from printer deadline so thia has to get fixed fast. We didn't update anything with the program. We ca
-
I just installed Photoshop elements 11. Install of the application was fine. When I clicked to open Organizer, I received a messaging indicating that it was out of date and coudl not be upgraded. How can I address/fix this?
Thank you for the replies. I'm afraid neither one helped.
kglad, I never get to any error code so your link can't help.
Jeff, I looked at your link and
a) again, I never make it to an error code
b) I'm definitely connected to the internet
c) I can access secure sites; I tried connecting with the firewall disabled and the same thing happened, so I don't believe it's a firewall issue.
d) I don't understand the checking host sites - this is far too complicated for a novice user. It should not be this difficult to get a software running. I don't want to mess with these kinds of settings.
e) I followed the steps for the global sign in root CA and my screen looks the same as the picture here.
I can't activate the software offline as there is no option to generate a response code when I click on having trouble connecting to the internet. All I get is a prompt to change my password.
If the problem were simply connectivity from my computer, then why does the box completely freeze? Can't cancel, can't click on the little X to close it, can't right click on the box to close it. I have to reboot every single time. I know others have had the same problem and I haven't found any answers that I could apply.
I don't understand for the life of me why Adobe does not have TELEPHONE customer support. I have spent 2 days on this, this is crazy. -
When I open iCal, I get the message 'The file name is invalid.' Can anyone tell me how to fix this?
When I open iCal, I get the message 'The file name is invalid.' Can anyone tell me how to fix this?
These latest Flash is corrupted. Adobe has acknowleged the problem. The following Adobe Forum message may be of help to you:
http://forums.adobe.com/message/6288150 -
Error message (-51) keeps coming up when I try to send music from iTunes to my iPhone and then the music won't come over. How can I fix this message?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
How can I fix an invalid sibling link error message without my original install disk?
How can I fix an invalid sibling link error message without my original install disk?
Hi Jeff,
It's not even likely the Install Disc could fix that, but if you want to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
You must repair the HD, your best bet is likely DiskWarrior.
BTW, you might enjoy these DiskWarrior review/recommendations...
http://discussions.apple.com/thread.jspa?messageID=9645801�
http://discussions.apple.com/thread.jspa?messageID=10541019#10541019
http://discussions.apple.com/thread.jspa?messageID=11918925�
http://discussions.apple.com/thread.jspa?messageID=12684129#12684129
http://discussions.apple.com/thread.jspa?messageID=12744794�
http://discussions.apple.com/thread.jspa?messageID=12912879#12912879
Finally, you should run DiskWarrior if your Mac explicitly warns you of a problem with your disk in the form of an error message. Most of these errors are reported by the built-in Disk Utility whether your Mac OS X version is 10.3 Panther, 10.4 Tiger, 10.5 Leopard, 10.6 Snow Leopard or 10.7 Lion. Here are some of the most common messages:
Disk Repair: The disk was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible.
The underlying task reported failure on exit.
Invalid node structure.
Keys out of order.
Invalid key length.
Invalid directory item count.
Invalid extent entry.
Invalid record count.
Invalid index key.
Invalid sibling link.
http://www.alsoft.com/DiskWarrior/details3.html -
All messages are marked as spam, 5.7.1 ? how do I fix this, I can receive messages but cant send.
All messages are marked as spam, 5.7.1 ? how do I fix this, I can receive messages but cant send.
Oh with the rot that goes on with emails and spam filters these days almost anything can be considered spam. Mail addresses to your self can be all that is required for it to be spam on some systems, so test using your email address to check it is working must be done with an account not hosted bu the same provider, given the web site is not blacklisted.
I checked before replying, as brand new web sites are often blacklisted because they share a server or IP address range that is blacklisted (Poor neighborhood) or the server is run from a dynamic IP address and therefore considered to be a home computer with an infection.
One thing you can try is go to the account settings on the tools menu, open the settings pane by clicking on the account name and removing any reply to address. (some spam filters get all excited about reply to addresses. If that does not work I suggest you contact hostbox for a more detailed instruction on why your mail is considered "confirmed spam".
But please let us know how you get on. -
I'm unable to open Safari. I keep getting a alert security message Suspicious Activity Might Have been Detected. How can I fix this problem?
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?
Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?
-
When i update to the latest version (7.0.3), there is a message appear to me when i open any application that contains notification such as (What'sApp or BBM) , this message said (Connect to iTunes to use push Notification) , How I can to stop these messages that appear to me constantly?
Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks
Maybe you are looking for
-
No alternative unit of measure specified
Hi, We are encountering no alternative unit of measure specified upon confirming the process order in COR6. What might be the problem. The base unit of measure is properly maintained in MM. Base unit of measure is Btl and the unit of issue is case. H
-
Hi all, Please, I'm doing a release strategy for Req. with caracteristic price (EBAN-PREIS) and with a range of values: > 0,00 - 500,01 > 500,00 My release don't work, I don't know where I wrong... Thank's
-
My iPod Touch 4G is stuck on White screen.
I have tried the home and wake button press lots of times and nothing. Any suggestions?
-
Hi, i was wondering when the new year sale ends for creative items its not shown on the website
-
Migrate print server from Windows 2000 to Windows 2008 R2
Hi, Want to transfer NTFS permission of printers from Windows 2000 to Windows 2008 R2. Any method can do it ?? Thanks