How can I flash my Windows Mobile 6.5.3 ROM to Firefox OS?

Hello. I am the very last user running Windows Mobile 6.5.3, the old and abandoned operating system by Microsoft. As a Mozilla's enthusiast, I am really interested in using Firefox OS, however I can't find any ways to install such OS into my phone. May I know any guide on how to put Firefox on my Sony Ericsson Aspen?
Device specifications are as follows:
- Sony Ericsson Aspen
- Running Windows Mobile 6.5.3 (Original OEM ROM)
- Qualcomm MSM7227 CPU
- ARM11 with the speed of 600MHz
- 256MB RAM
- Flash size is 512MB
- Data Bus 32bits
- Internal Storage 267.39MB
- Display is QVGA (320x240)
- Colors 65536
- Bluetooth is 2.0 with EDR and A2DP
A very professional ROM flasher is very welcomed to give me guidelines on how to achieve this. Thank you.

Check this article
*https://developer.mozilla.org/en-US/docs/Mozilla/Firefox_OS/Installing_on_a_mobile_device

Similar Messages

How can I zoom the Windows mobile reader to a specific %?

How can I zoom the Windows mobile reader to a specific %?
The Windows mobile reader has a VERY poor zoom
It only has a slide bar & has very poor increments, like if I'm at 33% the next step up is 50%
on a mobile with a small screen you need every extra bit you can get so
PLEASE !!!
allow us to put in a specific % to zoom to (in increments of 1)
How would I see what version I have?
How would I download the latest version to see if it has that improvement?
I don't see a download for the mobile version on your site

I change the user with a batch to SP01

How can I save the window size so that when I restart Firefox the size of the window is appropriate for my portrait mode monitor?

I have a 2 monitor setup with my second monitor in portrait mode. Whenever I start Firefox (on my 2nd screen where I always open it) I always have to resize the window so it goes down to show more info. I cannot figure out how to reset any type of default window size for the height and width parameters.

Hi,
From your post, I assume you are creating WebHelp output.
You need to create a window for the help in the Project Set-up pod. Then, you need to make sure you call the output so that the window is used. See http://www.grainge.org/pages/authoring/calling_webhelp/calling_webhelp.htm. This article on Peter's site give you an overview over the possibilities of calling context sensitivive webhelp and also tells you how to specify the needed window. Also, the installation directory of RoboHelp 8 contains a directory called CSH API. In there are example API's your developer can use to call the help.
Greet,
Willam

How can I install new windows on NB200-10z without a CD drive?

Hi,
I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
I would like to do a recovery, but it also doesnt work.
I know there is a shortcut like press the 0 button when the laptop is starting up.
With this shortcut you can start the recovery to reset the software.
But when I press the 0 button it gives me an error.
So I think the recovery drive/partition is lost.
How can I install new windows on this minilaptop without a CD drive?

I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
Before you begin, you will require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin
Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
+Message was edited: link has been removed+

How can I flash the bios of a MSI kt3 ultra2 without a floppy drive?

How can I flash the bios of a MSI kt3 ultra2 without a floppy drive?
I used the msi live update software to download the bios update programe...when I run it gives 2 options dos and windows
but the windows option is greyed out and the dos option requires a floppy drive (mine does not work)..what can I do?

I can tell you what you need to do but unfortunately - not how to do all of it.
You will need to make a bootable CD with the neccessary files on it .- Somewhere on the www you should be able to find the instructions. I have flashed from a CD with no problems on a K7S5A board . The CD image was available as a complete download and just needed burning to the CD so - apart from the obvious ( BIOS file , BIOS installer ,command.com,msdos .sys, io.sys)I don't know what else might be needed on the CD- unfortunately the disk I made is long gone.
I'm sure a search will find what you need to know.
Once you have the disk -just insert in CD Drive - restart and follow the instructions.
Dave

How can i reopen all windows from last session on safari 6?

how can i reopen all windows from last session on safari 6?
finally found it .... sorry ...
Response:
System Preferences > General
Uncheck "Close windows when quitting an application"
Close
Ensure you have empty the Homepage on Safari
Safari > Preferences
Homepage = empty

Or... from the Safari menu bar click History > Reopen All Windows from Last Session

How can I have multiple WINDOWS (NOT tabs) with INDEPENDENT content?

