How can I fix this bizarre translucent windows problem?
I have a 13'' Macbook (aluminum) running Mac OS 10.5.8. Recently I've encountered this problem:
All the windows behind the one in front are translucent (see-through). I can see the desktop behind them. If you would like to see a picture of this problem go to this link:
http://picasaweb.google.com/lh/photo/5H1ITzjT6gTzkpNodjudKcwFNwdJLw1S71Q7oB3uwDM ?feat=directlink
Thanks.
HI and Welcome to Apple Discussions...
Run the Apple Hardware Test
Could be a graphics card problem.
Carolyn
Similar Messages
-
I went to my add-ons tab, and I DO, in fact, have two versions of shockwave flash, an 11.9...version, and a 13.9..., which, if I'm not mistaken, is the latest version. There is a "ask to activate, always activate, never activate" button for EVERY add-on. I clicked never activate on the older version, and closed the tab. I then tried to play a video off of the Web. It would not play, I tried another site with the same result, so I went back to my add-on tab, and the button for the older version had changed back to "always activate" by itself. It continues to repeat this, and WILL NOT stay on "never activate". Every few times I return to the add-ons page, THE NEW VERSION IS DISABLED, AS WELL AS THE OLD ONE. I've tried to uninstall the old version, but when I go through control panel, and bring up the folder contents, the old version isn't even there! I've done start, find, and typed in "Adobe", and the old version is NOT FOUND! Both versions keep changing back and forth on the activate button, and they both will disable on their own, no matter how many times I fix it! smh!!
@jscher2000: Didn't mean to lose contact. I still don't have my playback problem solved, if you can believe that. I've downloaded the uninstaller / installer links with someones help that's on this forum, used them in the exact same order. It did nothing to help. However, I was in the process of attempting your solution. I made sure all browsers were closed; in fact, I went offline before this procedure. When I used find, and typed in Shockwave, it came back..."no search results". I recalled a path I had previously used, and had to use it instead of find, C:/ Acer/ Windows/SysWOW64/ Macromed/ and here there were files for Shockwave AND Flash. I opened Shockwave, says " this folder is empty". Flash Player and Flash Util plugin, Util32 Active X, NPSWF32_13_0_0_214.dll...all files appear correct, BUT why aren't there ANY files in the Shockwave folder? NONE of the buttons you describe in your steps to let Firefox "clean up" the pluginreg.dat file show in my window...if I am in the right window. My username is at the top, and it's drop-down is "3 button"+sign out. One says settings, but it doesn't take me to any "help", Trobleshooting info, "show folder", nor any way to exit Firefox or to start it back up. Settings goes to "edit settings", and has a list of checkboxes...all with something to do with threads in one aspect or another, and one concerning private messages. Sounds to me like I don't know what I'm doing, am on entirely the wrong Mozilla /Firefox page, and I'm NEVER, EVER going to get this damn video playback crap fixed once and for all. Some sites will let a video play, but they are rare. Vikings.com is the one that has me red-faced. NOTHING plays there. Except ads, of course. You can't get those to STOP.
-
Over the last few day the interent has been crashing with the following response - "plugin container for firefox has stopped working." Why and how can I fix this issue?
Same problem here. Firefox keeps freezing, sometimes for 5 minutes, then either starts working again really slowly or I get the plug-in error crash. This last time I copied what windows said about the error. This is the info:
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 1.9.2.3814
Application Timestamp: 4c12b3be
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e03821
Exception Code: c0000005
Exception Offset: 00048b02
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: ca4b
Additional Information 2: 0db6cc4f646c2246ddf8a462e3add7af
Additional Information 3: 5b21
Additional Information 4: e5b7e758762c24b02e09abea0b4585f4
Don't know what it means or if it will help solve the issue, but thought I would share it.
All I know is that I am about to do something I never thought I would, switch to Chrome. -
My wife's nano no longer is recognized by Windows but my ipod touch is? How can I fix this?
My wife's nano no longer is recognized by Windows but my ipod touch is? How can I fix this?
My iPod touch is always recognized by my Vista Box...using the same USB cable and port my wife's nano isn't detected anymore. Since Vista can't see the nano iTunes can't see it either. When I try my wife's nano I get the message:
"One of the USB devices attached to this computer has malfunctioned, and Windows doesn't recognize it. For assistance in solving this problem, click this message"
I thought her nano wasn't charged enough but I've charged it for hours and this doesn't make a difference. It used to synch like my ipod touch but it stopped working about a week ago. My wife's nano still holds songs and works it just can't be recognized by Windows. I even checked if the Apple Mobile Device app was running and it was and I stopped it and restarted it. Didn't make any difference. Any ideas? -
All of a sudden I can no longer open tabs by clicking "+" or right clicking on the tool bar. To open a new page, I have to open a whole new Firefox window. How can I fix this?
