How can i fix this wireless issue?
My problem is, few days now my wireless router either not showing my SSID or give me Worst signal even though im far from it like 5ft.,it sometime load fast then right back slow.
but when i run a speed test on verizon website i get a decent
21Mbps download and 15mbps upload
and this happen to almost all my devices, tivo, iphone, xbox360 and laptop.
how can i fix this problem.
this is the first issue that i have with this router.
Im currently using a
Firmware Version: 20.10.7.5 Model Name: MI424WR-GEN2 Hardware Version: E
Solved!
Go to Solution.
Ptnguyen wrote:
My problem is, few days now my wireless router either not showing my SSID or give me Worst signal even though im far from it like 5ft.,it sometime load fast then right back slow.
but when i run a speed test on verizon website i get a decent
21Mbps download and 15mbps upload
and this happen to almost all my devices, tivo, iphone, xbox360 and laptop.
how can i fix this problem.
this is the first issue that i have with this router.
Im currently using a
Firmware Version: 20.10.7.5 Model Name: MI424WR-GEN2 Hardware Version: E
change the wireless signal. you can do that in the router. open a browser, and go to http://192.168.1.1
user name is admin. and the password is most likely the serial number found on the service tag of your VZ router unless you changed it.
}Once you login succesfully, go to the top and hit wireless, then on the left basic security. then go to option 3 which is channel
1, 6 and 11 and are the only channels you should try.
So it will likely be set to auto, change it to 11 and put the check for keep settings even after reboot (Directly under the channel) and then hit apply.,
after you hit apply, test your connection out, if you notice a difference, leave it like that until the problem happens again, and if it happens again, go back into the router, and try channel 6, test it out. and then finally 1 if the first two don't work.
Also take a look at page 2 of Actiontec's Wireless PDF File. It gives you some idea's with regards to position and orientation of where the router sits and how it can best be positioned for maximum coverage.
Similar Messages
-
Trusty iPod Classis now says no music yet shows 40 megs of storage. How can I restore the music on my iPod?
See the first section of Corrupt iPod classic. If the media files aren't visible in the hidden folders then it may still be possible to use an unerase/undelete or other file recovery tool.
tt2 -
How can I fix this camera software issue?
My iPhone 5 was most recently updated to iOS 7.1, and now my rear camera is showing up black. The front camera works, however it freezes when I attempt switching back to the rear camera. How can I fix this software issue?
Please Help.RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).
Then try the camera again -
My polygonal tool finishes before I'm ready. The screen jumps, then the tool makes a selection on it's own. How can I fix this annoying issue?
See if this works:
Re: In PSE 10 - the lasso tool begins then quits -
I purchased a season of a TV show from itunes and it won't go onto my ipad, i've purchased several seasons in the past and never had this issue, how can i fix this?
Drew how is that even possible? I use gift cards all the time, any time I've had insufficient funds iTunes will not allow the purchase, sights Insufficient funds and rejects the purchase. Any time I log into my account the money in that account appears in the upper left corner. If you're not seeing that then you have other issues. Anyway... Kneil is right you should be able to rip CDs you own to your iTunes library (regardless of your money matters with iTunes), then depending on how you set up the music you need to add it to your playlist and then sync it to your iPod. Did imported music ever work? How are you ripping or importing the music to iTunes? Are you using a compatible format?
Something else to look at-- It's possible your cable is defective, have you tried a new or different cable? Some of what your describing is a bad cable issue. Good luck, Cheers. -
Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when iall other programs are closed. How can I fix this issue?
Thanks Jeff, I was not aware that a template could be multi-page. (All the existing templates were 1 page)
But it worked, saving me some steps. When I was finished I renamed the document, and locked it.
Then tried to save it but could not because it was locked. I closed it, went to my Spread Sheet Folder ,
to find it, it was not there. The Finder could not find it either.
So I start over again.
I opened up Numbers and it showed my personal Numbers template folder, it contained both my new
original 4 page template and the vanished saved document!