How can I have multiple '''windows''' (''not ''tabs) with '''independent''' content?
I used to be able to open separate windows with Firefox, and the content could be completely different in each window. No matter what I did in any window, no OTHER window open at the time, nor any of the content therein, was affected. This is no longer the case and it is extremely frustrating for me.
I do ''not ''like tabs and do not use them. I prefer multiple windows plus I am so used to using them, for so many years now! But with v9.0.1 I suddenly can no longer do what I've always done with my browser without this aggravating problem constantly reminding me that I can't have what I want in firefox anymore.
Or can I? Does anyone have a solution I don't realize exists?
Thanks,
Sowelu

AppleScriptObjC can use pretty much everything in the Cocoa API, so yes, it is possible.
Note that a view is not the same as a window, and a window can have multiple views. There are also many ways to implement "tabs"; take a look at some of Apple's applications - they use various mixtures of toolbars, checkboxes, and radio buttons, for example. An application such as this will be a lot more involved than what you have done so far though, using custom classes and subclassing existing ones, so be prepared to do a lot of reading and researching.

How can I change the window size of iTunes? Used to be easy before installing Mavericks.

How can I change the window size of iTunes on my iMac? Used to be easy before installing Mavericks.

If you want to make the itunes tab so you can see the dock
you press the
esc
button if your in full screen mode
if you want to get into full screen mode you press the arrows facing away from eachother in the top right corner
there is another way to get to the normal tab if your in full screen
make the curser go right up to the top of the screen and it will show the apple tab
it will have two arrows facing together highlited in blue
if u tap that it will take you to the normal tab

How can I sync my windows outlook address to my ipad 2

How can I sync my windows outlook addresses and calendar to my ipad 2?

When you connect your iPad in iTunes, click on your iPad below "DEVICES", then click the tab "Info" and define on that page what you want to do.

How can i install my t-mobile sim card to iphone 4

how can i install my t-mobile sim card to an unlocked iphone 4 gsm i got for Christmas?

Power off the phone. Use a paper clip to pop out the Sim Tray. Insert a Micro-SIM from T-Mobile or a regular SIM cut down to size. Re-insert the SIM tray. Turn the phone back on.
Keep in mind that 3G data, Visual Voice Mail, MMS messaging, and FaceTime will NOT function correctly on T-Mobile in the US. Some people report getting MMS to work, but you'll need to contact T-Mobile for assistance. T-Mobile in the US is NOT a supported carrier. Their network is not fully compatible with the iPhone.

How can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help

how can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help

Try a 2 finger Pinch to see the tabs.

How can I run a windows Cd on my mac?

How can I run a Windows Cd on my Mac?

Inside CrossOver Mac, Parallels Desktop, or similar products.
(67907)

HT5639 i use boot camp to install windows 8.1 but in the middle of the installation it is stop,how can i install the windows again?

i use boot camp to install windows 8.1on my mac but in the middle of the installation it is stop,how can i install the windows again?
why it`s stop?

What is your exact machine and what's the error

How can i Flash and restore the firmware ( EFI ) from a Macbook pro ( late 2008 , 5.1 ) ??

How can i Flash and restore the firmware ( EFI ) from a Macbook pro ( late 2008 , 5.1 ) ??
Please help me !!

The Seagate backup drive I bought doesn't support 10.5.8
The only reason I can see for that is it's formatted NTFS, which would likely be Read Only in 10.5.x, if you can reformat it MacOS extended, which would erase everything on it now, then that should work for your purposes.

How can I make a window show up in every desktop?

How can I make a window show up in every desktop so when a user switches views it's still on their screen, using Xcode, Applescript-ObjC?

hi, try this:
public static void centerWindow(Window win){
Dimension screenSizeWithSpeedBar = Toolkit.getDefaultToolkit().getScreenSize();
Dimension screenSize = new Dimension(screenSizeWithSpeedBar.width,screenSizeWithSpeedBar.height-25);
Dimension frameSize = win.getSize();
if (frameSize.height > screenSize.height)
frameSize.height = screenSize.height;
if (frameSize.width > screenSize.width)
frameSize.width = screenSize.width;
win.setSize(frameSize);
win.setLocation((screenSize.width - frameSize.width) / 2, (screenSize.height - frameSize.height) / 2);
It works with following arguments: JWindow, JFrame and JDialog

How can I flash my Windows Mobile 6.5.3 ROM to Firefox OS?

Similar Messages

Maybe you are looking for