Also, Firefox crashes frequently. Is there a fix for this also?Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox 3.6 that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons
For the second issue, the [[Firefox crashes]] support article may help. -
I have iTunes, latest version, open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice but problem continues.
Try contacting iTunes via email to check if there is an issue with the account. go to apple.com/support/itunes
Click on iTunes Store account and billing and select inquiries. On the right side click on "email us".
Before doing that trying viewing your account information first. Open the iTunes on you mac, look at the menu and select store and select view my account. Try removing the card (this is only applicable if you don't have a pending charges with iTunes) and hit done. Sign out, quit iTunes and sign back in and try updating the apps again. -
A pop up window opens when I try to open safari, however, I can't exit out of it, nor can I continue using safari. How can I fix this? (the iMac was purchased summer 2011 and all updates done). Thanks.
I had the same issue and I found turning off safai extensions fixed the issue. Must be an extension that's causing this problem.
-
since installing the latest version... when I open a new window it opens everything I have minimized too... very annoying. How can I fix this, I minimize to go back to a window not have multiple windows open.
== This happened ==
Every time Firefox opened
== after installed last version...Well, then isn't there some way to induce Firefox to give Windows parameters that make it open the fershlugginer window in the *same* position, instead of an offset position?
Dafydd -
I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?
No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest. -
When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?
if your computer does not support the operating system you wish to install in bootcamp then you have to use a virtual machine like virtual box to install the operating system you wish to install
-
Clicking a link opens a smaller window, not a maximized window, how can I fix this?
When I click links that open in a new window, that new window is not maximized, like the browser window that I used to click the link. How can I fix this?
I prefer using new windows instead of new tabs, and I have been doing this forever. I had turned OFF the automatic updates for Firefox, but this newest update was installed anyway. If there is no setting to open all new links in windows the same size as the main window, is there an option to revert this update?Hi Mumps,
There is a feature in Firefox that forces window.open() to open in a new window.
browser. block. target_new_window
Reference (http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries)
Same window size should be default. It should open the window of the same size. Try to reset firefox if this is not happening. (about:support page > Reset) -
I downloaded Safari 5.1 onto Mac OS 10.6.8 some time ago. Yesterday the back/forward arrows next to the url window changed to a +, which adds the current url as a bookmark. I want the arrows back. What happened, and how can I fix this? Thanks. kammro
There's another way.
Right or control click the + then click Remove Item.
Just remembered that keyboard shortcut!
You're welcome -
When I open a new window (App etc) the windows already open disappear. How can I fix this ?
Back up all data.
Please triple-click anywhere in the line below on this page to select it:
defaults delete com.apple.dock single-app && killall Dock
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Test. -
I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this? I have uninstalled and reinstalled it several times and it still doesn't work.
What computer do you have? is it 32 or 64 bit operating system?
-
Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?
giadad,
It sounds as this issue:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/
Maybe you are looking for
-
Unable to connect with Kuler Air app and Extension
Hi, I am unable to connect Adobe Kuler Desktop(Air app). I can't login through the app. Only thing I can see when I launch the app is the RGB rotating, even after an hour. I tried reinstalling the app two three time. No way. same issue persits. I tri
-
Installing AS 10g (10.1.2) on Windows 2003 Server
I have problem installing AS 10g (10.1.2.0.0) on Windows 2003 Server. Installation seems to be ok, but when I tried (on server) to go into Enterprise Manager (EM), I wasn't asked for password, only blank page was shown. So I tried enter EM on worksta
-
Is bridge free when Photoshop and Lightroom is installed?
I have CC 2014, Photoshop and Lightroom installen but it is not clear to me if Bridge is included. Does the installation increase the annual price? Awaiting your reply. Arie
-
Is there a way to have a dynamic Navigation List i.e. based on a SELECT statement?
-
G/L Account assignment - Planned delivery cost
Hi, Is it possible via customizing to determine an other G/L Account for a planned delivery cost condition? Currently when I want to post the IR I can see two lines for the PO item. One for the cost of the material and one for the delivery cost. Howe