I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again. I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
The secret is: Click on the document title in the menu bar, and it opens up "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving. Once done that, you can then lock the document in the same pull down menu, and then close it.
I also found later that I can delete a template from its folder, by letting Numbers open the templates,
clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
and from there the selected template can then be thrown into the Trash from there.
It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document. -
I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!
RESET YOUR ROUTER
No. Reset your router. -
My external Apple USB Keyboard letters doesn't work, but the numbers do. Why and how can I fix this issue? Also, When I open the Keyboard Viewer, the letters will highlight only if I hold the modifier key(s) "Control" or "Control and Option". I really need help with this. I don't have any other computer to try it on, so I will have to test it on a friends computer sometime. But perhaps solutions that I can try right now? Thanks.
Hello there, IDuncan23.
The following Knowledge Base article has some great troubleshooting steps you can follow to work on resolving your keyboard issue:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Thanks for reaching Apple Support Communities.
Cheers,
Pedro D. -
my wireless mouse moves the pointer but does not scroll, how can I fix this?
Check the setting in System Preferences > Universal Access > Mouse & Trackpad tab > mouse options.. button > check scrolling.
If you have an older mouse with the trackball, it might just need cleaning. Turn the mouse over and rub the trackball vigorously on paper or microfiber cloth.
Regards,
Captfred -
I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on. I've tried the holding of the home and power button but still nothing
iOS: Not responding or does not turn on - Apple Support
try this but maybe terminal if no result -
Hello, i'm trying to download the new verison of itunes, and im getting an error message: Apple mobile failed to start and c;runtime failed. how can i fix this issue
Hi Tatilopez86,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden -
I get an error code 50 when downloading digital movie. How can I fix this issue?
I get an error code 50 when downloading digital copy of a movie to my iTunes. I try to restart and still get the smae error code. I have my PC plugged directly into my modem and still get error, when trying to download failed movies. I have 5 failed downloads. How can I fix this issue?
Try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?
mr
Are you running the 9.0.1 Update of the program and on what computer operating system is it running?
Is your video card/graphics card driver up to date according to the manufacturer of the card?
Is your computer optimized, including maintenance of pile ups of preview files, conformed audio files, and conformed video files?
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 9.0/9.0.1?
What are your project settings and what are the properties of your source media? When you say that "used to be able to export...." is that on the same computer, same brand/model/settings for the camera recording the video now in use, same Premiere Elements 9.0/9.0.1?
Where player are you using for the playback of these exports?
Please give us more details on the size of the projects (then and now) as well as details of the customized export settings in your Share/Computer/ route. Premiere Elements 9.0/9.0.1 is only a 32 bit application running in 32 bit or 64 bit system. Not sure if computer resources might be taxed more so now than before.
More later.
ATR -
I have an iPod mini that I have not used for more than 3 years. I am trying to download music and it is giving me a warning sign. How can I fix this issue?
patrishafrombrooklynTry:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
When i move my wireless mouse the whole computer screen moves. How can I fix this?
Welcome to the Apple Support Communities
It looks like zoom is turned on. To turn it off, open System Preferences > Universal Access, and turn Zoom off
Maybe you are looking for
-
Does anybody know how to turn off the pics of your Game Center friends that show while you're playing a game?
-
Hey all Nevermind! cheers Message was edited by: syncro
-
ITunes store item availability in Canada
I realize this isn't really the right place to ask this, but there is no where else to go! I want to buy a movie that is available only on the US iTunes store - not listed as available in Canada. My question is - can I get around this somehow (and I
-
Loading Images with 1.3.1 Problem
Hi! I've got a couple of swing applets that use Images. One uses the images for icons and one just draws the images. The images are loaded from jar files. Using version 1.3.0, everything works fine. When I load the applet using 1.3.1 or 1.4, however,
-
Hi all, Cisco CUCM 9.2 Cisco UCCX 9.0(2) I can't implement call recording via Cisco Desktop Agent. I created users/agents, assigned them primary and IPCC extensions (the same number). Add user to CSQ and assigned skills. CAD can manage user phone, ma